From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Komal Shah" Subject: omap2430 kernel bootlog Date: Wed, 17 May 2006 04:06:00 -0700 Message-ID: <1147863960.2395.261639976@webmail.messagingengine.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-omap-open-source-bounces@linux.omap.com Errors-To: linux-omap-open-source-bounces@linux.omap.com To: linux-omap-open-source@linux.omap.com List-Id: linux-omap@vger.kernel.org Here is the minimal kernel conf. bootlog for omap2430. Before that... * I would prefer to have CONFIG_ARCH_OMAP242X and CONFIG_ARCH_OMAP243X instead of using CONFIG_ARCH_OMAP2420/OMAP2430 in my patch. But as of now there is no such facility in current omap-git tree. * Previous patch was just to trigger discussion on differences on base addresses introduced with omap2430 and how we can reuse existing omap24xx code with minimum #ifdefers. * I still need to work on ethernet support. I will update on it, once NFS mount works. * And to just people get started working on 2430 with omap-git tree, having hopefully long linux-2430 roadmaps :) -------------snip----------------- <5>Linux version 2.6.17-rc4-omap1-g9254deba-dirty (komal@everest) (gcc version 3.4.0 20040409 (CodeSourcery ARM Q1A 2004)) #270 Wed May 17 15:26:48 IST 2006 CPU: Some Random V6 Processor [4107b362] revision 2 (ARMv6TEJ) Machine: Generic OMAP24xx Memory policy: ECC disabled, Data cache writeback <7>On node 0 totalpages: 32768 <7> DMA zone: 32768 pages, LIFO batch:7 <6>OMAP2430 <6>SRAM: Mapped pa 0x4020f000 to va 0xd0000000 size: 0x1000 CPU0: D VIPT write-back cache CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets Built 1 zonelists <5>Kernel command line: console=ttyS0,115200n8 noinitrd root=/dev/nfs r w nfsroot=10.203.96.33:/pub/fs/oss,wsize=1024 ip=10.203.96.34:10.203.96.33: 255.255.254.0:omap2:eth0: <6>Clocking rate (Crystal/DPLL/MPU): 13.0/660/330 MHz <3>clock.c: Enable for dpll_ck without enable code <6>IRQ: Found an INTC at 0x480fe000 (revision 3.0) with 96 interrupts <6>Total of 96 interrupts on 1 active controller PID hash table entries: 1024 (order: 10, 4096 bytes) <6>OMAP2 GP timer (HW version 1.6) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) <6>Memory: 128MB = 128MB total <5>Memory: 128128KB available (1252K code, 324K data, 84K init) <7>Calibrating delay loop... 329.31 BogoMIPS (lpj=1646592) Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: ok <6>OMAP DMA hardware revision 3.0 <6>OMAP24xx GPIO hardware version 2.2 <3>omapdsp: unsupported omap architecture. <3>USB: No board-specific platform config found <4>NetWinder Floating Point Emulator V0.97 (double precision) <5>VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>io scheduler noop registered <6>io scheduler anticipatory registered (default) <6>io scheduler deadline registered <6>io scheduler cfq registered <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 Linux version 2.6.17-rc4-omap1-g9254deba-dirty (trilok@everest) (gcc version 3.4 .0 20040409 (CodeSourcery ARM Q1A 2004)) #270 Wed May 17 15:26:48 IST 2006 CPU: Some Random V6 Processor [4107b362] revision 2 (ARMv6TEJ) Machine: Generic OMAP24xx Memory policy: ECC disabled, Data cache writeback OMAP2430 SRAM: Mapped pa 0x4020f000 to va 0xd0000000 size: 0x1000 CPU0: D VIPT write-back cache CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets Built 1 zonelists Kernel command line: console=ttyS0,115200n8 noinitrd root=/dev/nfs rw n fsroot=10.203.96.33:/pub/fs/oss,wsize=1024 ip=10.203.96.34:10.203.96.33:255 .255.254.0:omap2:eth0: Clocking rate (Crystal/DPLL/MPU): 13.0/660/330 MHz clock.c: Enable for dpll_ck without enable code IRQ: Found an INTC at 0x480fe000 (revision 3.0) with 96 interrupts Total of 96 interrupts on 1 active controller PID hash table entries: 1024 (order: 10, 4096 bytes) OMAP2 GP timer (HW version 1.6) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 128128KB available (1252K code, 324K data, 84K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok OMAP DMA hardware revision 3.0 OMAP24xx GPIO hardware version 2.2 omapdsp: unsupported omap architecture. USB: No board-specific platform config found NetWinder Floating Point Emulator V0.97 (double precision) VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 <6>serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 <6>serial8250.0: ttyS2 at MMIO 0x4806e000 (irq = 74) is a ST16654 serial8250.0: ttyS2 at MMIO 0x4806e000 (irq = 74) is a ST16654 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize <6>loop: loaded (max 8 devices) loop: loaded (max 8 devices) VFS: No root yet, retrying to mount root on nfs (unknown-block(0,255)) -------------snip----------------- ---Komal Shah -- http://www.fastmail.fm - Email service worth paying for. Try it for free