[PATCH V6 0/1] nvme: allow passthru cmd error logging

[Chaitanya Kulkarni <kch@nvidia.com>]

Hi,

In nvme_end_req() we only log errors which are for non-passthru
commands. Add a helper function nvme_log_err_passthru() that allows us
to log error for passthru commands by decoding cdw10-cdw15 values of
nvme command.

Below is short testlog :-

* Admin Passsthru error log off, no errors are printed
* Admin Passsthru error log on, errors are printed
* IO Passsthru error log off, errors are printed
* IO Passsthru error log on, errors are printed

-ck

Chaitanya Kulkarni (1):
  nvme: allow passthru cmd error logging

v6:
- Reabse, etest nvme-6.5 and add test log for admin and I/O
  passthru error log.

v5:
- Trim down code in the nvme_log_error_passthrough().
  Use following to get the disk name as an arg to
   pr_err_ratelimited() :-
	ns ? ns->disk->disk_name : dev_name(nr->ctrl->device),
  Use following to get the admin vs I/O opcode string as an arg to
  pr_err_ratelimited() :-
       	ns ? nvme_get_opcode_str(nr->cmd->common.opcode) :
       	     nvme_get_admin_opcode_str(nr->cmd->common.opcode),
- Rename nvme_log_error_passthrough() -> nvme_log_err_passthru().
- Remove else and return directly in nvme_passthru_err_log_show().
- Generate error on invalid values of the passthru_enable variable
  in nvme_passthru_log_store().
- Rename passthrough -> passthru.
- Rename sysfs attr from passthru_admin_err_logging -> passthru_log_err.

v4:
- Change sysfs attribute to passthru_admin_err_logging
- Only log passthrough admin commands.  IO passthrough commands will
  always be logged.

v3:
- Log a passthrough specific message that dumps CDW* contents.
- Enable/disable vis sysfs rather than debugfs.

v2:
- Included Pankaj Raghav's patch 'nvme: ignore starting sector while 
  error logging for passthrough requests'
  with a couple changes.
- Moved error_logging flag to nvme_ctrl structure
- The entire nvme-debugfs.c does not need to be guarded by 
  #ifdef CONFIG_FAULT_INJECTION_DEBUG_FS.
- Use IS_ENABLED((CONFIG_NVME_ERROR_LOGGING_DEBUG_FS)) to determine if 
  error logging should be initialized.
- Various other nits.

 drivers/nvme/host/core.c  | 43 ++++++++++++++++++++++++++++++++++-----
 drivers/nvme/host/nvme.h  |  1 +
 drivers/nvme/host/sysfs.c | 39 +++++++++++++++++++++++++++++++++++
 3 files changed, 78 insertions(+), 5 deletions(-)

* Admin Passsthru error log off, no errors are printed :-

nvme (nvme-6.5) #
nvme (nvme-6.5) # echo 0 > /sys/class/nvme/nvme0/passthru_err_log
nvme (nvme-6.5) # nvme telemetry-log -o /tmp/test /dev/nvme0
NVMe status: Invalid Field in Command: A reserved coded value or an unsupported value in a defined field(0x4002)
Failed to acquire telemetry log 16386!
nvme (nvme-6.5) # cd -
/sys/kernel/debug/tracing/events/nvme
nvme # cd -
/mnt/data/nvme
nvme (nvme-6.5) # dmesg  -c

* Admin Passsthru error log on, errors are printed :-

nvme (nvme-6.5) # echo 1 > /sys/class/nvme/nvme0/passthru_err_log
nvme (nvme-6.5) # nvme telemetry-log -o /tmp/test /dev/nvme0
NVMe status: Invalid Field in Command: A reserved coded value or an unsupported value in a defined field(0x4002)
Failed to acquire telemetry log 16386!
nvme (nvme-6.5) # dmesg  -c
[  860.013105] nvme0: Get Log Page(0x2), Invalid Field in Command (sct 0x0 / sc 0x2) DNR cdw10=0x7f0107 cdw11=0x0 cdw12=0x0 cdw13=0x0 cdw14=0x0 cdw15=0x0
nvme (nvme-6.5) #
nvme (nvme-6.5) #

* IO Passsthru error log off, errors are printed :-

nvme (nvme-6.5) #  echo 0 > /sys/class/nvme/nvme0/passthru_err_log
nvme (nvme-6.5) # nvme write-zeroes -n 1 -s 0x200000 -c 10 /dev/nvme0
NVMe status: LBA Out of Range: The command references an LBA that exceeds the size of the namespace(0x4080)
nvme (nvme-6.5) # dmesg -c
[73675.769162] nvme nvme0: using deprecated NVME_IOCTL_IO_CMD ioctl on the char device!
[73675.769233] nvme0n1: Write Zeroes(0x8), LBA Out of Range (sct 0x0 / sc 0x80) DNR cdw10=0x200000 cdw11=0x0 cdw12=0xa cdw13=0x0 cdw14=0x0 cdw15=0x0

* IO Passsthru error log on, errors are printed :-

nvme (nvme-6.5) #  echo 1 > /sys/class/nvme/nvme0/passthru_err_log
nvme (nvme-6.5) # nvme write-zeroes -n 1 -s 0x200000 -c 10 /dev/nvme0
NVMe status: LBA Out of Range: The command references an LBA that exceeds the size of the namespace(0x4080)
nvme (nvme-6.5) # dmesg -c
[73684.208241] nvme nvme0: using deprecated NVME_IOCTL_IO_CMD ioctl on the char device!
[73684.208419] nvme0n1: Write Zeroes(0x8), LBA Out of Range (sct 0x0 / sc 0x80) DNR cdw10=0x200000 cdw11=0x0 cdw12=0xa cdw13=0x0 cdw14=0x0 cdw15=0x0
nvme (nvme-6.5) # 

-- 
2.40.0