From: Tony Lindgren <tony@atomide.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 6/8] musb_hdrc: Search and replace MGC_XXX_OFFSET with MUSB_XXX_OFFSET
Date: Wed, 15 Aug 2007 07:21:43 -0700 [thread overview]
Message-ID: <11871877241489-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <11871877214142-git-send-email-tony@atomide.com>
Search and replace MGC_XXX_OFFSET with MUSB_XXX_OFFSET
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/usb/musb/musb_host.c | 6 +++---
drivers/usb/musb/musb_procfs.c | 12 ++++++------
drivers/usb/musb/musbdefs.h | 6 +++---
drivers/usb/musb/musbhdrc.h | 8 ++++----
drivers/usb/musb/plat_uds.c | 2 +-
5 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index ea6db02..99e3dce 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -722,13 +722,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
/* target addr and (for multipoint) hub addr/port */
if (musb->is_multipoint) {
musb_writeb(mbase,
- MGC_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
+ MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
qh->addr_reg);
musb_writeb(mbase,
- MGC_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
+ MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
qh->h_addr_reg);
musb_writeb(mbase,
- MGC_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
+ MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
qh->h_port_reg);
/* FIXME if !epnum, do the same for RX ... */
} else
diff --git a/drivers/usb/musb/musb_procfs.c b/drivers/usb/musb/musb_procfs.c
index 1dbacf4..dc77420 100644
--- a/drivers/usb/musb/musb_procfs.c
+++ b/drivers/usb/musb/musb_procfs.c
@@ -285,13 +285,13 @@ dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max)
musb_readb(regs, MUSB_RXTYPE),
/* FIXME: assumes multipoint */
musb_readb(musb->mregs,
- MGC_BUSCTL_OFFSET(epnum,
+ MUSB_BUSCTL_OFFSET(epnum,
MUSB_RXFUNCADDR)),
musb_readb(musb->mregs,
- MGC_BUSCTL_OFFSET(epnum,
+ MUSB_BUSCTL_OFFSET(epnum,
MUSB_RXHUBADDR)),
musb_readb(musb->mregs,
- MGC_BUSCTL_OFFSET(epnum,
+ MUSB_BUSCTL_OFFSET(epnum,
MUSB_RXHUBPORT))
);
if (code <= 0)
@@ -373,13 +373,13 @@ dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max)
musb_readb(regs, MUSB_TXTYPE),
/* FIXME: assumes multipoint */
musb_readb(musb->mregs,
- MGC_BUSCTL_OFFSET(epnum,
+ MUSB_BUSCTL_OFFSET(epnum,
MUSB_TXFUNCADDR)),
musb_readb(musb->mregs,
- MGC_BUSCTL_OFFSET(epnum,
+ MUSB_BUSCTL_OFFSET(epnum,
MUSB_TXHUBADDR)),
musb_readb(musb->mregs,
- MGC_BUSCTL_OFFSET(epnum,
+ MUSB_BUSCTL_OFFSET(epnum,
MUSB_TXHUBPORT))
);
if (code <= 0)
diff --git a/drivers/usb/musb/musbdefs.h b/drivers/usb/musb/musbdefs.h
index 5ce0505..eb09ea2 100644
--- a/drivers/usb/musb/musbdefs.h
+++ b/drivers/usb/musb/musbdefs.h
@@ -220,18 +220,18 @@ enum musb_g_ep0_state {
#if defined(CONFIG_USB_TUSB6010)
#define musb_ep_select(_mbase, _epnum) \
musb_writeb((_mbase), MUSB_INDEX, (_epnum))
-#define MGC_END_OFFSET MGC_TUSB_OFFSET
+#define MGC_END_OFFSET MUSB_TUSB_OFFSET
/* "flat" mapping: each endpoint has its own i/o address */
#elif defined(MUSB_FLAT_REG)
#define musb_ep_select(_mbase, _epnum) (((void)(_mbase)),((void)(_epnum)))
-#define MGC_END_OFFSET MGC_FLAT_OFFSET
+#define MGC_END_OFFSET MUSB_FLAT_OFFSET
/* "indexed" mapping: INDEX register controls register bank select */
#else
#define musb_ep_select(_mbase, _epnum) \
musb_writeb((_mbase), MUSB_INDEX, (_epnum))
-#define MGC_END_OFFSET MGC_INDEXED_OFFSET
+#define MGC_END_OFFSET MUSB_INDEXED_OFFSET
#endif
/****************************** FUNCTIONS ********************************/
diff --git a/drivers/usb/musb/musbhdrc.h b/drivers/usb/musb/musbhdrc.h
index c862e65..9646bb6 100644
--- a/drivers/usb/musb/musbhdrc.h
+++ b/drivers/usb/musb/musbhdrc.h
@@ -105,16 +105,16 @@
#define MUSB_CONFIGDATA MUSB_FIFOSIZE /* re-used for EP0 */
/* offsets to endpoint registers in indexed model (using INDEX register) */
-#define MGC_INDEXED_OFFSET(_epnum, _offset) \
+#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
(0x10 + (_offset))
/* offsets to endpoint registers in flat models */
-#define MGC_FLAT_OFFSET(_epnum, _offset) \
+#define MUSB_FLAT_OFFSET(_epnum, _offset) \
(0x100 + (0x10*(_epnum)) + (_offset))
#ifdef CONFIG_USB_TUSB6010
/* TUSB6010 EP0 configuration register is special */
-#define MGC_TUSB_OFFSET(_epnum, _offset) \
+#define MUSB_TUSB_OFFSET(_epnum, _offset) \
(0x10 + _offset)
#include "tusb6010.h" /* needed "only" for TUSB_EP0_CONF */
#endif
@@ -128,7 +128,7 @@
#define MUSB_RXHUBADDR 0x06
#define MUSB_RXHUBPORT 0x07
-#define MGC_BUSCTL_OFFSET(_epnum, _offset) \
+#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
(0x80 + (8*(_epnum)) + (_offset))
/*
diff --git a/drivers/usb/musb/plat_uds.c b/drivers/usb/musb/plat_uds.c
index 71e89d8..348c246 100644
--- a/drivers/usb/musb/plat_uds.c
+++ b/drivers/usb/musb/plat_uds.c
@@ -1380,7 +1380,7 @@ static int __init musb_core_init(u16 wType, struct musb *musb)
hw_ep->regs = MGC_END_OFFSET(i, 0) + mbase;
#ifdef CONFIG_USB_MUSB_HDRC_HCD
- hw_ep->target_regs = MGC_BUSCTL_OFFSET(i, 0) + mbase;
+ hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase;
hw_ep->rx_reinit = 1;
hw_ep->tx_reinit = 1;
#endif
--
1.5.2.3
next prev parent reply other threads:[~2007-08-15 14:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-15 14:21 [PATCH 0/8] musb_hdrc: Series of patches to clean-up musbhdrc.h Tony Lindgren
2007-08-15 14:21 ` [PATCH 1/8] musb_hdrc: Search and replace MGC_O_HDRC_ with MUSB_ Tony Lindgren
2007-08-15 14:21 ` [PATCH 2/8] musb_hdrc: Search and replace MGC_M_ " Tony Lindgren
2007-08-15 14:21 ` [PATCH 3/8] musb_hdrc: Search and replace MGC_S_XXX with MUSB_XXX_SHIFT Tony Lindgren
2007-08-15 14:21 ` [PATCH 4/8] musb_hdrc: Search and replace MGC_END0_FIFOSIZE with MUSB_EP0_FIFOSIZE, remove MGC_MAX_USB_ENDS Tony Lindgren
2007-08-15 14:21 ` [PATCH 5/8] musb_hdrc: Search and replace _bOffset with _offset Tony Lindgren
2007-08-15 14:21 ` Tony Lindgren [this message]
2007-08-15 14:21 ` [PATCH 7/8] musb_hdrc: Remove old unsed MGC_TYPE_SPEED_XXX Tony Lindgren
2007-08-15 14:21 ` [PATCH 8/8] musb_hdrc: Tabify and clean-up musbhdrc.h Tony Lindgren
2007-08-15 16:20 ` David Brownell
2007-08-16 6:46 ` [PATCH] musb_hdrc: Add Nokia Copyright, Make GPLv2 text generic (Was: [PATCH 8/8] musb_hdrc: Tabify and clean-up musbhdrc.h) Tony Lindgren
2007-08-16 7:50 ` David Brownell
2007-08-16 9:13 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11871877241489-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox