[PATCH 00/11] OMAP3 CPUidle patches

["Rajendra Nayak" <rnayak@ti.com>]

Hi,

The following patches define and enable all of the below mentioned C states for OMAP3. 
These are tested with a minimal kernel config on OMAP3430sdp as most drivers today don't have context save/restore in place and
some even lack aggresive clock handling. 
These apply on top of the workaround patch set submitted by Jouni. 
([PATCH 0/6] 34XX: PM: Workarounds to get omap3 to retention 4th.)

The following is neccessay even with a minimal config to achieve OFF.
 $ echo 1 > /sys/power/sleep_while_idle
 $ echo 1 > /sys/power/clocks_off_while_idle
  
The following C states are defined
C0 - System executing code
C1 - MPU WFI + Core active
C2 - MPU CSWR + Core active
C3 - MPU OFF + Core active
C4 - MPU CSWR + Core CSWR
C5 - MPU OFF + Core CSWR
C6 - MPU OFF + Core OFF
 
regards,
Rajendra