From: Christoph Hellwig <hch@lst.de>
To: Keith Busch <kbusch@kernel.org>, Sagi Grimberg <sagi@grimberg.me>
Cc: James Smart <james.smart@broadcom.com>,
Chaitanya Kulkarni <kch@nvidia.com>,
Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
asahi@lists.linux.dev, linux-nvme@lists.infradead.org
Subject: [PATCH 2/9] nvme: use nvme_wait_ready in nvme_shutdown_ctrl
Date: Tue, 29 Nov 2022 14:22:01 +0100 [thread overview]
Message-ID: <20221129132208.4337-3-hch@lst.de> (raw)
In-Reply-To: <20221129132208.4337-1-hch@lst.de>
Refactor the code to wait for CSTS state changes so that it can be reused
by nvme_shutdown_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/nvme/host/core.c | 36 +++++++++++-------------------------
1 file changed, 11 insertions(+), 25 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 02cc8dfc9f0b59..9f20af2406dcc8 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2260,16 +2260,17 @@ static const struct block_device_operations nvme_bdev_ops = {
.pr_ops = &nvme_pr_ops,
};
-static int nvme_wait_ready(struct nvme_ctrl *ctrl, u32 timeout, bool enabled)
+static int nvme_wait_ready(struct nvme_ctrl *ctrl, u32 mask, u32 val,
+ u32 timeout, const char *op)
{
unsigned long timeout_jiffies = ((timeout + 1) * HZ / 2) + jiffies;
- u32 csts, bit = enabled ? NVME_CSTS_RDY : 0;
+ u32 csts;
int ret;
while ((ret = ctrl->ops->reg_read32(ctrl, NVME_REG_CSTS, &csts)) == 0) {
if (csts == ~0)
return -ENODEV;
- if ((csts & NVME_CSTS_RDY) == bit)
+ if ((csts & mask) == val)
break;
usleep_range(1000, 2000);
@@ -2278,7 +2279,7 @@ static int nvme_wait_ready(struct nvme_ctrl *ctrl, u32 timeout, bool enabled)
if (time_after(jiffies, timeout_jiffies)) {
dev_err(ctrl->device,
"Device not ready; aborting %s, CSTS=0x%x\n",
- enabled ? "initialisation" : "reset", csts);
+ op, csts);
return -ENODEV;
}
}
@@ -2305,8 +2306,8 @@ int nvme_disable_ctrl(struct nvme_ctrl *ctrl)
if (ctrl->quirks & NVME_QUIRK_DELAY_BEFORE_CHK_RDY)
msleep(NVME_QUIRK_DELAY_AMOUNT);
-
- return nvme_wait_ready(ctrl, NVME_CAP_TIMEOUT(ctrl->cap), false);
+ return nvme_wait_ready(ctrl, NVME_CSTS_RDY, 0,
+ NVME_CAP_TIMEOUT(ctrl->cap), "reset");
}
EXPORT_SYMBOL_GPL(nvme_disable_ctrl);
@@ -2371,14 +2372,13 @@ int nvme_enable_ctrl(struct nvme_ctrl *ctrl)
ret = ctrl->ops->reg_write32(ctrl, NVME_REG_CC, ctrl->ctrl_config);
if (ret)
return ret;
- return nvme_wait_ready(ctrl, timeout, true);
+ return nvme_wait_ready(ctrl, NVME_CSTS_RDY, NVME_CSTS_RDY, timeout,
+ "initialisation");
}
EXPORT_SYMBOL_GPL(nvme_enable_ctrl);
int nvme_shutdown_ctrl(struct nvme_ctrl *ctrl)
{
- unsigned long timeout = jiffies + (ctrl->shutdown_timeout * HZ);
- u32 csts;
int ret;
ctrl->ctrl_config &= ~NVME_CC_SHN_MASK;
@@ -2387,22 +2387,8 @@ int nvme_shutdown_ctrl(struct nvme_ctrl *ctrl)
ret = ctrl->ops->reg_write32(ctrl, NVME_REG_CC, ctrl->ctrl_config);
if (ret)
return ret;
-
- while ((ret = ctrl->ops->reg_read32(ctrl, NVME_REG_CSTS, &csts)) == 0) {
- if ((csts & NVME_CSTS_SHST_MASK) == NVME_CSTS_SHST_CMPLT)
- break;
-
- msleep(100);
- if (fatal_signal_pending(current))
- return -EINTR;
- if (time_after(jiffies, timeout)) {
- dev_err(ctrl->device,
- "Device shutdown incomplete; abort shutdown\n");
- return -ENODEV;
- }
- }
-
- return ret;
+ return nvme_wait_ready(ctrl, NVME_CSTS_SHST_MASK, NVME_CSTS_SHST_CMPLT,
+ ctrl->shutdown_timeout, "shutdown");
}
EXPORT_SYMBOL_GPL(nvme_shutdown_ctrl);
--
2.30.2
next prev parent reply other threads:[~2022-11-29 13:22 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-29 13:21 remove path cleanups Christoph Hellwig
2022-11-29 13:22 ` [PATCH 1/9] nvme-apple: fix controller shutdown in apple_nvme_disable Christoph Hellwig
2022-11-29 15:41 ` Hector Martin
2023-01-10 17:47 ` Janne Grunau
2023-01-11 4:09 ` Hector Martin
2023-01-11 9:30 ` Linux kernel regression tracking (#adding)
2022-12-06 10:37 ` Eric Curtin
2022-12-06 12:15 ` Sagi Grimberg
2022-11-29 13:22 ` Christoph Hellwig [this message]
2022-11-29 15:57 ` [PATCH 2/9] nvme: use nvme_wait_ready in nvme_shutdown_ctrl Pankaj Raghav
2022-11-30 13:57 ` Christoph Hellwig
2022-11-30 14:27 ` Pankaj Raghav
2022-11-30 16:15 ` Keith Busch
2022-12-06 13:33 ` Christoph Hellwig
2022-11-29 13:22 ` [PATCH 3/9] nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl Christoph Hellwig
2022-11-29 15:44 ` Hector Martin
2022-12-06 12:18 ` Sagi Grimberg
2022-11-29 13:22 ` [PATCH 4/9] nvme-pci: remove nvme_disable_admin_queue Christoph Hellwig
2022-12-06 10:38 ` Eric Curtin
2022-12-06 12:18 ` Sagi Grimberg
2022-11-29 13:22 ` [PATCH 5/9] nvme-pci: remove nvme_pci_disable Christoph Hellwig
2022-12-06 10:39 ` Eric Curtin
2022-12-06 12:19 ` Sagi Grimberg
2022-11-29 13:22 ` [PATCH 6/9] nvme-pci: cleanup nvme_suspend_queue Christoph Hellwig
2022-12-06 12:20 ` Sagi Grimberg
2022-11-29 13:22 ` [PATCH 7/9] nvme-pci: rename nvme_disable_io_queues Christoph Hellwig
2022-12-06 12:21 ` Sagi Grimberg
2022-11-29 13:22 ` [PATCH 8/9] nvme-pci: return early on ctrl state mismatch in nvme_reset_work Christoph Hellwig
2022-12-06 11:26 ` Keith Busch
2022-12-06 13:38 ` Christoph Hellwig
2022-12-06 12:21 ` Sagi Grimberg
2022-11-29 13:22 ` [PATCH 9/9] nvme-pci: split out a nvme_pci_ctrl_is_dead helper Christoph Hellwig
2022-12-06 12:23 ` Sagi Grimberg
2022-12-06 8:18 ` remove path cleanups Christoph Hellwig
2022-12-06 11:26 ` Keith Busch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221129132208.4337-3-hch@lst.de \
--to=hch@lst.de \
--cc=asahi@lists.linux.dev \
--cc=james.smart@broadcom.com \
--cc=kbusch@kernel.org \
--cc=kch@nvidia.com \
--cc=linux-nvme@lists.infradead.org \
--cc=marcan@marcan.st \
--cc=sagi@grimberg.me \
--cc=sven@svenpeter.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox