From: Christoph Hellwig <hch@lst.de>
To: Jens Axboe <axboe@kernel.dk>, Keith Busch <kbusch@kernel.org>,
Sagi Grimberg <sagi@grimberg.me>, Chao Leng <lengchao@huawei.com>
Cc: Ming Lei <ming.lei@redhat.com>,
linux-nvme@lists.infradead.org, linux-block@vger.kernel.org
Subject: [PATCH 6/8] nvme: move the NS_DEAD flag to the controller
Date: Thu, 20 Oct 2022 12:56:06 +0200 [thread overview]
Message-ID: <20221020105608.1581940-7-hch@lst.de> (raw)
In-Reply-To: <20221020105608.1581940-1-hch@lst.de>
The NVME_NS_DEAD flag is only set in nvme_set_queue_dying, which is
called in a loop over all namespaces in nvme_kill_queues. Switch it
to a controller flag checked and set outside said loop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/nvme/host/core.c | 16 +++++++---------
drivers/nvme/host/nvme.h | 2 +-
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index a74212a4f1a5f..fa7fdb744979c 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -4330,7 +4330,7 @@ static void nvme_validate_ns(struct nvme_ns *ns, struct nvme_ns_info *info)
{
int ret = NVME_SC_INVALID_NS | NVME_SC_DNR;
- if (test_bit(NVME_NS_DEAD, &ns->flags))
+ if (test_bit(NVME_CTRL_NS_DEAD, &ns->ctrl->flags))
goto out;
ret = NVME_SC_INVALID_NS | NVME_SC_DNR;
@@ -4404,7 +4404,8 @@ static void nvme_remove_invalid_namespaces(struct nvme_ctrl *ctrl,
down_write(&ctrl->namespaces_rwsem);
list_for_each_entry_safe(ns, next, &ctrl->namespaces, list) {
- if (ns->head->ns_id > nsid || test_bit(NVME_NS_DEAD, &ns->flags))
+ if (ns->head->ns_id > nsid ||
+ test_bit(NVME_CTRL_NS_DEAD, &ns->ctrl->flags))
list_move_tail(&ns->list, &rm_list);
}
up_write(&ctrl->namespaces_rwsem);
@@ -5110,9 +5111,6 @@ static void nvme_stop_ns_queue(struct nvme_ns *ns)
*/
static void nvme_set_queue_dying(struct nvme_ns *ns)
{
- if (test_and_set_bit(NVME_NS_DEAD, &ns->flags))
- return;
-
blk_mark_disk_dead(ns->disk);
nvme_start_ns_queue(ns);
}
@@ -5129,14 +5127,14 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl)
struct nvme_ns *ns;
down_read(&ctrl->namespaces_rwsem);
-
/* Forcibly unquiesce queues to avoid blocking dispatch */
if (ctrl->admin_q && !blk_queue_dying(ctrl->admin_q))
nvme_start_admin_queue(ctrl);
- list_for_each_entry(ns, &ctrl->namespaces, list)
- nvme_set_queue_dying(ns);
-
+ if (!test_and_set_bit(NVME_CTRL_NS_DEAD, &ctrl->flags)) {
+ list_for_each_entry(ns, &ctrl->namespaces, list)
+ nvme_set_queue_dying(ns);
+ }
up_read(&ctrl->namespaces_rwsem);
}
EXPORT_SYMBOL_GPL(nvme_kill_queues);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index a29877217ee65..82989a3322130 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -237,6 +237,7 @@ enum nvme_ctrl_flags {
NVME_CTRL_FAILFAST_EXPIRED = 0,
NVME_CTRL_ADMIN_Q_STOPPED = 1,
NVME_CTRL_STARTED_ONCE = 2,
+ NVME_CTRL_NS_DEAD = 3,
};
struct nvme_ctrl {
@@ -483,7 +484,6 @@ struct nvme_ns {
unsigned long features;
unsigned long flags;
#define NVME_NS_REMOVING 0
-#define NVME_NS_DEAD 1
#define NVME_NS_ANA_PENDING 2
#define NVME_NS_FORCE_RO 3
#define NVME_NS_READY 4
--
2.30.2
next prev parent reply other threads:[~2022-10-20 12:01 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-20 10:56 per-tagset SRCU struct and quiesce Christoph Hellwig
2022-10-20 10:56 ` [PATCH 1/8] block: set the disk capacity to 0 in blk_mark_disk_dead Christoph Hellwig
2022-10-20 13:16 ` Sagi Grimberg
2022-10-21 1:09 ` Ming Lei
2022-10-21 13:11 ` Christoph Hellwig
2022-10-21 1:53 ` Chao Leng
2022-10-21 6:49 ` Hannes Reinecke
2022-10-21 13:13 ` Christoph Hellwig
2022-10-21 21:12 ` Bart Van Assche
2022-10-20 10:56 ` [PATCH 2/8] blk-mq: skip non-mq queues in blk_mq_quiesce_queue Christoph Hellwig
2022-10-20 13:16 ` Sagi Grimberg
2022-10-21 1:13 ` Ming Lei
2022-10-21 13:19 ` Christoph Hellwig
2022-10-21 15:08 ` Ming Lei
2022-10-21 2:47 ` Chao Leng
2022-10-21 3:16 ` Chao Leng
2022-10-21 6:49 ` Hannes Reinecke
2022-10-20 10:56 ` [PATCH 3/8] blk-mq: move the srcu_struct used for quiescing to the tagset Christoph Hellwig
2022-10-20 13:23 ` Sagi Grimberg
2022-10-20 17:26 ` Keith Busch
2022-10-21 13:20 ` Christoph Hellwig
2022-10-21 1:41 ` Ming Lei
2022-10-21 2:49 ` Chao Leng
2022-10-21 6:50 ` Hannes Reinecke
2022-10-21 7:16 ` Chao Leng
2022-10-21 13:22 ` Christoph Hellwig
2022-10-20 10:56 ` [PATCH 4/8] blk-mq: pass a tagset to blk_mq_wait_quiesce_done Christoph Hellwig
2022-10-20 13:23 ` Sagi Grimberg
2022-10-21 1:46 ` Ming Lei
2022-10-21 13:23 ` Christoph Hellwig
2022-10-21 2:49 ` Chao Leng
2022-10-21 6:50 ` Hannes Reinecke
2022-10-21 21:18 ` Bart Van Assche
2022-10-20 10:56 ` [PATCH 5/8] blk-mq: add tagset quiesce interface Christoph Hellwig
2022-10-20 13:24 ` Sagi Grimberg
2022-10-21 1:53 ` Ming Lei
2022-10-21 2:49 ` Chao Leng
2022-10-21 6:51 ` Hannes Reinecke
2022-10-21 21:22 ` Bart Van Assche
2022-10-24 1:57 ` Chao Leng
2022-10-24 13:35 ` Bart Van Assche
2022-10-25 1:38 ` Chao Leng
2022-10-20 10:56 ` Christoph Hellwig [this message]
2022-10-20 13:30 ` [PATCH 6/8] nvme: move the NS_DEAD flag to the controller Sagi Grimberg
2022-10-21 13:28 ` Christoph Hellwig
2022-10-24 8:43 ` Sagi Grimberg
2022-10-24 8:50 ` Sagi Grimberg
2022-10-21 2:49 ` Chao Leng
2022-10-21 6:51 ` Hannes Reinecke
2022-10-20 10:56 ` [PATCH 7/8] nvme: remove nvme_set_queue_dying Christoph Hellwig
2022-10-20 13:10 ` Sagi Grimberg
2022-10-21 13:29 ` Christoph Hellwig
2022-10-24 8:48 ` Sagi Grimberg
2022-10-21 2:50 ` Chao Leng
2022-10-21 6:52 ` Hannes Reinecke
2022-10-20 10:56 ` [PATCH 8/8] nvme: use blk_mq_[un]quiesce_tagset Christoph Hellwig
2022-10-20 13:35 ` Sagi Grimberg
2022-10-21 2:50 ` Chao Leng
2022-10-21 6:52 ` Hannes Reinecke
2022-10-20 13:16 ` per-tagset SRCU struct and quiesce Sagi Grimberg
2022-10-21 18:06 ` Keith Busch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221020105608.1581940-7-hch@lst.de \
--to=hch@lst.de \
--cc=axboe@kernel.dk \
--cc=kbusch@kernel.org \
--cc=lengchao@huawei.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=ming.lei@redhat.com \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox