Linux-NVME Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Anderson <sean.anderson@linux.dev>
To: Wentao Guan <guanwentao@uniontech.com>,
	kbusch@kernel.org, linux-nvme@lists.infradead.org
Cc: hch@lst.de, linux-kernel@vger.kernel.org, hedgehog-002@163.com,
	rugk+github@posteo.de, wangyuli@uniontech.com,
	zhanjun@uniontech.com, niecheng1@uniontech.com,
	wentaoguan@vip.qq.com
Subject: Re: [PATCH] drivers/nvme: Add quirks for WDC Blue SN550 15b7:5009
Date: Thu, 24 Apr 2025 11:22:27 -0400	[thread overview]
Message-ID: <634e9a87-dcde-46a0-aac6-b29ac9bb00eb@linux.dev> (raw)
In-Reply-To: <20250424024010.308175-1-guanwentao@uniontech.com>

On 4/23/25 22:40, Wentao Guan wrote:
> Add two quirks for the WDC Blue SN550 (PCI ID 15b7:5009) based on user
> reports and hardware analysis:
> 
> NVME_QUIRK_NO_DEEPEST_PS:
> liaozw talked to me the problem and solved with
> nvme_core.default_ps_max_latency_us=0, so add the quirk.
> I also found some reports in the following link.
> 
> NVME_QUIRK_BROKEN_MSI:
> after get the lspci from Jack Rio.
> I think that the disk also have NVME_QUIRK_BROKEN_MSI.
> described in commit d5887dc6b6c0 ("nvme-pci: Add quirk for broken MSIs")
> as sean said in link which match the MSI 1/32 and MSI-X 17.

As an update on this, in the link I say

| Well, the response from WD support was "we don't support Linux, and if
| we did there aren't any bugs in the drive anyway".

I continued following up with this (which involved running some
"diagnostic software" on a windows machine) and eventually they said:

| Please allow me to inform you that the provided part number SKU is an
| OEM Lenovo product. Western Digital Technical Support does not provide
| support (firmware or otherwise) for OEM (Original Equipment
| Manufacturer) drives. We would suggest you to contact your Laptop
| manufacturer. 

and that's as far as I took it. It seems like this bug is still present
in other SanDisk drives, so maybe you can take a crack at reporting it
if your drive isn't an OEM SKU.

--Sean

> Log:
> lspci -nn | grep -i memory
> 03:00.0 Non-Volatile memory controller [0108]: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) [15b7:5009] (rev 01)
> lspci -v -d 15b7:5009
> 03:00.0 Non-Volatile memory controller: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) (rev 01) (prog-if 02 [NVM Express])
>         Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD
>         Flags: bus master, fast devsel, latency 0, IRQ 35, IOMMU group 10
>         Memory at fe800000 (64-bit, non-prefetchable) [size=16K]
>         Memory at fe804000 (64-bit, non-prefetchable) [size=256]
>         Capabilities: [80] Power Management version 3
>         Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
>         Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
>         Capabilities: [c0] Express Endpoint, MSI 00
>         Capabilities: [100] Advanced Error Reporting
>         Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
>         Capabilities: [1b8] Latency Tolerance Reporting
>         Capabilities: [300] Secondary PCI Express
>         Capabilities: [900] L1 PM Substates
>         Kernel driver in use: nvme
> dmesg | grep nvme
> [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE=
> [    0.059301] Kernel command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE=
> [    0.542430] nvme nvme0: pci function 0000:03:00.0
> [    0.560426] nvme nvme0: allocated 32 MiB host memory buffer.
> [    0.562491] nvme nvme0: 16/0/0 default/read/poll queues
> [    0.567764]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9
> [    6.388726] EXT4-fs (nvme0n1p7): mounted filesystem ro with ordered data mode. Quota mode: none.
> [    6.893421] EXT4-fs (nvme0n1p7): re-mounted r/w. Quota mode: none.
> [    7.125419] Adding 16777212k swap on /dev/nvme0n1p8.  Priority:-2 extents:1 across:16777212k SS
> [    7.157588] EXT4-fs (nvme0n1p6): mounted filesystem r/w with ordered data mode. Quota mode: none.
> [    7.165021] EXT4-fs (nvme0n1p9): mounted filesystem r/w with ordered data mode. Quota mode: none.
> [    8.036932] nvme nvme0: using unchecked data buffer
> [    8.096023] block nvme0n1: No UUID available providing old NGUID
> 
> Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d5887dc6b6c054d0da3cd053afc15b7be1f45ff6
> Link: https://lore.kernel.org/all/20240422162822.3539156-1-sean.anderson@linux.dev/
> Reported-by: liaozw <hedgehog-002@163.com>
> Closes: https://bbs.deepin.org.cn/post/286300
> Reported-by: rugk <rugk+github@posteo.de>
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=208123
> Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
> ---
>  drivers/nvme/host/pci.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> index 8eee28282b1e9..b6153f595076b 100644
> --- a/drivers/nvme/host/pci.c
> +++ b/drivers/nvme/host/pci.c
> @@ -3453,6 +3453,9 @@ static const struct pci_device_id nvme_id_table[] = {
>  				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
>  	{ PCI_DEVICE(0x15b7, 0x5008),   /* Sandisk SN530 */
>  		.driver_data = NVME_QUIRK_BROKEN_MSI },
> +	{ PCI_DEVICE(0x15b7, 0x5009),   /* Sandisk SN550 */
> +		.driver_data = NVME_QUIRK_BROKEN_MSI |
> +				NVME_QUIRK_NO_DEEPEST_PS },
>  	{ PCI_DEVICE(0x1987, 0x5012),	/* Phison E12 */
>  		.driver_data = NVME_QUIRK_BOGUS_NID, },
>  	{ PCI_DEVICE(0x1987, 0x5016),	/* Phison E16 */


  reply	other threads:[~2025-04-24 16:07 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-24  2:40 [PATCH] drivers/nvme: Add quirks for WDC Blue SN550 15b7:5009 Wentao Guan
2025-04-24 15:22 ` Sean Anderson [this message]
2025-04-29 13:10 ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=634e9a87-dcde-46a0-aac6-b29ac9bb00eb@linux.dev \
    --to=sean.anderson@linux.dev \
    --cc=guanwentao@uniontech.com \
    --cc=hch@lst.de \
    --cc=hedgehog-002@163.com \
    --cc=kbusch@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=niecheng1@uniontech.com \
    --cc=rugk+github@posteo.de \
    --cc=wangyuli@uniontech.com \
    --cc=wentaoguan@vip.qq.com \
    --cc=zhanjun@uniontech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox