From: osandov@osandov.com (Omar Sandoval)
Subject: [PATCH 0/2] blktests: test ANA base support
Date: Wed, 25 Jul 2018 14:00:01 -0700 [thread overview]
Message-ID: <20180725210001.GB16847@vader> (raw)
In-Reply-To: <BYAPR04MB4502890F18B77778B8EF6E5686540@BYAPR04MB4502.namprd04.prod.outlook.com>
On Wed, Jul 25, 2018@07:27:35PM +0000, Chaitanya Kulkarni wrote:
>
> Thanks, Omar.
Tests nvme/014 and nvme/015 had a pretty bad typo that I didn't notice
last time:
dd=/dev/urandom of="/dev/${nvmedev}n1" count=128000 bs=4k
That should be
dd if=/dev/urandom of="/dev/${nvmedev}n1" count=128000 bs=4k status=none
When I fix that (and change the nvme flush call as mentioned before), I
sometimes get a hung task:
[ 273.844440] run blktests nvme/015 at 2018-07-25 13:44:11
[ 273.861950] nvmet: adding nsid 1 to subsystem blktests-subsystem-1
[ 273.875014] nvmet: creating controller 1 for subsystem blktests-subsystem-1 for NQN nqn.2014-08.org.nvmexpress:uuid:c5e36fdf-8e4d-4c27-be56-da373db583b2.
[ 273.877457] nvme nvme1: creating 4 I/O queues.
[ 273.879141] nvme nvme1: new ctrl: "blktests-subsystem-1"
[ 276.247708] nvme nvme1: using deprecated NVME_IOCTL_IO_CMD ioctl on the char device!
[ 276.262835] nvme nvme1: Removing ctrl: NQN "blktests-subsystem-1"
[ 289.755361] nvmet: ctrl 1 keep-alive timer (15 seconds) expired!
[ 289.760579] nvmet: ctrl 1 fatal error occurred!
[ 491.095890] INFO: task kworker/u8:0:7 blocked for more than 120 seconds.
[ 491.104407] Not tainted 4.18.0-rc6 #18
[ 491.108330] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 491.116521] kworker/u8:0 D 0 7 2 0x80000000
[ 491.121754] Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core]
[ 491.129604] Call Trace:
[ 491.131611] ? __schedule+0x2a1/0x890
[ 491.135112] ? _raw_spin_unlock_irqrestore+0x20/0x40
[ 491.140542] schedule+0x32/0x90
[ 491.142030] blk_mq_freeze_queue_wait+0x41/0xa0
[ 491.144186] ? wait_woken+0x80/0x80
[ 491.145726] blk_cleanup_queue+0x75/0x160
[ 491.150235] nvme_ns_remove+0xf9/0x130 [nvme_core]
[ 491.151910] nvme_remove_namespaces+0x86/0xc0 [nvme_core]
[ 491.153127] nvme_delete_ctrl_work+0x4b/0x80 [nvme_core]
[ 491.154727] process_one_work+0x18c/0x360
[ 491.155428] worker_thread+0x1c6/0x380
[ 491.156160] ? process_one_work+0x360/0x360
[ 491.157493] kthread+0x112/0x130
[ 491.159119] ? kthread_flush_work_fn+0x10/0x10
[ 491.160008] ret_from_fork+0x35/0x40
[ 491.160729] INFO: task nvme:1139 blocked for more than 120 seconds.
[ 491.162416] Not tainted 4.18.0-rc6 #18
[ 491.164348] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 491.166012] nvme D 0 1139 1072 0x00000000
[ 491.167946] Call Trace:
[ 491.168459] ? __schedule+0x2a1/0x890
[ 491.169312] schedule+0x32/0x90
[ 491.170180] schedule_timeout+0x311/0x4a0
[ 491.171921] ? kernfs_fop_release+0xa0/0xa0
[ 491.172884] wait_for_common+0x1a0/0x1d0
[ 491.173813] ? wake_up_q+0x70/0x70
[ 491.174410] flush_work+0x10e/0x1c0
[ 491.174991] ? flush_workqueue_prep_pwqs+0x130/0x130
[ 491.176113] nvme_delete_ctrl_sync+0x41/0x50 [nvme_core]
[ 491.177969] nvme_sysfs_delete+0x28/0x30 [nvme_core]
[ 491.178632] kernfs_fop_write+0x116/0x190
[ 491.179254] __vfs_write+0x36/0x190
[ 491.179812] vfs_write+0xa9/0x190
[ 491.180344] ksys_write+0x4f/0xb0
[ 491.181056] do_syscall_64+0x5b/0x170
[ 491.181583] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 491.182311] RIP: 0033:0x7fc04176b9d4
[ 491.182863] Code: Bad RIP value.
[ 491.183650] RSP: 002b:00007ffc33bd15a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 491.184622] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc04176b9d4
[ 491.185606] RDX: 0000000000000001 RSI: 000055884bd0810a RDI: 0000000000000004
[ 491.186719] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000000f
[ 491.187684] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 491.189045] R13: 00007ffc33bd2c20 R14: 00007ffc33bd15f0 R15: 0000000000000010
I pushed what I have to https://github.com/osandov/blktests/tree/nvmeof,
can you please take a look?
next prev parent reply other threads:[~2018-07-25 21:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-17 13:31 [PATCH 0/2] blktests: test ANA base support Hannes Reinecke
2018-07-17 13:31 ` [PATCH 1/2] blktests: enable ANA support Hannes Reinecke
2018-07-17 13:31 ` [PATCH 2/2] blktests: add test for ANA state transition Hannes Reinecke
2018-07-17 13:56 ` Johannes Thumshirn
2018-07-21 21:29 ` Chaitanya Kulkarni
2018-07-23 14:14 ` Hannes Reinecke
2018-07-21 21:23 ` [PATCH 0/2] blktests: test ANA base support Chaitanya Kulkarni
2018-07-25 19:17 ` Omar Sandoval
2018-07-25 19:27 ` Chaitanya Kulkarni
2018-07-25 21:00 ` Omar Sandoval [this message]
2018-07-26 2:01 ` Chaitanya Kulkarni
2018-07-26 16:35 ` James Smart
2018-07-26 21:31 ` Omar Sandoval
2018-07-26 22:26 ` Omar Sandoval
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180725210001.GB16847@vader \
--to=osandov@osandov.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).