From: Tony Lindgren <tony@atomide.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 9/36] musb_hdrc: Search and replace pBuffer with buf
Date: Thu, 16 Aug 2007 02:40:32 -0700 [thread overview]
Message-ID: <11872572803477-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1187257278289-git-send-email-tony@atomide.com>
Search and replace pBuffer with buf
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/usb/musb/musb_host.c | 36 ++++++++++++++++++------------------
1 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 3b94630..4390e42 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -105,7 +105,7 @@
static void musb_ep_program(struct musb *musb, u8 epnum,
struct urb *urb, unsigned int nOut,
- u8 * pBuffer, u32 dwLength);
+ u8 * buf, u32 dwLength);
/*
* Clear TX fifo. Needed to avoid BABBLE errors.
@@ -171,7 +171,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
{
u16 wFrame;
u32 dwLength;
- void *pBuffer;
+ void *buf;
void __iomem *mbase = musb->mregs;
struct urb *urb = next_urb(qh);
struct musb_hw_ep *hw_ep = qh->hw_ep;
@@ -190,17 +190,17 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
is_in = 0;
hw_ep->out_qh = qh;
musb->ep0_stage = MGC_END0_START;
- pBuffer = urb->setup_packet;
+ buf = urb->setup_packet;
dwLength = 8;
break;
case USB_ENDPOINT_XFER_ISOC:
qh->iso_idx = 0;
qh->frame = 0;
- pBuffer = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+ buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
dwLength = urb->iso_frame_desc[0].length;
break;
default: /* bulk, interrupt */
- pBuffer = urb->transfer_buffer;
+ buf = urb->transfer_buffer;
dwLength = urb->transfer_buffer_length;
}
@@ -213,14 +213,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
default: s = "-intr"; break;
}; s;}),
- epnum, pBuffer, dwLength);
+ epnum, buf, dwLength);
/* Configure endpoint */
if (is_in || hw_ep->is_shared_fifo)
hw_ep->in_qh = qh;
else
hw_ep->out_qh = qh;
- musb_ep_program(musb, epnum, urb, !is_in, pBuffer, dwLength);
+ musb_ep_program(musb, epnum, urb, !is_in, buf, dwLength);
/* transmit may have more work: start it when it is time */
if (is_in)
@@ -470,7 +470,7 @@ static u8 musb_host_packet_rx(struct musb *musb, struct urb *urb,
u8 epnum, u8 bIsochError)
{
u16 wRxCount;
- u8 *pBuffer;
+ u8 *buf;
u16 csr;
u8 bDone = FALSE;
u32 length;
@@ -498,7 +498,7 @@ static u8 musb_host_packet_rx(struct musb *musb, struct urb *urb,
}
d = urb->iso_frame_desc + qh->iso_idx;
- pBuffer = buffer + d->offset;
+ buf = buffer + d->offset;
length = d->length;
if (wRxCount > length) {
if (status == 0) {
@@ -518,7 +518,7 @@ static u8 musb_host_packet_rx(struct musb *musb, struct urb *urb,
bDone = (++qh->iso_idx >= urb->number_of_packets);
} else {
/* non-isoch */
- pBuffer = buffer + qh->offset;
+ buf = buffer + qh->offset;
length = urb->transfer_buffer_length - qh->offset;
if (wRxCount > length) {
if (urb->status == -EINPROGRESS)
@@ -542,7 +542,7 @@ static u8 musb_host_packet_rx(struct musb *musb, struct urb *urb,
urb->status = -EREMOTEIO;
}
- musb_read_fifo(hw_ep, length, pBuffer);
+ musb_read_fifo(hw_ep, length, buf);
csr = musb_readw(epio, MUSB_RXCSR);
csr |= MUSB_RXCSR_H_WZC_BITS;
@@ -625,7 +625,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
*/
static void musb_ep_program(struct musb *musb, u8 epnum,
struct urb *urb, unsigned int is_out,
- u8 * pBuffer, u32 dwLength)
+ u8 * buf, u32 dwLength)
{
struct dma_controller *dma_controller;
struct dma_channel *pDmaChannel;
@@ -855,7 +855,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
/* PIO to load FIFO */
qh->segsize = wLoadCount;
- musb_write_fifo(hw_ep, wLoadCount, pBuffer);
+ musb_write_fifo(hw_ep, wLoadCount, buf);
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~(MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_DMAMODE
@@ -1168,7 +1168,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
u8 bDone = FALSE;
u16 tx_csr;
size_t wLength = 0;
- u8 *pBuffer = NULL;
+ u8 *buf = NULL;
struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
@@ -1274,7 +1274,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
bDone = TRUE;
} else if (!dma) {
d++;
- pBuffer = urb->transfer_buffer + d->offset;
+ buf = urb->transfer_buffer + d->offset;
wLength = d->length;
}
} else if (dma) {
@@ -1288,7 +1288,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
& URB_ZERO_PACKET))
bDone = TRUE;
if (!bDone) {
- pBuffer = urb->transfer_buffer
+ buf = urb->transfer_buffer
+ qh->offset;
wLength = urb->transfer_buffer_length
- qh->offset;
@@ -1312,7 +1312,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
} else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
- // WARN_ON(!pBuffer);
+ // WARN_ON(!buf);
/* REVISIT: some docs say that when hw_ep->tx_double_buffered,
* (and presumably, fifo is not half-full) we should write TWO
@@ -1320,7 +1320,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
*/
/* PIO: start next packet in this URB */
wLength = min(qh->maxpacket, (u16) wLength);
- musb_write_fifo(hw_ep, wLength, pBuffer);
+ musb_write_fifo(hw_ep, wLength, buf);
qh->segsize = wLength;
musb_ep_select(mbase, epnum);
--
1.5.2.3
next prev parent reply other threads:[~2007-08-16 9:40 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-16 9:40 [PATCH 0/36] musb_hdrc: Yet more musb clean-up Tony Lindgren
2007-08-16 9:40 ` [PATCH 1/36] musb_hdrc: Add Nokia copyright, make GPLv2 license generic Tony Lindgren
2007-08-16 9:40 ` [PATCH 2/36]_csr Tony Lindgren
2007-08-16 9:40 ` [PATCH 3/36] musb_hdrc: Search and replace wCsr with csr Tony Lindgren
2007-08-16 9:40 ` [PATCH 4/36]xe Tony Lindgren
2007-08-16 9:40 ` [PATCH 5/36] musb_hdrc: Search and replace bIntrUSB with int_usb Tony Lindgren
2007-08-16 9:40 ` [PATCH 6/36] musb_hdrc: Search and replace bIntr with int_hsdma Tony Lindgren
2007-08-16 9:40 ` [PATCH 7/36] musb_hdrc: Search and replace bTransmit with transmit Tony Lindgren
2007-08-16 9:40 ` [PATCH 8/36] musb_hdrc: Search and replace pUrb with urb Tony Lindgren
2007-08-16 9:40 ` Tony Lindgren [this message]
2007-08-16 9:40 ` [PATCH 10/36] musb_hdrc: Search and replace dwLength with len Tony Lindgren
2007-08-16 9:40 ` [PATCH 11/36] musb_hdrc: Search and replace wEndMask with epmask Tony Lindgren
2007-08-16 9:40 ` [PATCH 12/36] musb_hdrc: Search and replace pDmaChannel with dma_channel Tony Lindgren
2007-08-16 9:40 ` [PATCH 13/36] musb_hdrc: Search and replace wRxCount with rx_count Tony Lindgren
2007-08-16 9:40 ` [PATCH 14/36] musb_hdrc: Search and replace bDone with done Tony Lindgren
2007-08-16 9:40 ` [PATCH 15/36] musb_hdrc: Search and replace nPipe with pipe Tony Lindgren
2007-08-16 9:40 ` [PATCH 16/36] musb_hdrc: Search and replace wLoadCount with load_count Tony Lindgren
2007-08-16 9:40 ` [PATCH 17/36] musb_hdrc: Search and replace bDmaOk with dma_ok Tony Lindgren
2007-08-16 9:40 ` [PATCH 18/36] musb_hdrc: Search and replace pFifoDest with fifo_dest Tony Lindgren
2007-08-16 9:40 ` [PATCH 19/36] musb_hdrc: Search and replace pFifoSource with fifo_src Tony Lindgren
2007-08-16 9:40 ` [PATCH 20/36] musb_hdrc: Search and replace bIsochError with iso_err Tony Lindgren
2007-08-16 9:40 ` [PATCH 21/36] musb_hdrc: Search and replace wVal with val, except for wValue Tony Lindgren
2007-08-16 9:40 ` [PATCH 22/36] musb_hdrc: Search and replace wBestDiff with best_diff Tony Lindgren
2007-08-16 9:40 ` [PATCH 23/36] musb_hdrc: Search and replace nBestEnd with best_end Tony Lindgren
2007-08-16 9:40 ` [PATCH 24/36] musb_hdrc: Search and replace nEnd with epnum Tony Lindgren
2007-08-16 9:40 ` [PATCH 25/36] musb_hdrc: Search and replace wFrame with frame Tony Lindgren
2007-08-16 9:40 ` [PATCH 26/36] musb_hdrc: Search and replace wRelease with hwvers Tony Lindgren
2007-08-16 9:40 ` [PATCH 27/36] musb_hdrc: Search and replace wRelMajor with rev_major Tony Lindgren
2007-08-16 9:40 ` [PATCH 28/36] musb_hdrc: Search and replace wRelMinor with rev_minor Tony Lindgren
2007-08-16 9:40 ` [PATCH 29/36] musb_hdrc: Search and replace dwData with data Tony Lindgren
2007-08-16 9:40 ` [PATCH 30/36] musb_hdrc: Search and replace pController with controller Tony Lindgren
2007-08-16 9:40 ` [PATCH 31/36] musb_hdrc: Search and replace wType with musb_type Tony Lindgren
2007-08-16 9:40 ` [PATCH 32/36] musb_hdrc: Search and replace bReg with reg Tony Lindgren
2007-08-16 9:40 ` [PATCH 33/36] musb_hdrc: Search and replace bMore with more Tony Lindgren
2007-08-16 9:40 ` [PATCH 34/36] musb_hdrc: Search and replace bComplete with complete Tony Lindgren
2007-08-16 9:40 ` [PATCH 35/36] musb_hdrc: Get rid of unnecessary DMA typedef & fix a comment typo Tony Lindgren
2007-08-16 9:40 ` [PATCH 36/36] musb_hdrc: Search and replace MGC_DMA with MUSB_DMA Tony Lindgren
2007-08-16 18:03 ` [PATCH 8/36] musb_hdrc: Search and replace pUrb with urb David Brownell
2007-08-17 7:18 ` Tony Lindgren
2007-08-16 10:55 ` [PATCH 0/36] musb_hdrc: Yet more musb clean-up Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11872572803477-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox