From: Tony Lindgren <tony@atomide.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 16/52] musb_hdrc: Search and replace bEnd0Stage with ep0_stage
Date: Mon, 13 Aug 2007 06:48:51 -0700 [thread overview]
Message-ID: <1187013007355-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <11870130052666-git-send-email-tony@atomide.com>
Search and replace bEnd0Stage with ep0_stage
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/usb/musb/musb_host.c | 20 ++++++++++----------
drivers/usb/musb/musbdefs.h | 2 +-
drivers/usb/musb/plat_uds.c | 4 ++--
3 files changed, 13 insertions(+), 13 deletions(-)
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -189,7 +189,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
/* control transfers always start with SETUP */
is_in = 0;
hw_ep->out_qh = qh;
- musb->bEnd0Stage = MGC_END0_START;
+ musb->ep0_stage = MGC_END0_START;
pBuffer = urb->setup_packet;
dwLength = 8;
break;
@@ -952,7 +952,7 @@ static int musb_h_ep0_continue(struct musb *musb,
struct musb_qh *qh = hw_ep->in_qh;
struct usb_ctrlrequest *pRequest;
- switch (musb->bEnd0Stage) {
+ switch (musb->ep0_stage) {
case MGC_END0_IN:
pFifoDest = pUrb->transfer_buffer + pUrb->actual_length;
fifo_count = min(len, ((u16) (pUrb->transfer_buffer_length
@@ -979,12 +979,12 @@ static int musb_h_ep0_continue(struct musb *musb,
break;
} else if (pRequest->bRequestType & USB_DIR_IN) {
DBG(4, "start IN-DATA\n");
- musb->bEnd0Stage = MGC_END0_IN;
+ musb->ep0_stage = MGC_END0_IN;
bMore = TRUE;
break;
} else {
DBG(4, "start OUT-DATA\n");
- musb->bEnd0Stage = MGC_END0_OUT;
+ musb->ep0_stage = MGC_END0_OUT;
bMore = TRUE;
}
/* FALLTHROUGH */
@@ -1005,7 +1005,7 @@ static int musb_h_ep0_continue(struct musb *musb,
}
break;
default:
- ERR("bogus ep0 stage %d\n", musb->bEnd0Stage);
+ ERR("bogus ep0 stage %d\n", musb->ep0_stage);
break;
}
@@ -1040,10 +1040,10 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
: 0;
DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
- wCsrVal, qh, len, pUrb, musb->bEnd0Stage);
+ wCsrVal, qh, len, pUrb, musb->ep0_stage);
/* if we just did status stage, we are done */
- if (MGC_END0_STATUS == musb->bEnd0Stage) {
+ if (MGC_END0_STATUS == musb->ep0_stage) {
retval = IRQ_HANDLED;
bComplete = TRUE;
}
@@ -1114,7 +1114,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
/* call common logic and prepare response */
if (musb_h_ep0_continue(musb, len, pUrb)) {
/* more packets required */
- wCsrVal = (MGC_END0_IN == musb->bEnd0Stage)
+ wCsrVal = (MGC_END0_IN == musb->ep0_stage)
? MGC_M_CSR0_H_REQPKT : MGC_M_CSR0_TXPKTRDY;
} else {
/* data transfer complete; perform status phase */
@@ -1127,7 +1127,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
| MGC_M_CSR0_TXPKTRDY;
/* flag status stage */
- musb->bEnd0Stage = MGC_END0_STATUS;
+ musb->ep0_stage = MGC_END0_STATUS;
DBG(5, "ep0 STATUS, csr %04x\n", wCsrVal);
@@ -1135,7 +1135,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
musb_writew(epio, MGC_O_HDRC_CSR0, wCsrVal);
retval = IRQ_HANDLED;
} else
- musb->bEnd0Stage = MGC_END0_IDLE;
+ musb->ep0_stage = MGC_END0_IDLE;
/* call completion handler if done */
if (bComplete)
--- a/drivers/usb/musb/musbdefs.h
+++ b/drivers/usb/musb/musbdefs.h
@@ -355,7 +355,7 @@ struct musb {
u32 port1_status;
unsigned long rh_timer;
- enum musb_h_ep0_state bEnd0Stage;
+ enum musb_h_ep0_state ep0_stage;
/* bulk traffic normally dedicates endpoint hardware, and each
* direction has its own ring of host side endpoints.
--- a/drivers/usb/musb/plat_uds.c
+++ b/drivers/usb/musb/plat_uds.c
@@ -467,7 +467,7 @@ static irqreturn_t musb_stage0_irq(struct musb * musb, u8 bIntrUSB,
* a_wait_vrise_tmout triggers VBUS_ERROR transitions
*/
musb_writeb(mbase, MGC_O_HDRC_DEVCTL, MGC_M_DEVCTL_SESSION);
- musb->bEnd0Stage = MGC_END0_START;
+ musb->ep0_stage = MGC_END0_START;
musb->xceiv.state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
musb_set_vbus(musb, 1);
@@ -550,7 +550,7 @@ static irqreturn_t musb_stage0_irq(struct musb * musb, u8 bIntrUSB,
musb->is_active = 1;
set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- musb->bEnd0Stage = MGC_END0_START;
+ musb->ep0_stage = MGC_END0_START;
#ifdef CONFIG_USB_MUSB_OTG
/* flush endpoints when transitioning from Device Mode */
--
1.5.2.3
next prev parent reply other threads:[~2007-08-13 13:48 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-13 13:48 (no subject) Tony Lindgren
2007-08-13 13:48 ` [PATCH 1/52] musb_hdrc: Search and replace pThis with musb Tony Lindgren
2007-08-13 13:48 ` [PATCH 2/52] musb_hdrc: Search and replace pEndPt with hw_ep Tony Lindgren
2007-08-13 13:48 ` [PATCH 3/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_ep Tony Lindgren
2007-08-13 13:48 ` [PATCH 4/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_hw_ep Tony Lindgren
2007-08-13 13:48 ` [PATCH 5/52] musb_hdrc: Search and replace pRegs with mregs Tony Lindgren
2007-08-13 13:48 ` [PATCH 6/52] musb_hdrc: Search and replace pBase with mbase Tony Lindgren
2007-08-13 13:48 ` [PATCH 7/52] musb_hdrc: Search and replace pSource with src Tony Lindgren
2007-08-13 13:48 ` [PATCH 8/52] musb_hdrc: Search and replace pDest with dst Tony Lindgren
2007-08-13 13:48 ` [PATCH 9/52] musb_hdrc: Search and replace dwCount with len Tony Lindgren
2007-08-13 13:48 ` [PATCH 10/52] musb_hdrc: Search and replace wFifoCount with fifo_count Tony Lindgren
2007-08-13 13:48 ` [PATCH 11/52] musb_hdrc: Search and replace wCount with len Tony Lindgren
2007-08-13 13:48 ` [PATCH 12/52] musb_hdrc: Search and replace bLocalEnd with epnum Tony Lindgren
2007-08-13 13:48 ` [PATCH 13/52] musb_hdrc: Search and replace aLocalEnd with endpoints Tony Lindgren
2007-08-13 13:48 ` [PATCH 14/52] musb_hdrc: Search and replace bEndCount with nr_endpoints Tony Lindgren
2007-08-13 13:48 ` [PATCH 15/52] musb_hdrc: Search and replace bEndNumber with current_epnum Tony Lindgren
2007-08-13 13:48 ` Tony Lindgren [this message]
2007-08-13 13:48 ` [PATCH 17/52] musb_hdrc: Search and replace bEnd with epnum Tony Lindgren
2007-08-13 13:48 ` [PATCH 18/52] musb_hdrc: Search and replace Lock with lock Tony Lindgren
2007-08-13 13:48 ` [PATCH 19/52] musb_hdrc: Search and replace MGC_SelectEnd with musb_ep_select Tony Lindgren
2007-08-13 13:48 ` [PATCH 20/52] musb_hdrc: Search and replace _pthis with _musb Tony Lindgren
2007-08-13 13:48 ` [PATCH 21/52] musb_hdrc: Search and replace bIsHost with is_host Tony Lindgren
2007-08-13 13:48 ` [PATCH 22/52] musb_hdrc: Get rid of old unused MUSB_EpFifoDescriptor Tony Lindgren
2007-08-13 13:48 ` [PATCH 23/52] musb_hdrc: Search and replace bIsSharedFifo with is_shared_fifo Tony Lindgren
2007-08-13 13:48 ` [PATCH 24/52] musb_hdrc: Search and replace wMaxPacketSizeTx with max_packet_sz_tx Tony Lindgren
2007-08-13 13:49 ` [PATCH 25/52] musb_hdrc: Search and replace wMaxPacketSizeRx with max_packet_sz_rx Tony Lindgren
2007-08-13 13:49 ` [PATCH 26/52] musb_hdrc: Search and replace pDmaController with dma_controller Tony Lindgren
2007-08-13 13:49 ` [PATCH 27/52] musb_hdrc: Search and replace bIsMultipoint with is_multipoint Tony Lindgren
2007-08-13 13:49 ` [PATCH 28/52] musb_hdrc: Search and replace bIgnoreDisconnect with ignore_disconnect Tony Lindgren
2007-08-13 13:49 ` [PATCH 29/52] musb_hdrc: Search and replace bBulkSplit with bulk_split Tony Lindgren
2007-08-13 13:49 ` [PATCH 30/52] musb_hdrc: Search and replace bBulkCombine with bulk_combine Tony Lindgren
2007-08-13 13:49 ` [PATCH 31/52] musb_hdrc: Search and replace bAddress with address Tony Lindgren
2007-08-13 13:49 ` [PATCH 32/52] musb_hdrc: Search and replace bTestModeValue with test_mode_nr Tony Lindgren
2007-08-13 13:49 ` [PATCH 33/52] musb_hdrc: Search and replace bTestMode with test_mode Tony Lindgren
2007-08-13 13:49 ` [PATCH 34/52] musb_hdrc: Search and replace pGadgetDriver with gadget_driver Tony Lindgren
2007-08-13 13:49 ` [PATCH 35/52] musb_hdrc: Search and replace bDelayPortPowerOff with delay_port_power_off Tony Lindgren
2007-08-13 13:49 ` [PATCH 36/52] musb_hdrc: Search and replace pProcEntry with proc_entry Tony Lindgren
2007-08-13 13:49 ` [PATCH 37/52] musb_hdrc: Search and replace pPrivateData with private_data Tony Lindgren
2007-08-13 13:49 ` [PATCH 38/52] musb_hdrc: Search and replace dwMaxLength with max_len Tony Lindgren
2007-08-13 13:49 ` [PATCH 39/52] musb_hdrc: Search and replace dwActualLength with actual_len Tony Lindgren
2007-08-13 13:49 ` [PATCH 40/52] musb_hdrc: Search and replace bStatus with status Tony Lindgren
2007-08-13 13:49 ` [PATCH 41/52] musb_hdrc: Search and replace bDesiredMode with desired_mode Tony Lindgren
2007-08-13 13:49 ` [PATCH 42/52] musb_hdrc: Search and replace bMode with mode Tony Lindgren
2007-08-13 13:49 ` [PATCH 43/52] musb_hdrc: Search and replace MGC_pfDmaProgramChannel with dma_program_channel Tony Lindgren
2007-08-13 13:49 ` [PATCH 44/52] musb_hdrc: Search and replace pControlRequest with ctrlrequest Tony Lindgren
2007-08-13 13:49 ` [PATCH 45/52] musb_hdrc: Search and replace bResult with result Tony Lindgren
2007-08-13 13:49 ` [PATCH 46/52] musb_hdrc: Search and replace bSetAddress with set_address Tony Lindgren
2007-08-13 13:49 ` [PATCH 47/52] musb_hdrc: Search and replace bRecip with recip Tony Lindgren
2007-08-13 13:49 ` [PATCH 48/52] musb_hdrc: Search and replace pRequest with request Tony Lindgren
2007-08-13 13:49 ` [PATCH 49/52] musb_hdrc: Search and replace wCsrVal with csr Tony Lindgren
2007-08-13 13:49 ` [PATCH 50/52] musb_hdrc: Search and replace bTx with tx Tony Lindgren
2007-08-13 13:49 ` [PATCH 51/52] musb_hdrc: Search and replace wPacketSize with packet_sz Tony Lindgren
2007-08-13 13:49 ` [PATCH 52/52] musb_hdrc: Search and replace channelNum with chnum Tony Lindgren
2007-08-14 9:23 ` [PATCH 4/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_hw_ep Tony Lindgren
2007-08-13 13:58 ` (no subject) Felipe Balbi
2007-08-14 8:06 ` musb CaMeLcAsEnOmOre (was: (no subject)) David Brownell
2007-08-14 8:55 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1187013007355-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox