From: Tony Lindgren <tony@atomide.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 20/36] musb_hdrc: Search and replace bIsochError with iso_err
Date: Thu, 16 Aug 2007 02:40:43 -0700 [thread overview]
Message-ID: <11872573062287-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1187257303715-git-send-email-tony@atomide.com>
Search and replace bIsochError with iso_err
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/usb/musb/musb_host.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 2607860..58499ee 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -467,7 +467,7 @@ static inline u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
* PIO RX for a packet (or part of it).
*/
static u8 musb_host_packet_rx(struct musb *musb, struct urb *urb,
- u8 epnum, u8 bIsochError)
+ u8 epnum, u8 iso_err)
{
u16 rx_count;
u8 *buf;
@@ -492,7 +492,7 @@ static u8 musb_host_packet_rx(struct musb *musb, struct urb *urb,
int status = 0;
struct usb_iso_packet_descriptor *d;
- if (bIsochError) {
+ if (iso_err) {
status = -EILSEQ;
urb->error_count++;
}
@@ -1387,7 +1387,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
void __iomem *mbase = musb->mregs;
int pipe;
u16 rx_csr, wVal;
- u8 bIsochError = FALSE;
+ u8 iso_err = FALSE;
u8 done = FALSE;
u32 status;
struct dma_channel *dma;
@@ -1452,7 +1452,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
} else {
DBG(4, "RX end %d ISO data error\n", epnum);
/* packet error reported later */
- bIsochError = TRUE;
+ iso_err = TRUE;
}
}
@@ -1634,7 +1634,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
if (!dma) {
done = musb_host_packet_rx(musb, urb,
- epnum, bIsochError);
+ epnum, iso_err);
DBG(6, "read %spacket\n", done ? "last " : "");
}
}
--
1.5.2.3
next prev parent reply other threads:[~2007-08-16 9:40 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-16 9:40 [PATCH 0/36] musb_hdrc: Yet more musb clean-up Tony Lindgren
2007-08-16 9:40 ` [PATCH 1/36] musb_hdrc: Add Nokia copyright, make GPLv2 license generic Tony Lindgren
2007-08-16 9:40 ` [PATCH 2/36]_csr Tony Lindgren
2007-08-16 9:40 ` [PATCH 3/36] musb_hdrc: Search and replace wCsr with csr Tony Lindgren
2007-08-16 9:40 ` [PATCH 4/36]xe Tony Lindgren
2007-08-16 9:40 ` [PATCH 5/36] musb_hdrc: Search and replace bIntrUSB with int_usb Tony Lindgren
2007-08-16 9:40 ` [PATCH 6/36] musb_hdrc: Search and replace bIntr with int_hsdma Tony Lindgren
2007-08-16 9:40 ` [PATCH 7/36] musb_hdrc: Search and replace bTransmit with transmit Tony Lindgren
2007-08-16 9:40 ` [PATCH 8/36] musb_hdrc: Search and replace pUrb with urb Tony Lindgren
2007-08-16 9:40 ` [PATCH 9/36] musb_hdrc: Search and replace pBuffer with buf Tony Lindgren
2007-08-16 9:40 ` [PATCH 10/36] musb_hdrc: Search and replace dwLength with len Tony Lindgren
2007-08-16 9:40 ` [PATCH 11/36] musb_hdrc: Search and replace wEndMask with epmask Tony Lindgren
2007-08-16 9:40 ` [PATCH 12/36] musb_hdrc: Search and replace pDmaChannel with dma_channel Tony Lindgren
2007-08-16 9:40 ` [PATCH 13/36] musb_hdrc: Search and replace wRxCount with rx_count Tony Lindgren
2007-08-16 9:40 ` [PATCH 14/36] musb_hdrc: Search and replace bDone with done Tony Lindgren
2007-08-16 9:40 ` [PATCH 15/36] musb_hdrc: Search and replace nPipe with pipe Tony Lindgren
2007-08-16 9:40 ` [PATCH 16/36] musb_hdrc: Search and replace wLoadCount with load_count Tony Lindgren
2007-08-16 9:40 ` [PATCH 17/36] musb_hdrc: Search and replace bDmaOk with dma_ok Tony Lindgren
2007-08-16 9:40 ` [PATCH 18/36] musb_hdrc: Search and replace pFifoDest with fifo_dest Tony Lindgren
2007-08-16 9:40 ` [PATCH 19/36] musb_hdrc: Search and replace pFifoSource with fifo_src Tony Lindgren
2007-08-16 9:40 ` Tony Lindgren [this message]
2007-08-16 9:40 ` [PATCH 21/36] musb_hdrc: Search and replace wVal with val, except for wValue Tony Lindgren
2007-08-16 9:40 ` [PATCH 22/36] musb_hdrc: Search and replace wBestDiff with best_diff Tony Lindgren
2007-08-16 9:40 ` [PATCH 23/36] musb_hdrc: Search and replace nBestEnd with best_end Tony Lindgren
2007-08-16 9:40 ` [PATCH 24/36] musb_hdrc: Search and replace nEnd with epnum Tony Lindgren
2007-08-16 9:40 ` [PATCH 25/36] musb_hdrc: Search and replace wFrame with frame Tony Lindgren
2007-08-16 9:40 ` [PATCH 26/36] musb_hdrc: Search and replace wRelease with hwvers Tony Lindgren
2007-08-16 9:40 ` [PATCH 27/36] musb_hdrc: Search and replace wRelMajor with rev_major Tony Lindgren
2007-08-16 9:40 ` [PATCH 28/36] musb_hdrc: Search and replace wRelMinor with rev_minor Tony Lindgren
2007-08-16 9:40 ` [PATCH 29/36] musb_hdrc: Search and replace dwData with data Tony Lindgren
2007-08-16 9:40 ` [PATCH 30/36] musb_hdrc: Search and replace pController with controller Tony Lindgren
2007-08-16 9:40 ` [PATCH 31/36] musb_hdrc: Search and replace wType with musb_type Tony Lindgren
2007-08-16 9:40 ` [PATCH 32/36] musb_hdrc: Search and replace bReg with reg Tony Lindgren
2007-08-16 9:40 ` [PATCH 33/36] musb_hdrc: Search and replace bMore with more Tony Lindgren
2007-08-16 9:40 ` [PATCH 34/36] musb_hdrc: Search and replace bComplete with complete Tony Lindgren
2007-08-16 9:40 ` [PATCH 35/36] musb_hdrc: Get rid of unnecessary DMA typedef & fix a comment typo Tony Lindgren
2007-08-16 9:40 ` [PATCH 36/36] musb_hdrc: Search and replace MGC_DMA with MUSB_DMA Tony Lindgren
2007-08-16 18:03 ` [PATCH 8/36] musb_hdrc: Search and replace pUrb with urb David Brownell
2007-08-17 7:18 ` Tony Lindgren
2007-08-16 10:55 ` [PATCH 0/36] musb_hdrc: Yet more musb clean-up Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11872573062287-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox