From: ddutile@redhat.com (Don Dutile)
Subject: [pci PATCH v7 0/5] Add support for unmanaged SR-IOV
Date: Fri, 16 Mar 2018 17:42:44 -0400 [thread overview]
Message-ID: <a411bbf7-23ba-60e6-2673-4f200f36db9b@redhat.com> (raw)
In-Reply-To: <20180315183449.3102.64791.stgit@localhost.localdomain>
On 03/15/2018 02:40 PM, Alexander Duyck wrote:
> This series is meant to add support for SR-IOV on devices when the VFs are
> not managed by the kernel. Examples of recent patches attempting to do this
> include:
> virto - https://patchwork.kernel.org/patch/10241225/
> pci-stub - https://patchwork.kernel.org/patch/10109935/
> vfio - https://patchwork.kernel.org/patch/10103353/
> uio - https://patchwork.kernel.org/patch/9974031/
>
> Since this is quickly blowing up into a multi-driver problem it is probably
> best to implement this solution as generically as possible.
>
> This series is an attempt to do that. What we do with this patch set is
> provide a generic framework to enable SR-IOV in the case that the PF driver
> doesn't support managing the VFs itself.
>
> I based my patch set originally on the patch by Mark Rustad but there isn't
> much left after going through and cleaning out the bits that were no longer
> needed, and after incorporating the feedback from David Miller. At this point
> the only items to be fully reused was his patch description which is now
> present in patch 3 of the set.
>
> This solution is limited in scope to just adding support for devices that
> provide no functionality for SR-IOV other than allocating the VFs by
> calling pci_enable_sriov. Previous sets had included patches for VFIO, but
> for now I am dropping that as the scope of that work is larger then I
> think I can take on at this time.
>
> v2: Reduced scope back to just virtio_pci and vfio-pci
> Broke into 3 patch set from single patch
> Changed autoprobe behavior to always set when num_vfs is set non-zero
> v3: Updated Documentation to clarify when sriov_unmanaged_autoprobe is used
> Wrapped vfio_pci_sriov_configure to fix build errors w/o SR-IOV in kernel
> v4: Dropped vfio-pci patch
> Added ena and nvme to drivers now using pci_sriov_configure_unmanaged
> Dropped pci_disable_sriov call in virtio_pci to be consistent with ena
> v5: Dropped sriov_unmanaged_autoprobe and pci_sriov_conifgure_unmanaged
> Added new patch that enables pci_sriov_configure_simple
> Updated drivers to use pci_sriov_configure_simple
> v6: Defined pci_sriov_configure_simple as NULL when SR-IOV is not enabled
> Updated drivers to drop "#ifdef" checks for IOV
> Added pci-pf-stub as place for PF-only drivers to add support
> v7: Dropped pci_id table explanation from pci-pf-stub driver
> Updated pci_sriov_configure_simple to drop need for err value
> Fixed comment explaining why pci_sriov_configure_simple is NULL
>
> Cc: Mark Rustad <mark.d.rustad at intel.com>
> Cc: Maximilian Heyne <mheyne at amazon.de>
> Cc: Liang-Min Wang <liang-min.wang at intel.com>
> Cc: David Woodhouse <dwmw at amazon.co.uk>
>
> ---
>
> Alexander Duyck (5):
> pci: Add pci_sriov_configure_simple for PFs that don't manage VF resources
> virtio_pci: Add support for unmanaged SR-IOV on virtio_pci devices
> ena: Migrate over to unmanaged SR-IOV support
> nvme: Migrate over to unmanaged SR-IOV support
> pci-pf-stub: Add PF driver stub for PFs that function only to enable VFs
>
>
> drivers/net/ethernet/amazon/ena/ena_netdev.c | 28 -------------
> drivers/nvme/host/pci.c | 20 ----------
> drivers/pci/Kconfig | 12 ++++++
> drivers/pci/Makefile | 2 +
> drivers/pci/iov.c | 31 +++++++++++++++
> drivers/pci/pci-pf-stub.c | 54 ++++++++++++++++++++++++++
> drivers/virtio/virtio_pci_common.c | 1
> include/linux/pci.h | 3 +
> include/linux/pci_ids.h | 2 +
> 9 files changed, 107 insertions(+), 46 deletions(-)
> create mode 100644 drivers/pci/pci-pf-stub.c
>
> --
>
For what it's worth.
Good, simpler start for this type of support/effort.
Thanks for the multiple versions to get to this point.
Reviewed-by: Donald Dutile <ddutile at redhat.com>
next prev parent reply other threads:[~2018-03-16 21:42 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-15 18:40 [pci PATCH v7 0/5] Add support for unmanaged SR-IOV Alexander Duyck
2018-03-15 18:41 ` [pci PATCH v7 1/5] pci: Add pci_sriov_configure_simple for PFs that don't manage VF resources Alexander Duyck
2018-03-28 21:30 ` [virtio-dev] " Rustad, Mark D
2018-03-15 18:42 ` [pci PATCH v7 2/5] virtio_pci: Add support for unmanaged SR-IOV on virtio_pci devices Alexander Duyck
2018-03-16 16:34 ` [virtio-dev] " Michael S. Tsirkin
2018-03-16 16:40 ` Alexander Duyck
2018-04-03 13:12 ` Michael S. Tsirkin
2018-04-03 17:32 ` Alexander Duyck
2018-04-03 18:27 ` Michael S. Tsirkin
2018-04-03 19:06 ` Alexander Duyck
2018-04-20 0:40 ` Michael S. Tsirkin
2018-04-20 14:56 ` Alexander Duyck
2018-04-20 15:28 ` Michael S. Tsirkin
2018-04-20 16:08 ` Alexander Duyck
2018-04-20 16:14 ` Michael S. Tsirkin
2018-04-21 7:05 ` Christoph Hellwig
2018-04-03 19:18 ` Rustad, Mark D
2018-03-28 21:31 ` Rustad, Mark D
2018-04-03 13:11 ` [virtio-dev] " Michael S. Tsirkin
2018-03-15 18:43 ` [pci PATCH v7 3/5] ena: Migrate over to unmanaged SR-IOV support Alexander Duyck
2018-03-15 18:43 ` [pci PATCH v7 4/5] nvme: " Alexander Duyck
2018-03-15 18:44 ` [pci PATCH v7 5/5] pci-pf-stub: Add PF driver stub for PFs that function only to enable VFs Alexander Duyck
2018-03-16 21:42 ` Don Dutile [this message]
2018-04-19 22:54 ` [pci PATCH v7 0/5] Add support for unmanaged SR-IOV Alexander Duyck
2018-04-20 0:46 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a411bbf7-23ba-60e6-2673-4f200f36db9b@redhat.com \
--to=ddutile@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox