From mboxrd@z Thu Jan  1 00:00:00 1970
From: kenneth.heitke@intel.com (Heitke, Kenneth)
Date: Tue, 7 May 2019 11:28:16 -0600
Subject: [PATCH v2 4/7] nvme.h: add telemetry log page definisions
In-Reply-To: <1557248314-4238-5-git-send-email-akinobu.mita@gmail.com>
References: <1557248314-4238-1-git-send-email-akinobu.mita@gmail.com>
 <1557248314-4238-5-git-send-email-akinobu.mita@gmail.com>
Message-ID: <81c0d1bd-c117-3fcb-959b-4507504021dd@intel.com>



On 5/7/2019 10:58 AM, Akinobu Mita wrote:
> Copy telemetry log page definisions from nvme-cli.
> 
> Cc: Johannes Berg <johannes at sipsolutions.net>
> Cc: Keith Busch <keith.busch at intel.com>
> Cc: Jens Axboe <axboe at fb.com>
> Cc: Christoph Hellwig <hch at lst.de>
> Cc: Sagi Grimberg <sagi at grimberg.me>
> Cc: Minwoo Im <minwoo.im.dev at gmail.com>
> Signed-off-by: Akinobu Mita <akinobu.mita at gmail.com>
> ---
> * v2
> - New patch in this version.
> 
>   include/linux/nvme.h | 23 +++++++++++++++++++++++
>   1 file changed, 23 insertions(+)
> 
> diff --git a/include/linux/nvme.h b/include/linux/nvme.h
> index c40720c..5217fe4 100644
> --- a/include/linux/nvme.h
> +++ b/include/linux/nvme.h
> @@ -396,6 +396,28 @@ enum {
>   	NVME_NIDT_UUID		= 0x03,
>   };
>   
> +/* Derived from 1.3a Figure 101: Get Log Page ? Telemetry Host
> + * -Initiated Log (Log Identifier 07h)
> + */
> +struct nvme_telemetry_log_page_hdr {
> +	__u8    lpi; /* Log page identifier */
> +	__u8    rsvd[4];
> +	__u8    iee_oui[3];
> +	__le16  dalb1; /* Data area 1 last block */
> +	__le16  dalb2; /* Data area 2 last block */
> +	__le16  dalb3; /* Data area 3 last block */
> +	__u8    rsvd1[368]; /* TODO verify */

Remove the TODO

> +	__u8    ctrlavail; /* Controller initiated data avail?*/
> +	__u8    ctrldgn; /* Controller initiated telemetry Data Gen # */
> +	__u8    rsnident[128];
> +	/* We'll have to double fetch so we can get the header,
> +	 * parse dalb1->3 determine how much size we need for the
> +	 * log then alloc below. Or just do a secondary non-struct
> +	 * allocation.
> +	 */

This comment isn't necessary. You usually can't read the entire
telemetry log at once and the header is a fixed size. You would likely
just read the header followed by reads of the different data areas.

> +	__u8    telemetry_dataarea[0];
> +};
> +
>   struct nvme_smart_log {
>   	__u8			critical_warning;
>   	__u8			temperature[2];
> @@ -832,6 +854,7 @@ enum {
>   	NVME_LOG_FW_SLOT	= 0x03,
>   	NVME_LOG_CHANGED_NS	= 0x04,
>   	NVME_LOG_CMD_EFFECTS	= 0x05,
> +	NVME_LOG_TELEMETRY_CTRL	= 0x08,
>   	NVME_LOG_ANA		= 0x0c,
>   	NVME_LOG_DISC		= 0x70,
>   	NVME_LOG_RESERVATION	= 0x80,
>