[PATCH] ARM: OMAP: Remove IVA IRQ bank

Komal Shah
2006-08-28T12:34:43Z

[-- Attachment #1: Type: text/plain, Size: 304 bytes --]

Tony,

Attached the patch as per discussion on following thread:

http://linux.omap.com/pipermail/linux-omap-open-source/2006-August/007820.html

---Komal Shah
http://komalshah.blogspot.com

--
http://www.fastmail.fm - Access all of your messages and folders
wherever you are

[-- Attachment #2: 0001-ARM-OMAP-Remove-IVA-IRQ-bank.patch --]
[-- Type: application/octet-stream, Size: 1199 bytes --]

From nobody Mon Sep 17 00:00:00 2001
From: Komal Shah <komal_shah802003@yahoo.com>
Date: Mon, 28 Aug 2006 23:31:45 +0530
Subject: [PATCH] ARM: OMAP: Remove IVA IRQ bank

ARM11 can't access the IVA interrupt controller from
IVA slave port.

From Richard Woodruff:

"The 0x40000000 is an IVA-ARM7 local bus address.
The IVA-INTC is NOT accessible through the IVA-L3-Slave Port.
The current TRM does say this directly and indirectly in a few spots and
in figures."

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>

---

arch/arm/mach-omap2/irq.c | 12 ------------
1 files changed, 0 insertions(+), 12 deletions(-)

6bb574f0bff86c795e700aaf67c8a134e6a8b4d1
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index dfc3b35..1ed2fff 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -41,18 +41,6 @@ static struct omap_irq_bank {
.nr_irqs = 96,
}, {
/* XXX: DSP INTC */
-
-#if 0
- /*
- * Commented out for now until we fix the IVA clocking
- */
-#ifdef CONFIG_ARCH_OMAP2420
- }, {
- /* IVA INTC (2420 only) */
- .base_reg = OMAP24XX_IVA_INTC_BASE,
- .nr_irqs = 16, /* Actually 32, but only 16 are used */
-#endif
-#endif
}
};

--
1.3.3

[-- Attachment #3: Type: text/plain, Size: 0 bytes --]