public inbox for linux-nvme@lists.infradead.org
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>,
	Keith Busch <keith.busch@wdc.com>,
	linux-nvme@lists.infradead.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH] nvme: add 'iopolicy' module parameter
Date: Mon, 17 May 2021 10:13:48 +0200	[thread overview]
Message-ID: <20210517081348.90645-1-hare@suse.de> (raw)

While the 'iopolicy' sysfs attribute can be set at runtime, most
storage arrays prefer to use the 'round-robin' iopolicy to be
used. So to avoid having to code a large udev rule detailing
every single storage array add a module parameter 'iopolicy'
to allow the admin to switch the default.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/nvme/host/core.c      |  4 +---
 drivers/nvme/host/multipath.c | 10 ++++++++++
 drivers/nvme/host/nvme.h      |  4 ++++
 3 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 6a5386267c10..37740e11eef3 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2608,9 +2608,7 @@ static int nvme_init_subsystem(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
 	subsys->vendor_id = le16_to_cpu(id->vid);
 	subsys->cmic = id->cmic;
 	subsys->awupf = le16_to_cpu(id->awupf);
-#ifdef CONFIG_NVME_MULTIPATH
-	subsys->iopolicy = NVME_IOPOLICY_NUMA;
-#endif
+	nvme_mpath_default_iopolicy(subsys);
 
 	subsys->dev.class = nvme_subsys_class;
 	subsys->dev.release = nvme_release_subsystem;
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index ecc99bd5f8ad..9a67ac8347c3 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -13,6 +13,16 @@ module_param(multipath, bool, 0444);
 MODULE_PARM_DESC(multipath,
 	"turn on native support for multiple controllers per subsystem");
 
+static int iopolicy = NVME_IOPOLICY_NUMA;
+module_param(iopolicy, int, 0444);
+MODULE_PARM_DESC(iopolicy,
+	"Default multipath I/O policy; 0 - NUMA (default), 1 - Round-robin");
+
+void nvme_mpath_default_iopolicy(struct nvme_subsystem *subsys)
+{
+	subsys->iopolicy = iopolicy;
+}
+
 void nvme_mpath_unfreeze(struct nvme_subsystem *subsys)
 {
 	struct nvme_ns_head *h;
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 05f31a2c64bb..0ff7f9d3373f 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -706,6 +706,7 @@ static inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
 void nvme_mpath_unfreeze(struct nvme_subsystem *subsys);
 void nvme_mpath_wait_freeze(struct nvme_subsystem *subsys);
 void nvme_mpath_start_freeze(struct nvme_subsystem *subsys);
+void nvme_mpath_default_iopolicy(struct nvme_subsystem *subsys);
 bool nvme_mpath_set_disk_name(struct nvme_ns *ns, char *disk_name, int *flags);
 void nvme_failover_req(struct request *req);
 void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl);
@@ -803,6 +804,9 @@ static inline void nvme_mpath_wait_freeze(struct nvme_subsystem *subsys)
 static inline void nvme_mpath_start_freeze(struct nvme_subsystem *subsys)
 {
 }
+static inline void nvme_mpath_default_iopolicy(struct nvme_subsystem *subsys)
+{
+}
 #endif /* CONFIG_NVME_MULTIPATH */
 
 int nvme_revalidate_zones(struct nvme_ns *ns);
-- 
2.29.2


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

             reply	other threads:[~2021-05-17  8:27 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-17  8:13 Hannes Reinecke [this message]
  -- strict thread matches above, loose matches on Subject: below --
2021-12-10 13:14 [PATCH] nvme: add 'iopolicy' module parameter Hannes Reinecke
2021-12-12  9:31 ` Sagi Grimberg
2021-12-13  7:11 ` Chaitanya Kulkarni
2021-12-16  8:38 ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210517081348.90645-1-hare@suse.de \
    --to=hare@suse.de \
    --cc=hch@lst.de \
    --cc=keith.busch@wdc.com \
    --cc=linux-nvme@lists.infradead.org \
    --cc=sagi@grimberg.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox