From: Tony Lindgren <tony@atomide.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 40/52] musb_hdrc: Search and replace bStatus with status
Date: Mon, 13 Aug 2007 06:49:15 -0700 [thread overview]
Message-ID: <11870130771666-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <11870130741506-git-send-email-tony@atomide.com>
Search and replace bStatus with status
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/usb/musb/cppi_dma.c | 22 +++++++++++-----------
drivers/usb/musb/dma.h | 6 +++---
drivers/usb/musb/musb_gadget.c | 4 ++--
drivers/usb/musb/musb_host.c | 6 +++---
drivers/usb/musb/musbhsdma.c | 18 +++++++++---------
drivers/usb/musb/tusb6010_omap.c | 16 ++++++++--------
6 files changed, 36 insertions(+), 36 deletions(-)
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -99,7 +99,7 @@ static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
c->activeQueueHead = NULL;
c->activeQueueTail = NULL;
c->lastHwBDProcessed = NULL;
- c->Channel.bStatus = MGC_DMA_STATUS_UNKNOWN;
+ c->Channel.status = MGC_DMA_STATUS_UNKNOWN;
c->pController = cppi;
c->bLastModeRndis = 0;
c->Channel.private_data = c;
@@ -124,7 +124,7 @@ static void cppi_pool_free(struct cppi_channel *c)
struct cppi_descriptor *bd;
(void) cppi_channel_abort(&c->Channel);
- c->Channel.bStatus = MGC_DMA_STATUS_UNKNOWN;
+ c->Channel.status = MGC_DMA_STATUS_UNKNOWN;
c->pController = NULL;
/* free all its bds */
@@ -322,7 +322,7 @@ cppi_channel_allocate(struct dma_controller *c,
DBG(1, "re-allocating DMA%d %cX channel %p\n",
chNum, bTransmit ? 'T' : 'R', otgCh);
otgCh->hw_ep = ep;
- otgCh->Channel.bStatus = MGC_DMA_STATUS_FREE;
+ otgCh->Channel.status = MGC_DMA_STATUS_FREE;
DBG(4, "Allocate CPPI%d %cX\n", chNum, bTransmit ? 'T' : 'R');
otgCh->Channel.private_data = otgCh;
@@ -348,7 +348,7 @@ static void cppi_channel_release(struct dma_channel *channel)
/* for now, leave its cppi IRQ enabled (we won't trigger it) */
c->hw_ep = NULL;
- channel->bStatus = MGC_DMA_STATUS_UNKNOWN;
+ channel->status = MGC_DMA_STATUS_UNKNOWN;
}
/* Context: controller irqlocked */
@@ -957,7 +957,7 @@ static int cppi_channel_program(struct dma_channel *pChannel,
struct cppi *pController = otgChannel->pController;
struct musb *musb = pController->musb;
- switch (pChannel->bStatus) {
+ switch (pChannel->status) {
case MGC_DMA_STATUS_BUS_ABORT:
case MGC_DMA_STATUS_CORE_ABORT:
/* fault irq handler should have handled cleanup */
@@ -981,7 +981,7 @@ static int cppi_channel_program(struct dma_channel *pChannel,
break;
}
- pChannel->bStatus = MGC_DMA_STATUS_BUSY;
+ pChannel->status = MGC_DMA_STATUS_BUSY;
/* set transfer parameters, then queue up its first segment */
otgChannel->startAddr = dma_addr;
@@ -1224,7 +1224,7 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx)
>= txChannel->transferSize) {
txChannel->activeQueueHead = NULL;
txChannel->activeQueueTail = NULL;
- txChannel->Channel.bStatus =
+ txChannel->Channel.status =
MGC_DMA_STATUS_FREE;
hw_ep = txChannel->hw_ep;
@@ -1288,7 +1288,7 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx)
}
/* all segments completed! */
- rxChannel->Channel.bStatus = MGC_DMA_STATUS_FREE;
+ rxChannel->Channel.status = MGC_DMA_STATUS_FREE;
hw_ep = rxChannel->hw_ep;
@@ -1375,7 +1375,7 @@ static int cppi_channel_abort(struct dma_channel *channel)
pController = otgCh->pController;
chNum = otgCh->chNo;
- switch (channel->bStatus) {
+ switch (channel->status) {
case MGC_DMA_STATUS_BUS_ABORT:
case MGC_DMA_STATUS_CORE_ABORT:
/* from RX or TX fault irq handler */
@@ -1515,7 +1515,7 @@ static int cppi_channel_abort(struct dma_channel *channel)
* refers to an entire "DMA packet" not just emptying the
* current fifo; most segments need multiple usb packets.
*/
- if (channel->bStatus == MGC_DMA_STATUS_BUSY)
+ if (channel->status == MGC_DMA_STATUS_BUSY)
udelay(50);
/* scan the current list, reporting any data that was
@@ -1552,7 +1552,7 @@ static int cppi_channel_abort(struct dma_channel *channel)
}
}
- channel->bStatus = MGC_DMA_STATUS_FREE;
+ channel->status = MGC_DMA_STATUS_FREE;
otgCh->startAddr = 0;
otgCh->currOffset = 0;
otgCh->transferSize = 0;
--- a/drivers/usb/musb/dma.h
+++ b/drivers/usb/musb/dma.h
@@ -104,7 +104,7 @@ struct dma_controller;
* @wMaxLength: the maximum number of bytes the channel can move in one
* transaction (typically representing many USB maximum-sized packets)
* @actual_len: how many bytes have been transferred
- * @bStatus: current channel status (updated e.g. on interrupt)
+ * @status: current channel status (updated e.g. on interrupt)
* @bDesiredMode: TRUE if mode 1 is desired; FALSE if mode 0 is desired
*
* channels are associated with an endpoint for the duration of at least
@@ -115,7 +115,7 @@ struct dma_channel {
// FIXME not void* private_data, but a dma_controller *
size_t max_len;
size_t actual_len;
- enum dma_channel_status bStatus;
+ enum dma_channel_status status;
u8 bDesiredMode;
};
@@ -151,7 +151,7 @@ typedef int (*MGC_pfDmaProgramChannel) (
static inline enum dma_channel_status
dma_channel_status(struct dma_channel *c)
{
- return (is_dma_capable() && c) ? c->bStatus : MGC_DMA_STATUS_UNKNOWN;
+ return (is_dma_capable() && c) ? c->status : MGC_DMA_STATUS_UNKNOWN;
}
/**
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -427,7 +427,7 @@ void musb_g_tx(struct musb *musb, u8 epnum)
wCsrVal &= ~MGC_M_TXCSR_P_SENTSTALL;
musb_writew(epio, MGC_O_HDRC_TXCSR, wCsrVal);
if (dma_channel_status(dma) == MGC_DMA_STATUS_BUSY) {
- dma->bStatus = MGC_DMA_STATUS_CORE_ABORT;
+ dma->status = MGC_DMA_STATUS_CORE_ABORT;
musb->dma_controller->channel_abort(dma);
}
@@ -753,7 +753,7 @@ void musb_g_rx(struct musb *musb, u8 epnum)
if (wCsrVal & MGC_M_RXCSR_P_SENTSTALL) {
if (dma_channel_status(dma) == MGC_DMA_STATUS_BUSY) {
- dma->bStatus = MGC_DMA_STATUS_CORE_ABORT;
+ dma->status = MGC_DMA_STATUS_CORE_ABORT;
(void) musb->dma_controller->channel_abort(dma);
pRequest->actual += musb_ep->dma->actual_len;
}
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1226,7 +1226,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
if (status) {
if (dma_channel_status(dma) == MGC_DMA_STATUS_BUSY) {
- dma->bStatus = MGC_DMA_STATUS_CORE_ABORT;
+ dma->status = MGC_DMA_STATUS_CORE_ABORT;
(void) musb->dma_controller->channel_abort(dma);
}
@@ -1460,7 +1460,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
if (status) {
/* clean up dma and collect transfer count */
if (dma_channel_status(dma) == MGC_DMA_STATUS_BUSY) {
- dma->bStatus = MGC_DMA_STATUS_CORE_ABORT;
+ dma->status = MGC_DMA_STATUS_CORE_ABORT;
(void) musb->dma_controller->channel_abort(dma);
xfer_len = dma->actual_len;
}
@@ -1491,7 +1491,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
* shouldn't this be the "half full" double buffer case?
