* [PATCH] dmtimer.c omap1 register fix...
@ 2006-12-08 0:52 Matthew Percival
2006-12-21 22:52 ` Tony Lindgren
0 siblings, 1 reply; 4+ messages in thread
From: Matthew Percival @ 2006-12-08 0:52 UTC (permalink / raw)
To: Linux OMAP Open Source
[-- Attachment #1: Type: text/plain, Size: 230 bytes --]
G'Day,
When I went to use dmtimer7 it did not seem to work. I noticed that
the base addresses for dmtimers 7 and 8 were set wrong. A simple patch
to correct a small error. Confirmed to fix the problem on an OSK.
-- Matthew
[-- Attachment #2: dmtimer.c.patch --]
[-- Type: text/x-patch, Size: 599 bytes --]
--- a/arch/arm/plat-omap/dmtimer.c 2006-12-06 11:40:06.000000000 +1100
+++ b/arch/arm/plat-omap/dmtimer.c 2006-12-08 11:47:33.000000000 +1100
@@ -90,8 +90,8 @@
{ .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
{ .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
{ .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
- { .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
- { .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
+ { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
+ { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
};
#elif defined(CONFIG_ARCH_OMAP2)
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] dmtimer.c omap1 register fix...
2006-12-08 0:52 [PATCH] dmtimer.c omap1 register fix Matthew Percival
@ 2006-12-21 22:52 ` Tony Lindgren
2006-12-21 23:13 ` Matthew Percival
0 siblings, 1 reply; 4+ messages in thread
From: Tony Lindgren @ 2006-12-21 22:52 UTC (permalink / raw)
To: Matthew Percival; +Cc: Linux OMAP Open Source
* Matthew Percival <matthew@capgo.com> [061207 16:54]:
> G'Day,
>
> When I went to use dmtimer7 it did not seem to work. I noticed that
> the base addresses for dmtimers 7 and 8 were set wrong. A simple patch
> to correct a small error. Confirmed to fix the problem on an OSK.
>
> -- Matthew
> --- a/arch/arm/plat-omap/dmtimer.c 2006-12-06 11:40:06.000000000 +1100
> +++ b/arch/arm/plat-omap/dmtimer.c 2006-12-08 11:47:33.000000000 +1100
> @@ -90,8 +90,8 @@
> { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
> { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
> { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
> - { .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
> - { .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
> + { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
> + { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
> };
>
> #elif defined(CONFIG_ARCH_OMAP2)
Good catch, can you please reply to this thread with your Signed-off-by?
Tony
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] dmtimer.c omap1 register fix...
2006-12-21 22:52 ` Tony Lindgren
@ 2006-12-21 23:13 ` Matthew Percival
2006-12-21 23:40 ` Tony Lindgren
0 siblings, 1 reply; 4+ messages in thread
From: Matthew Percival @ 2006-12-21 23:13 UTC (permalink / raw)
To: Linux OMAP Open Source
On Thu, 2006-12-21 at 14:52 -0800, Tony Lindgren wrote:
> * Matthew Percival <matthew@capgo.com> [061207 16:54]:
> > G'Day,
> >
> > When I went to use dmtimer7 it did not seem to work. I noticed that
> > the base addresses for dmtimers 7 and 8 were set wrong. A simple patch
> > to correct a small error. Confirmed to fix the problem on an OSK.
> >
> > -- Matthew
>
> > --- a/arch/arm/plat-omap/dmtimer.c 2006-12-06 11:40:06.000000000 +1100
> > +++ b/arch/arm/plat-omap/dmtimer.c 2006-12-08 11:47:33.000000000 +1100
> > @@ -90,8 +90,8 @@
> > { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
> > { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
> > { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
> > - { .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
> > - { .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
> > + { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
> > + { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
> > };
> >
> > #elif defined(CONFIG_ARCH_OMAP2)
>
> Good catch, can you please reply to this thread with your Signed-off-by?
>
> Tony
Signed-off-by: Matthew Percival <matthew at capgo.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] dmtimer.c omap1 register fix...
2006-12-21 23:13 ` Matthew Percival
@ 2006-12-21 23:40 ` Tony Lindgren
0 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2006-12-21 23:40 UTC (permalink / raw)
To: Matthew Percival; +Cc: Linux OMAP Open Source
* Matthew Percival <matthew@capgo.com> [061221 15:14]:
> On Thu, 2006-12-21 at 14:52 -0800, Tony Lindgren wrote:
> > * Matthew Percival <matthew@capgo.com> [061207 16:54]:
> > > G'Day,
> > >
> > > When I went to use dmtimer7 it did not seem to work. I noticed that
> > > the base addresses for dmtimers 7 and 8 were set wrong. A simple patch
> > > to correct a small error. Confirmed to fix the problem on an OSK.
> > >
> > > -- Matthew
> >
> > > --- a/arch/arm/plat-omap/dmtimer.c 2006-12-06 11:40:06.000000000 +1100
> > > +++ b/arch/arm/plat-omap/dmtimer.c 2006-12-08 11:47:33.000000000 +1100
> > > @@ -90,8 +90,8 @@
> > > { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
> > > { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
> > > { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
> > > - { .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
> > > - { .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
> > > + { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
> > > + { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
> > > };
> > >
> > > #elif defined(CONFIG_ARCH_OMAP2)
> >
> > Good catch, can you please reply to this thread with your Signed-off-by?
> >
> > Tony
>
> Signed-off-by: Matthew Percival <matthew at capgo.com>
Thanks, pushing today.
Tony
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-12-21 23:40 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-08 0:52 [PATCH] dmtimer.c omap1 register fix Matthew Percival
2006-12-21 22:52 ` Tony Lindgren
2006-12-21 23:13 ` Matthew Percival
2006-12-21 23:40 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox