RE: Problems building DSP gateway on 2.6.15

["Richard Copeman" <richard.copeman@lauterbach.co.uk>]

Toshihiro san,

Thanks for the pointer.
There is no OMAP DSP Gateway message displayed during my startup.
I do not do "make uImage". I use a JTAG debugger to download vmlinux
directly to RAM. What does "make uImage" do for me?

Thanks,

Richard.

-----Original Message-----
From: toshihiro.kobayashi@nokia.com [mailto:toshihiro.kobayashi@nokia.com] 
Sent: 22 March 2006 15:58
To: richard.copeman@lauterbach.co.uk; linux-omap-open-source@linux.omap.com
Subject: Re: Problems building DSP gateway on 2.6.15

Hi,

From: "Richard Copeman" <richard.copeman@lauterbach.co.uk>
Subject: Problems building DSP gateway on 2.6.15
Date: Tue, 21 Mar 2006 09:21:34 -0000

> Warning: none of /sys/devicesplatform/dsp.0/ifver,
> /sys/devices/platform/dsp0..
> 
> (DSP Gateway driver is too old or not loaded)
> 
> open control device: No such file or directory.

> In /sys/devices/platform I have: i2c_omap.1, omap_mcbsp.1, omapflash.0,
> serial8250.0, omap-keyboard, omap_t2, power, smc91x, omap_cf, omapfb,
> serial8250 and uevent.

There should be /sys/devices/platform/dsp directory if the DSP Gateway is
compiled in the kernel. 
Do you see "OMAP DSP driver initialization" in the boot message?
If yes, DSP Gateway is in your kernel and I suspect you have a problem
in your fs. Otherwise your kernel doesn't contain DSP Gateway.
Didn't you miss to do 'make uImage'? (Since sometimes I do. :))

BR,
Toshihiro Kobayashi