From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Richard Copeman" Subject: RE: Kernel not working Date: Mon, 21 Nov 2005 15:51:03 -0000 Message-ID: <007f01c5eeb3$60c99ef0$642aa8c0@BUFFY> References: <20051121143139.83027.qmail@web32905.mail.mud.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20051121143139.83027.qmail@web32905.mail.mud.yahoo.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: 'Komal Shah' , linux-omap-open-source@linux.omap.com, 'Vineet Tuli' List-Id: linux-omap@vger.kernel.org Hello again, Please accept my apologies if I seem a little slow. I downloaded the pre-built 3.4.2 toolchain and it has the bug mentioned in the newbie guide so that Uboot 1.1.3 does not build. Since, I do not have the source to the 3.4.2 toolchain it is impossible for me to apply the patch recommended by the documentation to elf32-arm.h ;-( Can somebody point me at a pre built arm-linux tool chain so I can build Uboot 1.1.3 please? Or a pre-built Uboot.bin 1.1.3 for OMAP 5912OSK? Many thanks, Richard. -----Original Message----- From: Komal Shah [mailto:komal_shah802003@yahoo.com] Sent: 21 November 2005 14:32 To: Richard Copeman; linux-omap-open-source@linux.omap.com; 'Vineet Tuli' Subject: RE: Kernel not working --- Richard Copeman wrote: > Hi, > > Many thanks for the pointers. I have taken a look at the newbie > guide. I > have got a 2.6.13.4 kernel built with gcc 3.4.1 as per the > instructions in > the guide. I have the kernel image tftpboot loaded onto my OSK board > and > things progress a little further (but not much). > > I get: > > Starting kernel ... > > Uncompressing > Linux...................................................... > > And then it all stops. In the newbie guide there was a section about > this > and I have added the extra head-omap.o to my Makefile in > arch/arm/boot/compressed and rebuilt but still no improvement. > Grepping > through the build logs the object has been included so I'm guessing > my mods > worked ;-) > > On another point, my board does not allow me to save my Uboot > environment. > Typing save gives me: > > Saving E"@ironment to Flash... > Un-Protected 1 sectors > Erasing Flash...Can't erase unknown flash type 00000000 - aborted > Erased 1 sectors > Error: start and/or end address not on sector boundary > OMAP5912OSK# As I am not a OSK user, but I remember someone saying that updating the u-boot helps on OSK. Please try the latest version of u-boot then. ---Komal Shah http://komalshah.blogspot.com/ __________________________________ Yahoo! FareChase: Search multiple travel sites in one click. http://farechase.yahoo.com