From: Felipe Balbi <felipe.lima@indt.org.br>
To: ext Dirk Behme <dirk.behme@googlemail.com>,
Ilias Biris <ilias.biris@indt.org.br>
Cc: linux-omap-open-source@linux.omap.com
Subject: Re: innovator_ps2 broken
Date: Thu, 04 Jan 2007 15:20:28 -0400 [thread overview]
Message-ID: <1167938428.19325.5.camel@balbi> (raw)
In-Reply-To: <459D34C9.8060405@googlemail.com>
Hello all,
> CC [M] drivers/input/keyboard/innovator_ps2.o
> drivers/input/keyboard/innovator_ps2.c: In function
> 'innovator_kbd_init':
> drivers/input/keyboard/innovator_ps2.c:1225: warning:
> implicit declaration of function 'init_input_dev'
> WARNING: "init_input_dev"
> [drivers/input/keyboard/innovator_ps2.ko] undefined!
This patch makes this module compile again.
== CUT HERE ==
Make drivers/input/keyboard/innovator_ps2.c work again.
init_input_dev() is not used anymore, use input_allocate_dev() instead.
Signed-off-by Felipe Balbi <felipe.lima@indt.org.br>
---
Index: linux-omap-2.6-dev/drivers/input/keyboard/innovator_ps2.c
===================================================================
--- linux-omap-2.6-dev.orig/drivers/input/keyboard/innovator_ps2.c
+++ linux-omap-2.6-dev/drivers/input/keyboard/innovator_ps2.c
@@ -338,3 +338,3 @@ static struct innovator_hid_dev *hid;
struct innovator_hid_dev {
- struct input_dev mouse, keyboard;
+ struct input_dev *mouse, *keyboard;
int open;
@@ -923,2 +923,4 @@ process_pointing_report(struct innovator
int x, y, btn;
+ hid->keyboard = input_allocate_device();
+ hid->mouse = input_allocate_device();
@@ -939,10 +941,10 @@ process_pointing_report(struct innovator
- input_report_key(&hid->mouse,
+ input_report_key(hid->mouse,
BTN_LEFT, buffer[1] & (1<<0));
- input_report_key(&hid->mouse,
+ input_report_key(hid->mouse,
BTN_RIGHT, buffer[1] & (1<<1));
- input_report_key(&hid->mouse,
+ input_report_key(hid->mouse,
BTN_MIDDLE, buffer[1] & (1<<2));
- input_report_rel(&hid->mouse, REL_X, x);
- input_report_rel(&hid->mouse, REL_Y, y);
+ input_report_rel(hid->mouse, REL_X, x);
+ input_report_rel(hid->mouse, REL_Y, y);
} else {
@@ -958,5 +960,5 @@ process_pointing_report(struct innovator
- input_report_key(&hid->mouse, BTN_LEFT, btn);
- input_report_abs(&hid->mouse, ABS_X, x);
- input_report_abs(&hid->mouse, ABS_Y, y);
+ input_report_key(hid->mouse, BTN_LEFT, btn);
+ input_report_abs(hid->mouse, ABS_X, x);
+ input_report_abs(hid->mouse, ABS_Y, y);
prev_x = x;
@@ -965,3 +967,3 @@ process_pointing_report(struct innovator
}
- input_sync(&hid->mouse);
+ input_sync(hid->mouse);
dbg("HID X: %d Y: %d Functions: %x\n", x, y, buffer[1]);
@@ -1015,11 +1017,11 @@ handle_print_scr(int up)
if (up) {
- input_report_key(&hid->keyboard, 0xe0, 1);
- input_report_key(&hid->keyboard, 0xb7, 1);
- input_report_key(&hid->keyboard, 0xe0, 1);
- input_report_key(&hid->keyboard, 0xaa, 1);
+ input_report_key(hid->keyboard, 0xe0, 1);
+ input_report_key(hid->keyboard, 0xb7, 1);
+ input_report_key(hid->keyboard, 0xe0, 1);
+ input_report_key(hid->keyboard, 0xaa, 1);
} else {
- input_report_key(&hid->keyboard, 0xe0, 0);
- input_report_key(&hid->keyboard, 0x2a, 0);
- input_report_key(&hid->keyboard, 0xe0, 0);
- input_report_key(&hid->keyboard, 0x37, 0);
+ input_report_key(hid->keyboard, 0xe0, 0);
+ input_report_key(hid->keyboard, 0x2a, 0);
+ input_report_key(hid->keyboard, 0xe0, 0);
+ input_report_key(hid->keyboard, 0x37, 0);
}
@@ -1030,8 +1032,8 @@ handle_pause(void)
{
- input_report_key(&hid->keyboard, 0xe1, 0);
- input_report_key(&hid->keyboard, 0x1d, 0);
- input_report_key(&hid->keyboard, 0x45, 0);
- input_report_key(&hid->keyboard, 0xe1, 0);
- input_report_key(&hid->keyboard, 0x9d, 0);
- input_report_key(&hid->keyboard, 0xc5, 0);
+ input_report_key(hid->keyboard, 0xe1, 0);
+ input_report_key(hid->keyboard, 0x1d, 0);
+ input_report_key(hid->keyboard, 0x45, 0);
+ input_report_key(hid->keyboard, 0xe1, 0);
+ input_report_key(hid->keyboard, 0x9d, 0);
+ input_report_key(hid->keyboard, 0xc5, 0);
}
@@ -1044,2 +1046,4 @@ process_keyboard_report(struct innovator
int is_e0 = 0;
+ hid->keyboard = input_allocate_device();
+ hid->mouse = input_allocate_device();
@@ -1067,6 +1071,6 @@ process_keyboard_report(struct innovator
if (is_e0) {
- input_report_key(&hid->keyboard, 0xe0, !up);
+ input_report_key(hid->keyboard, 0xe0, !up);
}
- input_report_key(&hid->keyboard, usar2scancode[ch], !up);
- input_sync(&hid->keyboard);
+ input_report_key(hid->keyboard, usar2scancode[ch], !up);
+ input_sync(hid->keyboard);
}
@@ -1210,33 +1214,34 @@ innovator_kbd_init(void)
memset(hid, 0, sizeof(struct innovator_hid_dev));
- hid->mouse.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- hid->mouse.keybit[LONG(BTN_MOUSE)] =
+ hid->mouse = input_allocate_device();
+ hid->mouse->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ hid->mouse->keybit[LONG(BTN_MOUSE)] =
BIT(BTN_LEFT) | BIT(BTN_RIGHT) |
BIT(BTN_MIDDLE) | BIT(BTN_TOUCH);
- hid->mouse.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- hid->mouse.private = hid;
- hid->mouse.open = innovator_hid_open;
- hid->mouse.close = innovator_hid_close;
- hid->mouse.name = "innovator_mouse";
- hid->mouse.id.bustype = 0;
- hid->mouse.id.vendor = 0;
- hid->mouse.id.product = 0;
- hid->mouse.id.version = 0;
- hid->keyboard.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- init_input_dev(&hid->keyboard);
- hid->keyboard.keycodesize = sizeof(unsigned char);
- hid->keyboard.keycodemax = ARRAY_SIZE(usar2scancode);
+ hid->mouse->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ hid->mouse->private = hid;
+ hid->mouse->open = innovator_hid_open;
+ hid->mouse->close = innovator_hid_close;
+ hid->mouse->name = "innovator_mouse";
+ hid->mouse->id.bustype = 0;
+ hid->mouse->id.vendor = 0;
+ hid->mouse->id.product = 0;
+ hid->mouse->id.version = 0;
+ hid->keyboard = input_allocate_device();
+ hid->keyboard->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ hid->keyboard->keycodesize = sizeof(unsigned char);
+ hid->keyboard->keycodemax = ARRAY_SIZE(usar2scancode);
for(i = 0; i < 128; i++)
- set_bit(usar2scancode[i], hid->keyboard.keybit);
- hid->keyboard.private = hid;
- hid->keyboard.open = innovator_hid_open;
- hid->keyboard.close = innovator_hid_close;
- hid->keyboard.name = "innovator_keyboard";
- hid->keyboard.id.bustype = 0;
- hid->keyboard.id.vendor = 0;
- hid->keyboard.id.product = 0;
- hid->keyboard.id.version = 0;
- input_register_device(&hid->mouse);
- input_register_device(&hid->keyboard);
- innovator_hid_open(&hid->mouse);
- innovator_hid_open(&hid->keyboard);
+ set_bit(usar2scancode[i], hid->keyboard->keybit);
+ hid->keyboard->private = hid;
+ hid->keyboard->open = innovator_hid_open;
+ hid->keyboard->close = innovator_hid_close;
+ hid->keyboard->name = "innovator_keyboard";
+ hid->keyboard->id.bustype = 0;
+ hid->keyboard->id.vendor = 0;
+ hid->keyboard->id.product = 0;
+ hid->keyboard->id.version = 0;
+ input_register_device(hid->mouse);
+ input_register_device(hid->keyboard);
+ innovator_hid_open(hid->mouse);
+ innovator_hid_open(hid->keyboard);
@@ -1259,4 +1264,4 @@ innovator_kbd_exit(void)
{
- input_unregister_device(&hid->mouse);
- input_unregister_device(&hid->keyboard);
+ input_unregister_device(hid->mouse);
+ input_unregister_device(hid->keyboard);
free_irq(OMAP1510_INT_FPGA_ATN, hid);
--
Best Regards,
Felipe Balbi
felipe.lima@indt.org.br
Nokia Institute of Technology - INdT
Kernel Developers Team
+55 92 8127 0839
next prev parent reply other threads:[~2007-01-04 19:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-04 17:09 innovator_ps2 broken Dirk Behme
2007-01-04 19:20 ` Felipe Balbi [this message]
2007-01-09 23:28 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1167938428.19325.5.camel@balbi \
--to=felipe.lima@indt.org.br \
--cc=dirk.behme@googlemail.com \
--cc=ilias.biris@indt.org.br \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox