[RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430

[RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430

[Madhusudhan Chikkature Rajashekar]

Hi All,

I am posting a five patches series to support HDQ/1-wire module of OMAP2430 and 3430 platforms. The HDQ support is internally tested
using a bq27000 battery driver.

Please let me know if there are any comments on my patch set.

Evgeniy Polyakov,
I would like to thank you for clearing my doubts about the W1 subsystem.
Please let me know if you have any further comments on my patches.

Thanks,
Madhu

RE: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430

[Madhusudhan Chikkature Rajashekar]

Hi,

>You resolved all issues with patchet we were talking about, so I only
>would like to see documentation update about how hdq operates in w1
>stack and kernel parameters you are using in the driver.
 Sure. I will write the necessary documentation.

Thanks,
Madhu

-----Original Message-----
From: Evgeniy Polyakov [mailto:johnpol@2ka.mipt.ru] 
Sent: Monday, December 10, 2007 5:04 PM
To: Madhusudhan Chikkature Rajashekar
Cc: linux-omap-open-source@linux.omap.com; linux-omap@vger.kernel.org
Subject: Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430

Hi.

On Mon, Dec 10, 2007 at 03:45:25PM +0530, Madhusudhan Chikkature Rajashekar (madhu.cr@ti.com) wrote:
> I am posting a five patches series to support HDQ/1-wire module of OMAP2430 and 3430 platforms. The HDQ support is internally
tested
> using a bq27000 battery driver.
> 
> Please let me know if there are any comments on my patch set.
> 
> Evgeniy Polyakov,
> I would like to thank you for clearing my doubts about the W1 subsystem.
> Please let me know if you have any further comments on my patches.

Ack, thanks a lot for your work.

You resolved all issues with patchet we were talking about, so I only
would like to see documentation update about how hdq operates in w1
stack and kernel parameters you are using in the driver.

-- 
	Evgeniy Polyakov

Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430

[Tony Lindgren]

* Madhusudhan Chikkature Rajashekar <madhu.cr@ti.com> [071210 04:02]:
> Hi,
> 
> >You resolved all issues with patchet we were talking about, so I only
> >would like to see documentation update about how hdq operates in w1
> >stack and kernel parameters you are using in the driver.
>  Sure. I will write the necessary documentation.
> 
> Thanks,
> Madhu
> 
> -----Original Message-----
> From: Evgeniy Polyakov [mailto:johnpol@2ka.mipt.ru] 
> Sent: Monday, December 10, 2007 5:04 PM
> To: Madhusudhan Chikkature Rajashekar
> Cc: linux-omap-open-source@linux.omap.com; linux-omap@vger.kernel.org
> Subject: Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430
> 
> Hi.
> 
> On Mon, Dec 10, 2007 at 03:45:25PM +0530, Madhusudhan Chikkature Rajashekar (madhu.cr@ti.com) wrote:
> > I am posting a five patches series to support HDQ/1-wire module of OMAP2430 and 3430 platforms. The HDQ support is internally
> tested
> > using a bq27000 battery driver.
> > 
> > Please let me know if there are any comments on my patch set.
> > 
> > Evgeniy Polyakov,
> > I would like to thank you for clearing my doubts about the W1 subsystem.
> > Please let me know if you have any further comments on my patches.
> 
> Ack, thanks a lot for your work.
> 
> You resolved all issues with patchet we were talking about, so I only
> would like to see documentation update about how hdq operates in w1
> stack and kernel parameters you are using in the driver.

Madhu, can you please repost your complete series one more time? Please
make sure the message subject describes what the patch does instead of
the same subject for all of them. The subject line appears in the git-commit
message, and it's a pain to re-edit each patch before applying.

Thanks,

Tony

RE: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430

[Madhusudhan Chikkature Rajashekar]

 

> -----Original Message-----
> From: Tony Lindgren [mailto:tony@atomide.com] 
> Sent: Sunday, December 16, 2007 5:52 AM
> To: Madhusudhan Chikkature Rajashekar
> Cc: 'Evgeniy Polyakov'; linux-omap@vger.kernel.org; 
> linux-omap-open-source@linux.omap.com
> Subject: Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430
> 
> * Madhusudhan Chikkature Rajashekar <madhu.cr@ti.com> [071210 04:02]:
> > Hi,
> > 
> > >You resolved all issues with patchet we were talking 
> about, so I only
> > >would like to see documentation update about how hdq operates in w1
> > >stack and kernel parameters you are using in the driver.
> >  Sure. I will write the necessary documentation.
> > 
> > Thanks,
> > Madhu
> > 
> > -----Original Message-----
> > From: Evgeniy Polyakov [mailto:johnpol@2ka.mipt.ru] 
> > Sent: Monday, December 10, 2007 5:04 PM
> > To: Madhusudhan Chikkature Rajashekar
> > Cc: linux-omap-open-source@linux.omap.com; 
> linux-omap@vger.kernel.org
> > Subject: Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430
> > 
> > Hi.
> > 
> > On Mon, Dec 10, 2007 at 03:45:25PM +0530, Madhusudhan 
> Chikkature Rajashekar (madhu.cr@ti.com) wrote:
> > > I am posting a five patches series to support HDQ/1-wire 
> module of OMAP2430 and 3430 platforms. The HDQ support is internally
> > tested
> > > using a bq27000 battery driver.
> > > 
> > > Please let me know if there are any comments on my patch set.
> > > 
> > > Evgeniy Polyakov,
> > > I would like to thank you for clearing my doubts about 
> the W1 subsystem.
> > > Please let me know if you have any further comments on my patches.
> > 
> > Ack, thanks a lot for your work.
> > 
> > You resolved all issues with patchet we were talking about, 
> so I only
> > would like to see documentation update about how hdq operates in w1
> > stack and kernel parameters you are using in the driver.
> 
> Madhu, can you please repost your complete series one more 
> time? Please
> make sure the message subject describes what the patch does instead of
> the same subject for all of them. The subject line appears in 
> the git-commit
> message, and it's a pain to re-edit each patch before applying.
Okay. I will repost the series with appropriate subject line.

> 
> Thanks,
> 
> Tony
>