From: hare@suse.de (Hannes Reinecke)
Subject: [PATCH 1/2] blktests: enable ANA support
Date: Thu, 2 Aug 2018 12:34:54 +0200 [thread overview]
Message-ID: <20180802103455.82148-2-hare@suse.de> (raw)
In-Reply-To: <20180802103455.82148-1-hare@suse.de>
Update functions to support ANA.
Signed-off-by: Hannes Reinecke <hare at suse.com>
---
tests/nvme/rc | 89 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 86 insertions(+), 3 deletions(-)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index fb5dbdf..ecbd9b9 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -27,7 +27,7 @@ group_device_requires() {
_test_dev_is_nvme
}
-NVMET_CFS="/sys/kernel/config/nvmet/"
+NVMET_CFS="/sys/kernel/config/nvmet"
_test_dev_is_nvme() {
if ! readlink -f "$TEST_DEV_SYSFS/device" | grep -q nvme; then
@@ -49,6 +49,7 @@ _create_nvmet_port() {
mkdir "${NVMET_CFS}/ports/${port}"
echo "${trtype}" > "${NVMET_CFS}/ports/${port}/addr_trtype"
+ echo "${port}" > "${NVMET_CFS}/ports/${port}/addr_traddr"
echo "${port}"
}
@@ -58,6 +59,62 @@ _remove_nvmet_port() {
rmdir "${NVMET_CFS}/ports/${port}"
}
+_create_nvmet_anagroup() {
+ local port="$1"
+ local port_cfs="${NVMET_CFS}/ports/${port}"
+ local grpid
+
+ for ((grpid = 1; ; grpid++)); do
+ if [[ ! -e "${port_cfs}/ana_groups/${grpid}" ]]; then
+ break
+ fi
+ done
+
+ mkdir "${port_cfs}/ana_groups/${grpid}"
+
+ echo "${grpid}"
+}
+
+_remove_nvmet_anagroup() {
+ local port="$1"
+ local grpid="$2"
+ local ana_cfs="${NVMET_CFS}/ports/${port}/ana_groups/${grpid}"
+
+ rmdir "${ana_cfs}"
+}
+
+_set_nvmet_anagroup_state() {
+ local port="$1"
+ local grpid="$2"
+ local state="$3"
+ local ana_cfs="${NVMET_CFS}/ports/${port}/ana_groups/${grpid}"
+
+ echo "${state}" > "${ana_cfs}/ana_state"
+}
+
+_display_ana_state() {
+ local nvmet_subsystem="$1"
+ local grpid state cntlid
+
+ for nvme in /sys/class/nvme/* ; do
+ [ -f ${nvme}/subsysnqn ] || continue
+ subsys="$(cat "${nvme}/subsysnqn")"
+ if [ "${subsys}" != "${nvmet_subsystem}" ] ; then
+ continue
+ fi
+ cntlid="$(cat "${nvme}/cntlid")"
+ for c in ${nvme}/nvme* ; do
+ if [ ! -d ${c} ] ; then
+ echo "${cntlid}: ANA disabled"
+ continue
+ fi
+ grpid="$(cat "${c}/ana_grpid")"
+ state="$(cat "${c}/ana_state")"
+ echo "${cntlid}: grpid ${grpid} state ${state}"
+ done
+ done
+}
+
_create_nvmet_ns() {
local nvmet_subsystem="$1"
local nsid="$2"
@@ -65,14 +122,22 @@ _create_nvmet_ns() {
local uuid="00000000-0000-0000-0000-000000000000"
local subsys_path="${NVMET_CFS}/subsystems/${nvmet_subsystem}"
local ns_path="${subsys_path}/namespaces/${nsid}"
+ local ana_grpid
- if [[ $# -eq 4 ]]; then
+ if [[ $# -ge 4 ]]; then
uuid="$4"
fi
+ if [[ $# -eq 5 ]]; then
+ ana_grpid="$5"
+ fi
+
mkdir "${ns_path}"
printf "%s" "${blkdev}" > "${ns_path}/device_path"
printf "%s" "${uuid}" > "${ns_path}/device_uuid"
+ if [ -n "${ana_grpid}" ] ; then
+ printf "%s" "${ana_grpid}" > "${ns_path}/ana_grpid"
+ fi
printf 1 > "${ns_path}/enable"
}
@@ -80,11 +145,12 @@ _create_nvmet_subsystem() {
local nvmet_subsystem="$1"
local blkdev="$2"
local uuid=$3
+ local ana_grpid=$4
local cfs_path="${NVMET_CFS}/subsystems/${nvmet_subsystem}"
mkdir -p "${cfs_path}"
echo 1 > "${cfs_path}/attr_allow_any_host"
- _create_nvmet_ns "${nvmet_subsystem}" "1" "${blkdev}" "${uuid}"
+ _create_nvmet_ns "${nvmet_subsystem}" "1" "${blkdev}" "${uuid}" "${ana_grpid}"
}
_remove_nvmet_ns() {
@@ -128,6 +194,23 @@ _find_nvme_loop_dev() {
transport="$(cat "/sys/class/nvme/${dev}/transport")"
if [[ "$transport" == "loop" ]]; then
echo "$dev"
+ break
+ fi
+ done
+}
+
+_find_nvme_ns() {
+ local uuid=$1
+ local dev
+ local hidden
+
+ for dev in /sys/block/nvme*; do
+ hidden="$(cat "${dev}/hidden")"
+ [[ "$hidden" -eq 1 ]] && continue
+ u="$(cat "${dev}/uuid")"
+ if [[ "$uuid" = "$u" ]] ; then
+ echo "$(basename "${dev}")"
+ break
fi
done
}
--
2.12.3
next prev parent reply other threads:[~2018-08-02 10:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-02 10:34 [PATCHv2 0/2] blktests: test ANA base support Hannes Reinecke
2018-08-02 10:34 ` Hannes Reinecke [this message]
2018-08-03 0:27 ` [PATCH 1/2] blktests: enable ANA support Chaitanya Kulkarni
2018-08-02 10:34 ` [PATCH 2/2] blktests: add test for ANA state transition Hannes Reinecke
2018-08-03 0:57 ` Chaitanya Kulkarni
2018-08-14 21:56 ` Omar Sandoval
2018-08-15 3:31 ` Chaitanya Kulkarni
-- strict thread matches above, loose matches on Subject: below --
2018-07-17 13:31 [PATCH 0/2] blktests: test ANA base support Hannes Reinecke
2018-07-17 13:31 ` [PATCH 1/2] blktests: enable ANA support Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180802103455.82148-2-hare@suse.de \
--to=hare@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).