From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
Klaus Jensen <k.jensen@samsung.com>,
Christoph Hellwig <hch@lst.de>,
linux-nvme@lists.infradead.org
Subject: [PATCH AUTOSEL 5.10 25/41] nvme-pci: allow use of cmb on v1.4 controllers
Date: Fri, 29 Jan 2021 10:36:56 -0500 [thread overview]
Message-ID: <20210129153713.1592185-25-sashal@kernel.org> (raw)
In-Reply-To: <20210129153713.1592185-1-sashal@kernel.org>
From: Klaus Jensen <k.jensen@samsung.com>
[ Upstream commit 20d3bb92e84d417b0494a3b6867f0c86713db257 ]
Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled
by the host.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[hch: avoid a local variable and add a comment]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/pci.c | 14 ++++++++++++++
include/linux/nvme.h | 6 ++++++
2 files changed, 20 insertions(+)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 77f615568194d..a3486c1c27f0c 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -23,6 +23,7 @@
#include <linux/t10-pi.h>
#include <linux/types.h>
#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
#include <linux/sed-opal.h>
#include <linux/pci-p2pdma.h>
@@ -1825,6 +1826,9 @@ static void nvme_map_cmb(struct nvme_dev *dev)
if (dev->cmb_size)
return;
+ if (NVME_CAP_CMBS(dev->ctrl.cap))
+ writel(NVME_CMBMSC_CRE, dev->bar + NVME_REG_CMBMSC);
+
dev->cmbsz = readl(dev->bar + NVME_REG_CMBSZ);
if (!dev->cmbsz)
return;
@@ -1838,6 +1842,16 @@ static void nvme_map_cmb(struct nvme_dev *dev)
if (offset > bar_size)
return;
+ /*
+ * Tell the controller about the host side address mapping the CMB,
+ * and enable CMB decoding for the NVMe 1.4+ scheme:
+ */
+ if (NVME_CAP_CMBS(dev->ctrl.cap)) {
+ hi_lo_writeq(NVME_CMBMSC_CRE | NVME_CMBMSC_CMSE |
+ (pci_bus_address(pdev, bar) + offset),
+ dev->bar + NVME_REG_CMBMSC);
+ }
+
/*
* Controllers may support a CMB size larger than their BAR,
* for example, due to being behind a bridge. Reduce the CMB to
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index d925359976873..bfed36e342ccb 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -116,6 +116,9 @@ enum {
NVME_REG_BPMBL = 0x0048, /* Boot Partition Memory Buffer
* Location
*/
+ NVME_REG_CMBMSC = 0x0050, /* Controller Memory Buffer Memory
+ * Space Control
+ */
NVME_REG_PMRCAP = 0x0e00, /* Persistent Memory Capabilities */
NVME_REG_PMRCTL = 0x0e04, /* Persistent Memory Region Control */
NVME_REG_PMRSTS = 0x0e08, /* Persistent Memory Region Status */
@@ -135,6 +138,7 @@ enum {
#define NVME_CAP_CSS(cap) (((cap) >> 37) & 0xff)
#define NVME_CAP_MPSMIN(cap) (((cap) >> 48) & 0xf)
#define NVME_CAP_MPSMAX(cap) (((cap) >> 52) & 0xf)
+#define NVME_CAP_CMBS(cap) (((cap) >> 57) & 0x1)
#define NVME_CMB_BIR(cmbloc) ((cmbloc) & 0x7)
#define NVME_CMB_OFST(cmbloc) (((cmbloc) >> 12) & 0xfffff)
@@ -192,6 +196,8 @@ enum {
NVME_CSTS_SHST_OCCUR = 1 << 2,
NVME_CSTS_SHST_CMPLT = 2 << 2,
NVME_CSTS_SHST_MASK = 3 << 2,
+ NVME_CMBMSC_CRE = 1 << 0,
+ NVME_CMBMSC_CMSE = 1 << 1,
};
struct nvme_id_power_state {
--
2.27.0
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
next prev parent reply other threads:[~2021-01-29 15:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210129153713.1592185-1-sashal@kernel.org>
2021-01-29 15:36 ` [PATCH AUTOSEL 5.10 22/41] nvme: check the PRINFO bit before deciding the host buffer length Sasha Levin
2021-01-29 15:36 ` [PATCH AUTOSEL 5.10 23/41] nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout Sasha Levin
2021-01-29 15:36 ` [PATCH AUTOSEL 5.10 24/41] nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout Sasha Levin
2021-01-29 15:36 ` Sasha Levin [this message]
2021-01-29 15:36 ` [PATCH AUTOSEL 5.10 26/41] nvmet: set right status on error in id-ns handler Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210129153713.1592185-25-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=hch@lst.de \
--cc=k.jensen@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox