AW: AW: Help: OMAP5912 RS232 dies after kernel uncompressing.

["Juergen Sievers" <JSievers@NADINE-Software.com>]

Hi Nishanth.

That is a good hint and I did this already but it was not the reason.

Normal, before the ttyS0 was missing, the kernel's initializing messages
were shown on the rs323 line. But now - nothing appears after the kernel
code gets control.

I will try to reset the whole environment block to create a new and well
formatted environment. It seems to me something is wrong on these persistent
environment settings. Possible I have typed in an invisible control
character in one of these settings.

Mfg.
Juergen


> Opinion: check your /etc/inittab in the filesystem. maybe you have told
> getty to hook on to the wrong terminal... some common issues is the
> getty given wrong baud rate OR given tty0 while ttyS0 is being used
> etc.. that is a nice place to check.. but do try this: give
> "init=/bin/sh" along with ur boot options(given the rest of the
> symptoms, this should work).. if u manage to boot off that.. u need to
> look deep into ur boot sequence of filesystem -such as rc scripts etc if
> you have any.
> 
> Regards,
> Nishanth Menon