public inbox for linux-nvme@lists.infradead.org
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Jens Axboe <axboe@kernel.dk>, Keith Busch <kbusch@kernel.org>,
	Sagi Grimberg <sagi@grimberg.me>, Chao Leng <lengchao@huawei.com>
Cc: Ming Lei <ming.lei@redhat.com>,
	linux-nvme@lists.infradead.org, linux-block@vger.kernel.org,
	Hannes Reinecke <hare@suse.de>
Subject: [PATCH 13/14] blk-mq: add tagset quiesce interface
Date: Tue,  1 Nov 2022 16:00:49 +0100	[thread overview]
Message-ID: <20221101150050.3510-14-hch@lst.de> (raw)
In-Reply-To: <20221101150050.3510-1-hch@lst.de>

From: Chao Leng <lengchao@huawei.com>

Drivers that have shared tagsets may need to quiesce potentially a lot
of request queues that all share a single tagset (e.g. nvme). Add an
interface to quiesce all the queues on a given tagset. This interface is
useful because it can speedup the quiesce by doing it in parallel.

Because some queues should not need to be quiesced (e.g. the nvme
connect_q) when quiescing the tagset, introduce a
QUEUE_FLAG_SKIP_TAGSET_QUIESCE flag to allow this new interface to
ski quiescing a particular queue.

Signed-off-by: Chao Leng <lengchao@huawei.com>
[hch: simplify for the per-tag_set srcu_struct]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 block/blk-mq.c         | 27 +++++++++++++++++++++++++++
 include/linux/blk-mq.h |  2 ++
 include/linux/blkdev.h |  3 +++
 3 files changed, 32 insertions(+)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index b358328a1dce3..f0dd07bbf4c16 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -315,6 +315,33 @@ void blk_mq_unquiesce_queue(struct request_queue *q)
 }
 EXPORT_SYMBOL_GPL(blk_mq_unquiesce_queue);
 
+void blk_mq_quiesce_tagset(struct blk_mq_tag_set *set)
+{
+	struct request_queue *q;
+
+	mutex_lock(&set->tag_list_lock);
+	list_for_each_entry(q, &set->tag_list, tag_set_list) {
+		if (!blk_queue_skip_tagset_quiesce(q))
+			blk_mq_quiesce_queue_nowait(q);
+	}
+	blk_mq_wait_quiesce_done(set);
+	mutex_unlock(&set->tag_list_lock);
+}
+EXPORT_SYMBOL_GPL(blk_mq_quiesce_tagset);
+
+void blk_mq_unquiesce_tagset(struct blk_mq_tag_set *set)
+{
+	struct request_queue *q;
+
+	mutex_lock(&set->tag_list_lock);
+	list_for_each_entry(q, &set->tag_list, tag_set_list) {
+		if (!blk_queue_skip_tagset_quiesce(q))
+			blk_mq_unquiesce_queue(q);
+	}
+	mutex_unlock(&set->tag_list_lock);
+}
+EXPORT_SYMBOL_GPL(blk_mq_unquiesce_tagset);
+
 void blk_mq_wake_waiters(struct request_queue *q)
 {
 	struct blk_mq_hw_ctx *hctx;
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index 061ea6e7af017..109a0e30c4704 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -881,6 +881,8 @@ void blk_mq_start_stopped_hw_queue(struct blk_mq_hw_ctx *hctx, bool async);
 void blk_mq_start_stopped_hw_queues(struct request_queue *q, bool async);
 void blk_mq_quiesce_queue(struct request_queue *q);
 void blk_mq_wait_quiesce_done(struct blk_mq_tag_set *set);
+void blk_mq_quiesce_tagset(struct blk_mq_tag_set *set);
+void blk_mq_unquiesce_tagset(struct blk_mq_tag_set *set);
 void blk_mq_unquiesce_queue(struct request_queue *q);
 void blk_mq_delay_run_hw_queue(struct blk_mq_hw_ctx *hctx, unsigned long msecs);
 void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6a6fa167fc828..9188aa3f62595 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -571,6 +571,7 @@ struct request_queue {
 #define QUEUE_FLAG_HCTX_ACTIVE	28	/* at least one blk-mq hctx is active */
 #define QUEUE_FLAG_NOWAIT       29	/* device supports NOWAIT */
 #define QUEUE_FLAG_SQ_SCHED     30	/* single queue style io dispatch */
+#define QUEUE_FLAG_SKIP_TAGSET_QUIESCE	31 /* quiesce_tagset skip the queue*/
 
 #define QUEUE_FLAG_MQ_DEFAULT	((1UL << QUEUE_FLAG_IO_STAT) |		\
 				 (1UL << QUEUE_FLAG_SAME_COMP) |	\
@@ -610,6 +611,8 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
 #define blk_queue_pm_only(q)	atomic_read(&(q)->pm_only)
 #define blk_queue_registered(q)	test_bit(QUEUE_FLAG_REGISTERED, &(q)->queue_flags)
 #define blk_queue_sq_sched(q)	test_bit(QUEUE_FLAG_SQ_SCHED, &(q)->queue_flags)
+#define blk_queue_skip_tagset_quiesce(q) \
+	test_bit(QUEUE_FLAG_SKIP_TAGSET_QUIESCE, &(q)->queue_flags)
 
 extern void blk_set_pm_only(struct request_queue *q);
 extern void blk_clear_pm_only(struct request_queue *q);
-- 
2.30.2



  parent reply	other threads:[~2022-11-01 15:02 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-01 15:00 per-tagset SRCU struct and quiesce v3 Christoph Hellwig
2022-11-01 15:00 ` [PATCH 01/14] block: set the disk capacity to 0 in blk_mark_disk_dead Christoph Hellwig
2022-11-02  1:18   ` Chaitanya Kulkarni
2022-11-02 14:35   ` Jens Axboe
2022-11-01 15:00 ` [PATCH 02/14] nvme-pci: refactor the tagset handling in nvme_reset_work Christoph Hellwig
2022-11-02  1:19   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 03/14] nvme: don't remove namespaces in nvme_passthru_end Christoph Hellwig
2022-11-02  1:20   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 04/14] nvme: remove the NVME_NS_DEAD check in nvme_remove_invalid_namespaces Christoph Hellwig
2022-11-02  1:21   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 05/14] nvme: remove the NVME_NS_DEAD check in nvme_validate_ns Christoph Hellwig
2022-11-02  1:21   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 06/14] nvme: don't unquiesce the admin queue in nvme_kill_queues Christoph Hellwig
2022-11-02  1:24   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 07/14] nvme: split nvme_kill_queues Christoph Hellwig
2022-11-02  1:25   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 08/14] nvme-pci: don't unquiesce the I/O queues in nvme_remove_dead_ctrl Christoph Hellwig
2022-11-02  1:26   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 09/14] nvme-apple: don't unquiesce the I/O queues in apple_nvme_reset_work Christoph Hellwig
2022-11-02  5:47   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 10/14] blk-mq: skip non-mq queues in blk_mq_quiesce_queue Christoph Hellwig
2022-11-02  5:47   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 11/14] blk-mq: move the srcu_struct used for quiescing to the tagset Christoph Hellwig
2022-11-02  5:49   ` Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 12/14] blk-mq: pass a tagset to blk_mq_wait_quiesce_done Christoph Hellwig
2022-11-02  5:50   ` Chaitanya Kulkarni
2022-11-01 15:00 ` Christoph Hellwig [this message]
2022-11-02  5:51   ` [PATCH 13/14] blk-mq: add tagset quiesce interface Chaitanya Kulkarni
2022-11-01 15:00 ` [PATCH 14/14] nvme: use blk_mq_[un]quiesce_tagset Christoph Hellwig
2022-11-02  5:51   ` Chaitanya Kulkarni
2022-11-21 20:44   ` Shakeel Butt
2022-11-22  2:53     ` Chao Leng
2022-11-22  6:08       ` Christoph Hellwig
2022-11-22  9:44         ` Sagi Grimberg
2022-11-22 16:40         ` Shakeel Butt
2022-11-01 15:25 ` per-tagset SRCU struct and quiesce v3 Keith Busch
2022-11-02  1:21 ` Chao Leng
2022-11-02  6:49 ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221101150050.3510-14-hch@lst.de \
    --to=hch@lst.de \
    --cc=axboe@kernel.dk \
    --cc=hare@suse.de \
    --cc=kbusch@kernel.org \
    --cc=lengchao@huawei.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=ming.lei@redhat.com \
    --cc=sagi@grimberg.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox