Re: [PATCH] nvme: find numa distance only if controller has valid numa id

[Sagi Grimberg <sagi@grimberg.me>]

On 14/04/2024 14:02, Nilay Shroff wrote:
>
> On 4/14/24 14:00, Sagi Grimberg wrote:
>>
>> On 13/04/2024 12:04, Nilay Shroff wrote:
>>> On numa aware system where native nvme multipath is configured and
>>> iopolicy is set to numa but the nvme controller numa node id is
>>> undefined or -1 (NUMA_NO_NODE) then avoid calculating node distance
>>> for finding optimal io path. In such case we may access numa distance
>>> table with invalid index and that may potentially refer to incorrect
>>> memory. So this patch ensures that if the nvme controller numa node
>>> id is -1 then instead of calculating node distance for finding optimal
>>> io path, we set the numa node distance of such controller to default 10
>>> (LOCAL_DISTANCE).
>> Patch looks ok to me, but it is not clear weather this fixes a real issue or not.
>>
> I think this patch does help fix a real issue. I have a numa aware system where
> I have a multi port/controller NNVMe PCIe disk attached. On this system, I found
> that sometimes the nvme controller numa id is set to -1 (NUMA_NO_NODE). And the
> reason being, my system has processors and memory coming from one or more NUMA nodes
> and the NVMe PCIe device is coming from a NUMA node which is different. For example,
> we could have processors coming from node 0 and node 1, but the PCIe device coming from
> node 2, and we don't have any processor coming from node 2, so there would be no way for
> Linux to affinitize the PCIe device with a processor and hence while enumerating PCIe
> device kernel sets the numa id of such device to -1. Later if we hotplug CPU on node 2
> then kernel would assign the numa node id 2 to the PCIe device.
>
> For instance, I have a system with two numa nodes currently online. I also have
> a multi controller NVMe PCIe disk attached to this system:
>
> # numactl -H
> available: 2 nodes (2-3)
> node 2 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
> node 2 size: 15290 MB
> node 2 free: 14200 MB
> node 3 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
> node 3 size: 16336 MB
> node 3 free: 15075 MB
> node distances:
> node   2   3
>    2:  10  20
>    3:  20  10
>
> As we could see above on this system I have currently numa node 2 and 3 online.
> And I have CPUs coming from node 2 and 3.
>
> # lspci
> 052e:78:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM173Xa
> 058e:78:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM173Xa
>
> # nvme list -v
> Subsystem        Subsystem-NQN                                                                                    Controllers
> ---------------- ------------------------------------------------------------------------------------------------ ----------------
> nvme-subsys3     nqn.1994-11.com.samsung:nvme:PM1735a:2.5-inch:S6RTNE0R900057                                     nvme1, nvme3
>
> Device   SN                   MN                                       FR       TxPort Asdress        Slot   Subsystem    Namespaces
> -------- -------------------- ---------------------------------------- -------- ------ -------------- ------ ------------ ----------------
> nvme1    S6RTNE0R900057       3.2TB NVMe Gen4 U.2 SSD III              REV.SN66 pcie   052e:78:00.0          nvme-subsys3 nvme3n1
> nvme3    S6RTNE0R900057       3.2TB NVMe Gen4 U.2 SSD III              REV.SN66 pcie   058e:78:00.0          nvme-subsys3 nvme3n1, nvme3n2
>
> Device       Generic      NSID       Usage                      Format           Controllers
> ------------ ------------ ---------- -------------------------- ---------------- ----------------
> /dev/nvme3n1 /dev/ng3n1   0x1          5.75  GB /   5.75  GB      4 KiB +  0 B   nvme1, nvme3
> /dev/nvme3n2 /dev/ng3n2   0x2          5.75  GB /   5.75  GB      4 KiB +  0 B   nvme3
>
> # cat ./sys/devices/pci058e:78/058e:78:00.0/numa_node
> 2
> # cat ./sys/devices/pci052e:78/052e:78:00.0/numa_node
> -1
>
> # cat /sys/class/nvme/nvme3/numa_node
> 2
> # cat /sys/class/nvme/nvme1/numa_node
> -1
>
> As we could see above I have multi controller NVMe disk atatched to this system. This disk
> has 2 controllers. However the numa node id assigned to one of the controller (nvme1) is -1.
> This is because on this system, currently I don't have any processor coming from a numa node
> where nvme1 controller numa node could be be affinitized.

Thanks for the explanation. But what is the bug you see in this 
configuration? panic? suboptimal performance?
which is it? it is not clear from the patch description.