From: swise@opengridcomputing.com (Steve Wise)
Subject: [PATCH v5 5/6] nvme-rdma: add DELETING queue flag
Date: Fri, 2 Sep 2016 09:01:54 -0700 [thread overview]
Message-ID: <3fee4ad93b127f1c0391e107e98034fecbc31725.1472833420.git.swise@opengridcomputing.com> (raw)
In-Reply-To: <cover.1472833420.git.swise@opengridcomputing.com>
From: Sagi Grimberg <sagi@grimberg.me>
When we get a surprise disconnect from the target we queue a periodic
reconnect (which is the sane thing to do...).
We only move the queues out of CONNECTED when we retry to reconnect (after
10 seconds in the default case) but we stop the blk queues immediately
so we are not bothered with traffic from now on. If delete() is kicking
off in this period the queues are still in CONNECTED state.
Part of the delete sequence is trying to issue ctrl shutdown if the
admin queue is CONNECTED (which it is!). This request is issued but
stuck in blk-mq waiting for the queues to start again. This might be
the one preventing us from forward progress...
The patch separates the queue flags to CONNECTED and DELETING. Now we
will move out of CONNECTED as soon as error recovery kicks in (before
stopping the queues) and DELETING is on when we start the queue deletion.
Signed-off-by: Sagi Grimberg <sagi at grimberg.me>
---
drivers/nvme/host/rdma.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index a9d43f0..9ea69cc 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -83,6 +83,7 @@ struct nvme_rdma_request {
enum nvme_rdma_queue_flags {
NVME_RDMA_Q_CONNECTED = (1 << 0),
NVME_RDMA_IB_QUEUE_ALLOCATED = (1 << 1),
+ NVME_RDMA_Q_DELETING = (1 << 2),
};
struct nvme_rdma_queue {
@@ -616,7 +617,7 @@ static void nvme_rdma_free_queue(struct nvme_rdma_queue *queue)
static void nvme_rdma_stop_and_free_queue(struct nvme_rdma_queue *queue)
{
- if (!test_and_clear_bit(NVME_RDMA_Q_CONNECTED, &queue->flags))
+ if (test_and_set_bit(NVME_RDMA_Q_DELETING, &queue->flags))
return;
nvme_rdma_stop_queue(queue);
nvme_rdma_free_queue(queue);
@@ -769,8 +770,13 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work)
{
struct nvme_rdma_ctrl *ctrl = container_of(work,
struct nvme_rdma_ctrl, err_work);
+ int i;
nvme_stop_keep_alive(&ctrl->ctrl);
+
+ for (i = 0; i < ctrl->queue_count; i++)
+ clear_bit(NVME_RDMA_Q_CONNECTED, &ctrl->queues[i].flags);
+
if (ctrl->queue_count > 1)
nvme_stop_queues(&ctrl->ctrl);
blk_mq_stop_hw_queues(ctrl->ctrl.admin_q);
@@ -1350,7 +1356,7 @@ static int nvme_rdma_device_unplug(struct nvme_rdma_queue *queue)
cancel_delayed_work_sync(&ctrl->reconnect_work);
/* Disable the queue so ctrl delete won't free it */
- if (test_and_clear_bit(NVME_RDMA_Q_CONNECTED, &queue->flags)) {
+ if (!test_and_set_bit(NVME_RDMA_Q_DELETING, &queue->flags)) {
/* Free this queue ourselves */
nvme_rdma_stop_queue(queue);
nvme_rdma_destroy_queue_ib(queue);
--
2.7.0
next prev parent reply other threads:[~2016-09-02 16:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-02 16:23 [PATCH v5 0/6] nvme-rdma device removal fixes Steve Wise
2016-09-01 13:43 ` [PATCH v5 1/6] iw_cxgb4: call dev_put() on l2t allocation failure Steve Wise
2016-09-01 13:44 ` [PATCH v5 2/6] iw_cxgb4: block module unload until all ep resources are released Steve Wise
2016-09-01 16:12 ` [PATCH v5 3/6] nvme_rdma: keep a ref on the ctrl during delete/flush Steve Wise
2016-09-02 16:01 ` [PATCH v5 4/6] nvme-rdma: destroy nvme queue rdma resources on connect failure Steve Wise
2016-09-02 16:01 ` [PATCH v5 6/6] nvme-rdma: use ib_client API to detect device removal Steve Wise
2016-09-02 16:01 ` Steve Wise [this message]
2016-09-04 7:01 ` [PATCH v5 0/6] nvme-rdma device removal fixes Sagi Grimberg
2016-09-12 14:49 ` Steve Wise
2016-09-12 14:58 ` Sagi Grimberg
2016-09-12 15:00 ` Steve Wise
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3fee4ad93b127f1c0391e107e98034fecbc31725.1472833420.git.swise@opengridcomputing.com \
--to=swise@opengridcomputing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).