RE: Toolchain select

[Matthew Percival <matthew@capgo.com>]

G'Day,

> What version of u-boot are you using?  I use the u-boot-1.1.4 and
> u-boot-1.1.3, and my steps is,
> $tar xjvf u-boot-1.1.x
> $cd u-boot-1.1.x
> $make omap5912osk_config
> $make

	I am using 1.1.2; I have 1.1.4, but it does not link (I have not
investigated why yet, as it is pretty low priority).

	Your process is correct, so it is a little strange that the file does
not exist.  The command which creates the file (as called from the
Makefile) is:
	arm-linux-objcopy -O srec hello_world hello_world.srec 2>/dev/null
	I would suggest looking for where that command is used when you run it,
for there is likely a minor error being flagged at this point (run make
distclean first, then start afresh).

> And have you tried building the 2.6.15 kernel?

	Not yet: it is not on my current list of priorities.  I am running
2.6.14-omap1 at the moment.

	-- Matthew