From: Tony Lindgren <tony@atomide.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 15/36] musb_hdrc: Search and replace nPipe with pipe
Date: Thu, 16 Aug 2007 02:40:38 -0700 [thread overview]
Message-ID: <1187257294890-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1187257291525-git-send-email-tony@atomide.com>
Search and replace nPipe with pipe
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/usb/musb/musb_host.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index e821831..093edc1 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -175,8 +175,8 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
void __iomem *mbase = musb->mregs;
struct urb *urb = next_urb(qh);
struct musb_hw_ep *hw_ep = qh->hw_ep;
- unsigned nPipe = urb->pipe;
- u8 address = usb_pipedevice(nPipe);
+ unsigned pipe = urb->pipe;
+ u8 address = usb_pipedevice(pipe);
int epnum = hw_ep->epnum;
/* initialize software qh state */
@@ -478,7 +478,7 @@ static u8 musb_host_packet_rx(struct musb *musb, struct urb *urb,
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
struct musb_qh *qh = hw_ep->in_qh;
- int nPipe = urb->pipe;
+ int pipe = urb->pipe;
void *buffer = urb->transfer_buffer;
// musb_ep_select(mbase, epnum);
@@ -488,7 +488,7 @@ static u8 musb_host_packet_rx(struct musb *musb, struct urb *urb,
urb->transfer_buffer_length);
/* unload FIFO */
- if (usb_pipeisoc(nPipe)) {
+ if (usb_pipeisoc(pipe)) {
int status = 0;
struct usb_iso_packet_descriptor *d;
@@ -1164,7 +1164,7 @@ done:
/* Service a Tx-Available or dma completion irq for the endpoint */
void musb_host_tx(struct musb *musb, u8 epnum)
{
- int nPipe;
+ int pipe;
u8 done = FALSE;
u16 tx_csr;
size_t wLength = 0;
@@ -1188,7 +1188,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
goto finish;
}
- nPipe = urb->pipe;
+ pipe = urb->pipe;
dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
dma ? ", dma" : "");
@@ -1258,14 +1258,14 @@ void musb_host_tx(struct musb *musb, u8 epnum)
}
/* REVISIT this looks wrong... */
- if (!status || dma || usb_pipeisoc(nPipe)) {
+ if (!status || dma || usb_pipeisoc(pipe)) {
if (dma)
wLength = dma->actual_len;
else
wLength = qh->segsize;
qh->offset += wLength;
- if (usb_pipeisoc(nPipe)) {
+ if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
d = urb->iso_frame_desc + qh->iso_idx;
@@ -1385,7 +1385,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
struct musb_qh *qh = hw_ep->in_qh;
size_t xfer_len;
void __iomem *mbase = musb->mregs;
- int nPipe;
+ int pipe;
u16 rx_csr, wVal;
u8 bIsochError = FALSE;
u8 done = FALSE;
@@ -1412,7 +1412,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
return;
}
- nPipe = urb->pipe;
+ pipe = urb->pipe;
DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zd)\n",
epnum, rx_csr, urb->actual_length,
--
1.5.2.3
next prev parent reply other threads:[~2007-08-16 9:40 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-16 9:40 [PATCH 0/36] musb_hdrc: Yet more musb clean-up Tony Lindgren
2007-08-16 9:40 ` [PATCH 1/36] musb_hdrc: Add Nokia copyright, make GPLv2 license generic Tony Lindgren
2007-08-16 9:40 ` [PATCH 2/36]_csr Tony Lindgren
2007-08-16 9:40 ` [PATCH 3/36] musb_hdrc: Search and replace wCsr with csr Tony Lindgren
2007-08-16 9:40 ` [PATCH 4/36]xe Tony Lindgren
2007-08-16 9:40 ` [PATCH 5/36] musb_hdrc: Search and replace bIntrUSB with int_usb Tony Lindgren
2007-08-16 9:40 ` [PATCH 6/36] musb_hdrc: Search and replace bIntr with int_hsdma Tony Lindgren
2007-08-16 9:40 ` [PATCH 7/36] musb_hdrc: Search and replace bTransmit with transmit Tony Lindgren
2007-08-16 9:40 ` [PATCH 8/36] musb_hdrc: Search and replace pUrb with urb Tony Lindgren
2007-08-16 9:40 ` [PATCH 9/36] musb_hdrc: Search and replace pBuffer with buf Tony Lindgren
2007-08-16 9:40 ` [PATCH 10/36] musb_hdrc: Search and replace dwLength with len Tony Lindgren
2007-08-16 9:40 ` [PATCH 11/36] musb_hdrc: Search and replace wEndMask with epmask Tony Lindgren
2007-08-16 9:40 ` [PATCH 12/36] musb_hdrc: Search and replace pDmaChannel with dma_channel Tony Lindgren
2007-08-16 9:40 ` [PATCH 13/36] musb_hdrc: Search and replace wRxCount with rx_count Tony Lindgren
2007-08-16 9:40 ` [PATCH 14/36] musb_hdrc: Search and replace bDone with done Tony Lindgren
2007-08-16 9:40 ` Tony Lindgren [this message]
2007-08-16 9:40 ` [PATCH 16/36] musb_hdrc: Search and replace wLoadCount with load_count Tony Lindgren
2007-08-16 9:40 ` [PATCH 17/36] musb_hdrc: Search and replace bDmaOk with dma_ok Tony Lindgren
2007-08-16 9:40 ` [PATCH 18/36] musb_hdrc: Search and replace pFifoDest with fifo_dest Tony Lindgren
2007-08-16 9:40 ` [PATCH 19/36] musb_hdrc: Search and replace pFifoSource with fifo_src Tony Lindgren
2007-08-16 9:40 ` [PATCH 20/36] musb_hdrc: Search and replace bIsochError with iso_err Tony Lindgren
2007-08-16 9:40 ` [PATCH 21/36] musb_hdrc: Search and replace wVal with val, except for wValue Tony Lindgren
2007-08-16 9:40 ` [PATCH 22/36] musb_hdrc: Search and replace wBestDiff with best_diff Tony Lindgren
2007-08-16 9:40 ` [PATCH 23/36] musb_hdrc: Search and replace nBestEnd with best_end Tony Lindgren
2007-08-16 9:40 ` [PATCH 24/36] musb_hdrc: Search and replace nEnd with epnum Tony Lindgren
2007-08-16 9:40 ` [PATCH 25/36] musb_hdrc: Search and replace wFrame with frame Tony Lindgren
2007-08-16 9:40 ` [PATCH 26/36] musb_hdrc: Search and replace wRelease with hwvers Tony Lindgren
2007-08-16 9:40 ` [PATCH 27/36] musb_hdrc: Search and replace wRelMajor with rev_major Tony Lindgren
2007-08-16 9:40 ` [PATCH 28/36] musb_hdrc: Search and replace wRelMinor with rev_minor Tony Lindgren
2007-08-16 9:40 ` [PATCH 29/36] musb_hdrc: Search and replace dwData with data Tony Lindgren
2007-08-16 9:40 ` [PATCH 30/36] musb_hdrc: Search and replace pController with controller Tony Lindgren
2007-08-16 9:40 ` [PATCH 31/36] musb_hdrc: Search and replace wType with musb_type Tony Lindgren
2007-08-16 9:40 ` [PATCH 32/36] musb_hdrc: Search and replace bReg with reg Tony Lindgren
2007-08-16 9:40 ` [PATCH 33/36] musb_hdrc: Search and replace bMore with more Tony Lindgren
2007-08-16 9:40 ` [PATCH 34/36] musb_hdrc: Search and replace bComplete with complete Tony Lindgren
2007-08-16 9:40 ` [PATCH 35/36] musb_hdrc: Get rid of unnecessary DMA typedef & fix a comment typo Tony Lindgren
2007-08-16 9:40 ` [PATCH 36/36] musb_hdrc: Search and replace MGC_DMA with MUSB_DMA Tony Lindgren
2007-08-16 18:03 ` [PATCH 8/36] musb_hdrc: Search and replace pUrb with urb David Brownell
2007-08-17 7:18 ` Tony Lindgren
2007-08-16 10:55 ` [PATCH 0/36] musb_hdrc: Yet more musb clean-up Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1187257294890-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox