From: "Rajendra Nayak" <rnayak@ti.com>
To: linux-omap@vger.kernel.org
Cc: 'Kevin Hilman' <khilman@deeprootsystems.com>
Subject: [PATCH 06/16] OMAP3: INTC context save/restore
Date: Fri, 26 Sep 2008 17:48:20 +0530 [thread overview]
Message-ID: <01f701c91fd1$f6ef8cd0$LocalHost@wipultra1382> (raw)
This patch adds the Interrupt controller context
save/restore routines
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
arch/arm/mach-omap2/irq.c | 67 +++++++++++++++++++++++++++++++++
arch/arm/plat-omap/include/mach/irqs.h | 5 ++
2 files changed, 72 insertions(+)
Index: linux-omap-2.6/arch/arm/mach-omap2/irq.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/irq.c 2008-09-26 14:07:07.000000000 +0530
+++ linux-omap-2.6/arch/arm/mach-omap2/irq.c 2008-09-26 14:08:23.000000000 +0530
@@ -24,6 +24,10 @@
#define INTC_SYSCONFIG 0x0010
#define INTC_SYSSTATUS 0x0014
#define INTC_CONTROL 0x0048
+#define INTC_PROTECTION 0x004C
+#define INTC_IDLE 0x0050
+#define INTC_THRESHOLD 0x0068
+#define INTC_MIR0 0x0084
#define INTC_MIR_CLEAR0 0x0088
#define INTC_MIR_SET0 0x008c
#define INTC_PENDING_IRQ0 0x0098
@@ -48,6 +52,18 @@ static struct omap_irq_bank {
},
};
+/* Structure to save interrupt controller context */
+struct omap3_intc_regs {
+ u32 sysconfig;
+ u32 protection;
+ u32 idle;
+ u32 threshold;
+ u32 ilr[INTCPS_NR_IRQS];
+ u32 mir[INTCPS_NR_MIR_REGS];
+};
+
+static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
+
/* INTC bank register get/set */
static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
@@ -167,3 +183,54 @@ void __init omap_init_irq(void)
}
}
+#ifdef CONFIG_ARCH_OMAP3
+void omap3_intc_save_context(void)
+{
+ int ind = 0, i = 0;
+ for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
+ struct omap_irq_bank *bank = irq_banks + ind;
+ intc_context[ind].sysconfig =
+ intc_bank_read_reg(bank, INTC_SYSCONFIG);
+ intc_context[ind].protection =
+ intc_bank_read_reg(bank, INTC_PROTECTION);
+ intc_context[ind].idle =
+ intc_bank_read_reg(bank, INTC_IDLE);
+ intc_context[ind].threshold =
+ intc_bank_read_reg(bank, INTC_THRESHOLD);
+ for (i = 0; i < INTCPS_NR_IRQS; i++)
+ intc_context[ind].ilr[i] =
+ intc_bank_read_reg(bank, (0x100 + 0x4*ind));
+ for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
+ intc_context[ind].mir[i] =
+ intc_bank_read_reg(&irq_banks[0], INTC_MIR0 +
+ (0x20 * i));
+ }
+ /* MIRs are saved and restore with other PRCM registers */
+}
+
+void omap3_intc_restore_context(void)
+{
+ int ind = 0, i = 0;
+
+ for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
+ struct omap_irq_bank *bank = irq_banks + ind;
+ intc_bank_write_reg(intc_context[ind].sysconfig,
+ bank, INTC_SYSCONFIG);
+ intc_bank_write_reg(intc_context[ind].sysconfig,
+ bank, INTC_SYSCONFIG);
+ intc_bank_write_reg(intc_context[ind].protection,
+ bank, INTC_PROTECTION);
+ intc_bank_write_reg(intc_context[ind].idle,
+ bank, INTC_IDLE);
+ intc_bank_write_reg(intc_context[ind].threshold,
+ bank, INTC_THRESHOLD);
+ for (i = 0; i < INTCPS_NR_IRQS; i++)
+ intc_bank_write_reg(intc_context[ind].ilr[i],
+ bank, (0x100 + 0x4*ind));
+ for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
+ intc_bank_write_reg(intc_context[ind].mir[i],
+ &irq_banks[0], INTC_MIR0 + (0x20 * i));
+ }
+ /* MIRs are saved and restore with other PRCM registers */
+}
+#endif /* CONFIG_ARCH_OMAP3 */
Index: linux-omap-2.6/arch/arm/plat-omap/include/mach/irqs.h
===================================================================
--- linux-omap-2.6.orig/arch/arm/plat-omap/include/mach/irqs.h 2008-09-26 14:07:07.000000000 +0530
+++ linux-omap-2.6/arch/arm/plat-omap/include/mach/irqs.h 2008-09-26 14:07:34.000000000 +0530
@@ -367,9 +367,14 @@
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
+#define INTCPS_NR_MIR_REGS 3
+#define INTCPS_NR_IRQS 96
+
#ifndef __ASSEMBLY__
extern void omap_init_irq(void);
extern int omap_irq_pending(void);
+void omap3_intc_save_context(void);
+void omap3_intc_restore_context(void);
#endif
#include <mach/hardware.h>
reply other threads:[~2008-09-26 12:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='01f701c91fd1$f6ef8cd0$LocalHost@wipultra1382' \
--to=rnayak@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox