From mboxrd@z Thu Jan 1 00:00:00 1970 From: jsmart2021@gmail.com (jsmart2021@gmail.com) Date: Wed, 19 Apr 2017 21:46:23 -0700 Subject: [PATCH-v1 04/22] Fix log message in completion path. In-Reply-To: <20170420044641.10657-1-jsmart2021@gmail.com> References: <20170420044641.10657-1-jsmart2021@gmail.com> Message-ID: <20170420044641.10657-5-jsmart2021@gmail.com> From: James Smart In the lpfc_nvme_io_cmd_wqe_cmpl routine the driver was printing two pointers and the DID for the rport whenever an IO completed on a now that had transitioned to a non active state. There is no need to print the node pointer address for a node that is not active the DID should be enough to debug. Signed-off-by: Dick Kennedy Signed-off-by: James Smart --- drivers/scsi/lpfc/lpfc_nvme.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c index 2a87428..bc6946f 100644 --- a/drivers/scsi/lpfc/lpfc_nvme.c +++ b/drivers/scsi/lpfc/lpfc_nvme.c @@ -787,9 +787,8 @@ lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn, ndlp = rport->ndlp; if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR, - "6061 rport %p, ndlp %p, DID x%06x ndlp " - "not ready.\n", - rport, ndlp, rport->remoteport->port_id); + "6061 rport %p, DID x%06x node not ready.\n", + rport, rport->remoteport->port_id); ndlp = lpfc_findnode_did(vport, rport->remoteport->port_id); if (!ndlp) { -- 2.1.0