public inbox for linux-nvme@lists.infradead.org
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Keith Busch <kbusch@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>,
	Chaitanya Kulkarni <kch@nvidia.com>,
	Gerd Bayer <gbayer@linux.ibm.com>,
	asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-nvme@lists.infradead.org
Subject: [PATCH 08/12] nvme-pci: set constant paramters in nvme_pci_alloc_ctrl
Date: Tue,  8 Nov 2022 16:02:48 +0100	[thread overview]
Message-ID: <20221108150252.2123727-9-hch@lst.de> (raw)
In-Reply-To: <20221108150252.2123727-1-hch@lst.de>

Move setting of low-level constant parameters from nvme_reset_work to
nvme_pci_alloc_ctrl.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/nvme/host/pci.c | 38 +++++++++++++++++---------------------
 1 file changed, 17 insertions(+), 21 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index e1f60b1c6918f..87f7c8f5699ec 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2841,21 +2841,6 @@ static void nvme_reset_work(struct work_struct *work)
 		nvme_start_admin_queue(&dev->ctrl);
 	}
 
-	dma_set_min_align_mask(dev->dev, NVME_CTRL_PAGE_SIZE - 1);
-
-	/*
-	 * Limit the max command size to prevent iod->sg allocations going
-	 * over a single page.
-	 */
-	dev->ctrl.max_hw_sectors = min_t(u32,
-		NVME_MAX_KB_SZ << 1, dma_max_mapping_size(dev->dev) >> 9);
-	dev->ctrl.max_segments = NVME_MAX_SEGS;
-
-	/*
-	 * Don't limit the IOMMU merged segment size.
-	 */
-	dma_set_max_seg_size(dev->dev, 0xffffffff);
-
 	mutex_unlock(&dev->shutdown_lock);
 
 	/*
@@ -2869,12 +2854,6 @@ static void nvme_reset_work(struct work_struct *work)
 		goto out;
 	}
 
-	/*
-	 * We do not support an SGL for metadata (yet), so we are limited to a
-	 * single integrity segment for the separate metadata pointer.
-	 */
-	dev->ctrl.max_integrity_segments = 1;
-
 	result = nvme_init_ctrl_finish(&dev->ctrl, was_suspend);
 	if (result)
 		goto out;
@@ -3133,6 +3112,23 @@ static struct nvme_dev *nvme_pci_alloc_ctrl(struct pci_dev *pdev,
 			     quirks);
 	if (ret)
 		goto out_put_device;
+	
+	dma_set_min_align_mask(&pdev->dev, NVME_CTRL_PAGE_SIZE - 1);
+	dma_set_max_seg_size(&pdev->dev, 0xffffffff);
+
+	/*
+	 * Limit the max command size to prevent iod->sg allocations going
+	 * over a single page.
+	 */
+	dev->ctrl.max_hw_sectors = min_t(u32,
+		NVME_MAX_KB_SZ << 1, dma_max_mapping_size(&pdev->dev) >> 9);
+	dev->ctrl.max_segments = NVME_MAX_SEGS;
+
+	/*
+	 * There is no support for SGLs for metadata (yet), so we are limited to
+	 * a single integrity segment for the separate metadata pointer.
+	 */
+	dev->ctrl.max_integrity_segments = 1;
 	return dev;
 
 out_put_device:
-- 
2.30.2



  parent reply	other threads:[~2022-11-08 15:06 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-08 15:02 RFC: nvme-pci: split the probe and reset handlers Christoph Hellwig
2022-11-08 15:02 ` [PATCH 01/12] nvme-pci: don't call nvme_init_ctrl_finish from nvme_passthru_end Christoph Hellwig
2022-11-09  2:55   ` Sagi Grimberg
2022-11-09  6:26     ` Christoph Hellwig
2022-11-08 15:02 ` [PATCH 02/12] nvme: move OPAL setup from PCIe to core Christoph Hellwig
2022-11-09  2:55   ` Sagi Grimberg
2022-11-09 20:44   ` Keith Busch
2022-11-09 23:22     ` Chaitanya Kulkarni
2022-11-13 16:15       ` Christoph Hellwig
2022-11-08 15:02 ` [PATCH 03/12] nvme: simplify transport specific device attribute handling Christoph Hellwig
2022-11-09  2:57   ` Sagi Grimberg
2022-11-08 15:02 ` [PATCH 04/12] nvme-pci: put the admin queue in nvme_dev_remove_admin Christoph Hellwig
2022-11-09  2:58   ` Sagi Grimberg
2022-11-09  6:28     ` Christoph Hellwig
2022-11-08 15:02 ` [PATCH 05/12] nvme-pci: move more teardown work to nvme_remove Christoph Hellwig
2022-11-09  3:00   ` Sagi Grimberg
2022-11-08 15:02 ` [PATCH 06/12] nvme-pci: factor the iod mempool creation into a helper Christoph Hellwig
2022-11-09  3:00   ` Sagi Grimberg
2022-11-08 15:02 ` [PATCH 07/12] nvme-pci: factor out a nvme_pci_alloc_ctrl helper Christoph Hellwig
2022-11-09  3:03   ` Sagi Grimberg
2022-11-09  6:28     ` Christoph Hellwig
2022-11-08 15:02 ` Christoph Hellwig [this message]
2022-11-09  3:03   ` [PATCH 08/12] nvme-pci: set constant paramters in nvme_pci_alloc_ctrl Sagi Grimberg
2022-11-08 15:02 ` [PATCH 09/12] nvme-pci: call nvme_pci_configure_admin_queue from nvme_pci_enable Christoph Hellwig
2022-11-09  3:04   ` Sagi Grimberg
2022-11-08 15:02 ` [PATCH 10/12] nvme-pci: split nvme_dbbuf_dma_alloc Christoph Hellwig
2022-11-09  3:05   ` Sagi Grimberg
2022-11-08 15:02 ` [PATCH 11/12] nvme-pci: split the initial probe from the rest path Christoph Hellwig
2022-11-09  3:14   ` Sagi Grimberg
2022-11-09  6:31     ` Christoph Hellwig
2022-11-09 17:00       ` Keith Busch
2022-11-09 15:18   ` Gerd Bayer
2022-11-09 15:51   ` Keith Busch
2022-11-09 15:56   ` Keith Busch
2022-11-10  3:17   ` Chao Leng
2022-11-13 16:19     ` Christoph Hellwig
2022-11-08 15:02 ` [PATCH 12/12] nvme-pci: don't unbind the driver on reset failure Christoph Hellwig
2022-11-09  3:15   ` Sagi Grimberg
2022-11-09 17:10   ` Keith Busch
2022-11-09 17:12 ` RFC: nvme-pci: split the probe and reset handlers Keith Busch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221108150252.2123727-9-hch@lst.de \
    --to=hch@lst.de \
    --cc=asahi@lists.linux.dev \
    --cc=gbayer@linux.ibm.com \
    --cc=kbusch@kernel.org \
    --cc=kch@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=sagi@grimberg.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox