linux-nvme.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mwilck@suse.com
To: Keith Busch <kbusch@kernel.org>, Sagi Grimberg <sagi@grimberg.me>,
	Christoph Hellwig <hch@lst.de>, Chao Leng <lengchao@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>, Daniel Wagner <dwagner@suse.de>,
	linux-nvme@lists.infradead.org, Martin Wilck <mwilck@suse.com>,
	stable@vger.kernel.org
Subject: [PATCH v3] nvme: rdma/tcp: fix list corruption with anatt timer
Date: Tue, 27 Apr 2021 10:52:46 +0200	[thread overview]
Message-ID: <20210427085246.13728-1-mwilck@suse.com> (raw)

From: Martin Wilck <mwilck@suse.com>

We have observed a few crashes run_timer_softirq(), where a broken
timer_list struct belonging to an anatt_timer was encountered. The broken
structures look like this, and we see actually multiple ones attached to
the same timer base:

crash> struct timer_list 0xffff92471bcfdc90
struct timer_list {
  entry = {
    next = 0xdead000000000122,  // LIST_POISON2
    pprev = 0x0
  },
  expires = 4296022933,
  function = 0xffffffffc06de5e0 <nvme_anatt_timeout>,
  flags = 20
}

If such a timer is encountered in run_timer_softirq(), the kernel
crashes. The test scenario was an I/O load test with lots of NVMe
controllers, some of which were removed and re-added on the storage side.

I think this may happen if the rdma recovery_work starts, in this call
chain:

nvme_rdma_error_recovery_work()
  /* this stops all sorts of activity for the controller, but not
     the multipath-related work queue and timer */
  nvme_rdma_reconnect_or_remove(ctrl)
    => kicks reconnect_work

work queue: reconnect_work

nvme_rdma_reconnect_ctrl_work()
  nvme_rdma_setup_ctrl()
    nvme_rdma_configure_admin_queue()
       nvme_init_identify()
          nvme_mpath_init()
	     # this sets some fields of the timer_list without taking a lock
             timer_setup()
             nvme_read_ana_log()
	         mod_timer() or del_timer_sync()

Similar for TCP. The idea for the patch is based on the observation that
nvme_rdma_reset_ctrl_work() calls nvme_stop_ctrl()->nvme_mpath_stop(),
whereas nvme_rdma_error_recovery_work() stops only the keepalive timer, but
not the anatt timer.

I admit that the root cause analysis isn't rock solid yet. In particular, I
can't explain why we see LIST_POISON2 in the "next" pointer, which would
indicate that the timer has been detached before; yet we find it linked to
the timer base when the crash occurs.

OTOH, the anatt_timer is only touched in nvme_mpath_init() (see above) and
nvme_mpath_stop(), so the hypothesis that modifying active timers may cause
the issue isn't totally out of sight. I suspect that the LIST_POISON2 may
come to pass in multiple steps.

If anyone has better ideas, please advise. The issue occurs very
sporadically; verifying this by testing will be difficult.

Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Cc: stable@vger.kernel.org

----
Changes in v3: Changed the subject line, as suggested by Sagi Grimberg

Changes in v2: Moved call to nvme_mpath_stop() further down, directly before
the call of nvme_rdma_reconnect_or_remove() (Chao Leng)
---
 drivers/nvme/host/multipath.c | 1 +
 drivers/nvme/host/rdma.c      | 1 +
 drivers/nvme/host/tcp.c       | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index a1d476e1ac02..c63dd5dfa7ff 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -586,6 +586,7 @@ void nvme_mpath_stop(struct nvme_ctrl *ctrl)
 	del_timer_sync(&ctrl->anatt_timer);
 	cancel_work_sync(&ctrl->ana_work);
 }
+EXPORT_SYMBOL_GPL(nvme_mpath_stop);
 
 #define SUBSYS_ATTR_RW(_name, _mode, _show, _store)  \
 	struct device_attribute subsys_attr_##_name =	\
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index be905d4fdb47..fc07a7b0dc1d 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1202,6 +1202,7 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work)
 		return;
 	}
 
+	nvme_mpath_stop(&ctrl->ctrl);
 	nvme_rdma_reconnect_or_remove(ctrl);
 }
 
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index a0f00cb8f9f3..46287b4f4d10 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -2068,6 +2068,7 @@ static void nvme_tcp_error_recovery_work(struct work_struct *work)
 		return;
 	}
 
+	nvme_mpath_stop(ctrl);
 	nvme_tcp_reconnect_or_remove(ctrl);
 }
 
-- 
2.31.1


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

             reply	other threads:[~2021-04-27  8:57 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-27  8:52 mwilck [this message]
2021-04-27  9:16 ` [PATCH v3] nvme: rdma/tcp: fix list corruption with anatt timer Daniel Wagner
2021-04-27  9:33 ` Hannes Reinecke
2021-04-27 16:25   ` Christoph Hellwig
2021-04-27 18:05     ` Hannes Reinecke
2021-04-27 18:10       ` Christoph Hellwig
2021-04-27 19:54       ` Martin Wilck
2021-04-28  6:35         ` Hannes Reinecke
2021-04-28  6:41           ` Martin Wilck
2021-04-28  6:39         ` Maurizio Lombardi
2021-04-28  7:06           ` Martin Wilck
2021-04-28  7:21             ` Maurizio Lombardi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210427085246.13728-1-mwilck@suse.com \
    --to=mwilck@suse.com \
    --cc=dwagner@suse.de \
    --cc=hare@suse.de \
    --cc=hch@lst.de \
    --cc=kbusch@kernel.org \
    --cc=lengchao@huawei.com \
    --cc=linux-nvme@lists.infradead.org \
    --cc=sagi@grimberg.me \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).