*/
if (dma_channel_status(dma) == MGC_DMA_STATUS_BUSY) {
- dma->bStatus = MGC_DMA_STATUS_CORE_ABORT;
+ dma->status = MGC_DMA_STATUS_CORE_ABORT;
(void) musb->dma_controller->channel_abort(dma);
xfer_len = dma->actual_len;
bDone = TRUE;
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -144,7 +144,7 @@ static struct dma_channel* dma_channel_allocate(struct dma_controller *c,
pImplChannel->bTransmit = bTransmit;
pChannel = &(pImplChannel->Channel);
pChannel->private_data = pImplChannel;
- pChannel->bStatus = MGC_DMA_STATUS_FREE;
+ pChannel->status = MGC_DMA_STATUS_FREE;
pChannel->max_len = 0x10000;
/* Tx => mode 1; Rx => mode 0 */
pChannel->bDesiredMode = bTransmit;
@@ -167,7 +167,7 @@ static void dma_channel_release(struct dma_channel *pChannel)
pImplChannel->pController->bmUsedChannels &=
~(1 << pImplChannel->bIndex);
- pChannel->bStatus = MGC_DMA_STATUS_UNKNOWN;
+ pChannel->status = MGC_DMA_STATUS_UNKNOWN;
}
static void configure_channel(struct dma_channel *pChannel,
@@ -232,14 +232,14 @@ static int dma_channel_program(struct dma_channel * pChannel,
pImplChannel->bTransmit ? "Tx" : "Rx",
wPacketSize, dma_addr, dwLength, bMode);
- BUG_ON(pChannel->bStatus == MGC_DMA_STATUS_UNKNOWN ||
- pChannel->bStatus == MGC_DMA_STATUS_BUSY);
+ BUG_ON(pChannel->status == MGC_DMA_STATUS_UNKNOWN ||
+ pChannel->status == MGC_DMA_STATUS_BUSY);
pChannel->actual_len = 0;
pImplChannel->dwStartAddress = dma_addr;
pImplChannel->len = dwLength;
pImplChannel->wMaxPacketSize = wPacketSize;
- pChannel->bStatus = MGC_DMA_STATUS_BUSY;
+ pChannel->status = MGC_DMA_STATUS_BUSY;
if ((bMode == 1) && (dwLength >= wPacketSize)) {
configure_channel(pChannel, wPacketSize, 1, dma_addr,
@@ -259,7 +259,7 @@ static int dma_channel_abort(struct dma_channel *pChannel)
u8 *mbase = pImplChannel->pController->pCoreBase;
u16 csr;
- if (pChannel->bStatus == MGC_DMA_STATUS_BUSY) {
+ if (pChannel->status == MGC_DMA_STATUS_BUSY) {
if (pImplChannel->bTransmit) {
csr = musb_readw(mbase,
@@ -289,7 +289,7 @@ static int dma_channel_abort(struct dma_channel *pChannel)
musb_writel(mbase,
MGC_HSDMA_CHANNEL_OFFSET(bChannel, MGC_O_HSDMA_COUNT), 0);
- pChannel->bStatus = MGC_DMA_STATUS_FREE;
+ pChannel->status = MGC_DMA_STATUS_FREE;
}
return 0;
}
@@ -322,7 +322,7 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
MGC_O_HSDMA_CONTROL));
if (wCsr & (1 << MGC_S_HSDMA_BUSERROR)) {
- pImplChannel->Channel.bStatus =
+ pImplChannel->Channel.status =
MGC_DMA_STATUS_BUS_ABORT;
} else {
dwAddress = musb_readl(mbase,
@@ -343,7 +343,7 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
u8 devctl = musb_readb(mbase,
MGC_O_HDRC_DEVCTL);
- pChannel->bStatus = MGC_DMA_STATUS_FREE;
+ pChannel->status = MGC_DMA_STATUS_FREE;
/* completed */
if ((devctl & MGC_M_DEVCTL_HM)
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -202,7 +202,7 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
if (!dmareq_works())
tusb_omap_free_shared_dmareq(chdat);
- channel->bStatus = MGC_DMA_STATUS_FREE;
+ channel->status = MGC_DMA_STATUS_FREE;
/* Handle only RX callbacks here. TX callbacks musb be handled based
* on the TUSB DMA status interrupt.
@@ -296,7 +296,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
chdat->len = len;
channel->actual_len = 0;
chdat->dma_addr = (void __iomem *)dma_addr;
- channel->bStatus = MGC_DMA_STATUS_BUSY;
+ channel->status = MGC_DMA_STATUS_BUSY;
/* Since we're recycling dma areas, we need to clean or invalidate */
if (chdat->tx) {
@@ -430,7 +430,7 @@ static int tusb_omap_dma_abort(struct dma_channel *channel)
tusb_dma->sync_dev = -1;
}
- channel->bStatus = MGC_DMA_STATUS_FREE;
+ channel->status = MGC_DMA_STATUS_FREE;
return 0;
}
@@ -521,8 +521,8 @@ tusb_omap_dma_allocate(struct dma_controller *c,
for (i = 0; i < MAX_DMAREQ; i++) {
struct dma_channel *ch = dma_channel_pool[i];
- if (ch->bStatus == MGC_DMA_STATUS_UNKNOWN) {
- ch->bStatus = MGC_DMA_STATUS_FREE;
+ if (ch->status == MGC_DMA_STATUS_UNKNOWN) {
+ ch->status = MGC_DMA_STATUS_FREE;
channel = ch;
chdat = ch->private_data;
break;
@@ -589,7 +589,7 @@ free_dmareq:
tusb_omap_dma_free_dmareq(chdat);
DBG(3, "ep%i: Could not get a DMA channel\n", chdat->epnum);
- channel->bStatus = MGC_DMA_STATUS_UNKNOWN;
+ channel->status = MGC_DMA_STATUS_UNKNOWN;
return NULL;
}
@@ -617,7 +617,7 @@ static void tusb_omap_dma_release(struct dma_channel *channel)
reg |= (1 << (chdat->epnum + 15));
musb_writel(tusb_base, TUSB_DMA_INT_CLEAR, reg);
- channel->bStatus = MGC_DMA_STATUS_UNKNOWN;
+ channel->status = MGC_DMA_STATUS_UNKNOWN;
if (chdat->ch >= 0) {
omap_stop_dma(chdat->ch);
@@ -702,7 +702,7 @@ dma_controller_create(struct musb *musb, void __iomem *base)
if (!chdat)
goto cleanup;
- ch->bStatus = MGC_DMA_STATUS_UNKNOWN;
+ ch->status = MGC_DMA_STATUS_UNKNOWN;
ch->private_data = chdat;
}
--
1.5.2.3
next prev parent reply other threads:[~2007-08-13 13:49 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-13 13:48 (no subject) Tony Lindgren
2007-08-13 13:48 ` [PATCH 1/52] musb_hdrc: Search and replace pThis with musb Tony Lindgren
2007-08-13 13:48 ` [PATCH 2/52] musb_hdrc: Search and replace pEndPt with hw_ep Tony Lindgren
2007-08-13 13:48 ` [PATCH 3/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_ep Tony Lindgren
2007-08-13 13:48 ` [PATCH 4/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_hw_ep Tony Lindgren
2007-08-13 13:48 ` [PATCH 5/52] musb_hdrc: Search and replace pRegs with mregs Tony Lindgren
2007-08-13 13:48 ` [PATCH 6/52] musb_hdrc: Search and replace pBase with mbase Tony Lindgren
2007-08-13 13:48 ` [PATCH 7/52] musb_hdrc: Search and replace pSource with src Tony Lindgren
2007-08-13 13:48 ` [PATCH 8/52] musb_hdrc: Search and replace pDest with dst Tony Lindgren
2007-08-13 13:48 ` [PATCH 9/52] musb_hdrc: Search and replace dwCount with len Tony Lindgren
2007-08-13 13:48 ` [PATCH 10/52] musb_hdrc: Search and replace wFifoCount with fifo_count Tony Lindgren
2007-08-13 13:48 ` [PATCH 11/52] musb_hdrc: Search and replace wCount with len Tony Lindgren
2007-08-13 13:48 ` [PATCH 12/52] musb_hdrc: Search and replace bLocalEnd with epnum Tony Lindgren
2007-08-13 13:48 ` [PATCH 13/52] musb_hdrc: Search and replace aLocalEnd with endpoints Tony Lindgren
2007-08-13 13:48 ` [PATCH 14/52] musb_hdrc: Search and replace bEndCount with nr_endpoints Tony Lindgren
2007-08-13 13:48 ` [PATCH 15/52] musb_hdrc: Search and replace bEndNumber with current_epnum Tony Lindgren
2007-08-13 13:48 ` [PATCH 16/52] musb_hdrc: Search and replace bEnd0Stage with ep0_stage Tony Lindgren
2007-08-13 13:48 ` [PATCH 17/52] musb_hdrc: Search and replace bEnd with epnum Tony Lindgren
2007-08-13 13:48 ` [PATCH 18/52] musb_hdrc: Search and replace Lock with lock Tony Lindgren
2007-08-13 13:48 ` [PATCH 19/52] musb_hdrc: Search and replace MGC_SelectEnd with musb_ep_select Tony Lindgren
2007-08-13 13:48 ` [PATCH 20/52] musb_hdrc: Search and replace _pthis with _musb Tony Lindgren
2007-08-13 13:48 ` [PATCH 21/52] musb_hdrc: Search and replace bIsHost with is_host Tony Lindgren
2007-08-13 13:48 ` [PATCH 22/52] musb_hdrc: Get rid of old unused MUSB_EpFifoDescriptor Tony Lindgren
2007-08-13 13:48 ` [PATCH 23/52] musb_hdrc: Search and replace bIsSharedFifo with is_shared_fifo Tony Lindgren
2007-08-13 13:48 ` [PATCH 24/52] musb_hdrc: Search and replace wMaxPacketSizeTx with max_packet_sz_tx Tony Lindgren
2007-08-13 13:49 ` [PATCH 25/52] musb_hdrc: Search and replace wMaxPacketSizeRx with max_packet_sz_rx Tony Lindgren
2007-08-13 13:49 ` [PATCH 26/52] musb_hdrc: Search and replace pDmaController with dma_controller Tony Lindgren
2007-08-13 13:49 ` [PATCH 27/52] musb_hdrc: Search and replace bIsMultipoint with is_multipoint Tony Lindgren
2007-08-13 13:49 ` [PATCH 28/52] musb_hdrc: Search and replace bIgnoreDisconnect with ignore_disconnect Tony Lindgren
2007-08-13 13:49 ` [PATCH 29/52] musb_hdrc: Search and replace bBulkSplit with bulk_split Tony Lindgren
2007-08-13 13:49 ` [PATCH 30/52] musb_hdrc: Search and replace bBulkCombine with bulk_combine Tony Lindgren
2007-08-13 13:49 ` [PATCH 31/52] musb_hdrc: Search and replace bAddress with address Tony Lindgren
2007-08-13 13:49 ` [PATCH 32/52] musb_hdrc: Search and replace bTestModeValue with test_mode_nr Tony Lindgren
2007-08-13 13:49 ` [PATCH 33/52] musb_hdrc: Search and replace bTestMode with test_mode Tony Lindgren
2007-08-13 13:49 ` [PATCH 34/52] musb_hdrc: Search and replace pGadgetDriver with gadget_driver Tony Lindgren
2007-08-13 13:49 ` [PATCH 35/52] musb_hdrc: Search and replace bDelayPortPowerOff with delay_port_power_off Tony Lindgren
2007-08-13 13:49 ` [PATCH 36/52] musb_hdrc: Search and replace pProcEntry with proc_entry Tony Lindgren
2007-08-13 13:49 ` [PATCH 37/52] musb_hdrc: Search and replace pPrivateData with private_data Tony Lindgren
2007-08-13 13:49 ` [PATCH 38/52] musb_hdrc: Search and replace dwMaxLength with max_len Tony Lindgren
2007-08-13 13:49 ` [PATCH 39/52] musb_hdrc: Search and replace dwActualLength with actual_len Tony Lindgren
2007-08-13 13:49 ` Tony Lindgren [this message]
2007-08-13 13:49 ` [PATCH 41/52] musb_hdrc: Search and replace bDesiredMode with desired_mode Tony Lindgren
2007-08-13 13:49 ` [PATCH 42/52] musb_hdrc: Search and replace bMode with mode Tony Lindgren
2007-08-13 13:49 ` [PATCH 43/52] musb_hdrc: Search and replace MGC_pfDmaProgramChannel with dma_program_channel Tony Lindgren
2007-08-13 13:49 ` [PATCH 44/52] musb_hdrc: Search and replace pControlRequest with ctrlrequest Tony Lindgren
2007-08-13 13:49 ` [PATCH 45/52] musb_hdrc: Search and replace bResult with result Tony Lindgren
2007-08-13 13:49 ` [PATCH 46/52] musb_hdrc: Search and replace bSetAddress with set_address Tony Lindgren
2007-08-13 13:49 ` [PATCH 47/52] musb_hdrc: Search and replace bRecip with recip Tony Lindgren
2007-08-13 13:49 ` [PATCH 48/52] musb_hdrc: Search and replace pRequest with request Tony Lindgren
2007-08-13 13:49 ` [PATCH 49/52] musb_hdrc: Search and replace wCsrVal with csr Tony Lindgren
2007-08-13 13:49 ` [PATCH 50/52] musb_hdrc: Search and replace bTx with tx Tony Lindgren
2007-08-13 13:49 ` [PATCH 51/52] musb_hdrc: Search and replace wPacketSize with packet_sz Tony Lindgren
2007-08-13 13:49 ` [PATCH 52/52] musb_hdrc: Search and replace channelNum with chnum Tony Lindgren
2007-08-14 9:23 ` [PATCH 4/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_hw_ep Tony Lindgren
2007-08-13 13:58 ` (no subject) Felipe Balbi
2007-08-14 8:06 ` musb CaMeLcAsEnOmOre (was: (no subject)) David Brownell
2007-08-14 8:55 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11870130771666-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox