From: Tony Lindgren <tony@atomide.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 31/36] musb_hdrc: Search and replace wType with musb_type
Date: Thu, 16 Aug 2007 02:40:54 -0700 [thread overview]
Message-ID: <118725733255-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1187257329166-git-send-email-tony@atomide.com>
Search and replace wType with musb_type
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/usb/musb/plat_uds.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/musb/plat_uds.c b/drivers/usb/musb/plat_uds.c
index 358d0a5..b8d586f 100644
--- a/drivers/usb/musb/plat_uds.c
+++ b/drivers/usb/musb/plat_uds.c
@@ -1244,7 +1244,7 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
* configure endpoints, or take their config from silicon
*/
-static int __init musb_core_init(u16 wType, struct musb *musb)
+static int __init musb_core_init(u16 musb_type, struct musb *musb)
{
#ifdef MUSB_AHB_ID
u32 data;
@@ -1306,11 +1306,11 @@ static int __init musb_core_init(u16 wType, struct musb *musb)
data = musb_readl(mbase, 0x40c);
printk("ID3=%lx\n", (long unsigned)data);
reg = musb_readb(mbase, 0x400);
- wType = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC;
+ musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC;
#else
aDate[0] = 0;
#endif
- if (MUSB_CONTROLLER_MHDRC == wType) {
+ if (MUSB_CONTROLLER_MHDRC == musb_type) {
musb->is_multipoint = 1;
type = "M";
} else {
--
1.5.2.3
next prev parent reply other threads:[~2007-08-16 9:40 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-16 9:40 [PATCH 0/36] musb_hdrc: Yet more musb clean-up Tony Lindgren
2007-08-16 9:40 ` [PATCH 1/36] musb_hdrc: Add Nokia copyright, make GPLv2 license generic Tony Lindgren
2007-08-16 9:40 ` [PATCH 2/36]_csr Tony Lindgren
2007-08-16 9:40 ` [PATCH 3/36] musb_hdrc: Search and replace wCsr with csr Tony Lindgren
2007-08-16 9:40 ` [PATCH 4/36]xe Tony Lindgren
2007-08-16 9:40 ` [PATCH 5/36] musb_hdrc: Search and replace bIntrUSB with int_usb Tony Lindgren
2007-08-16 9:40 ` [PATCH 6/36] musb_hdrc: Search and replace bIntr with int_hsdma Tony Lindgren
2007-08-16 9:40 ` [PATCH 7/36] musb_hdrc: Search and replace bTransmit with transmit Tony Lindgren
2007-08-16 9:40 ` [PATCH 8/36] musb_hdrc: Search and replace pUrb with urb Tony Lindgren
2007-08-16 9:40 ` [PATCH 9/36] musb_hdrc: Search and replace pBuffer with buf Tony Lindgren
2007-08-16 9:40 ` [PATCH 10/36] musb_hdrc: Search and replace dwLength with len Tony Lindgren
2007-08-16 9:40 ` [PATCH 11/36] musb_hdrc: Search and replace wEndMask with epmask Tony Lindgren
2007-08-16 9:40 ` [PATCH 12/36] musb_hdrc: Search and replace pDmaChannel with dma_channel Tony Lindgren
2007-08-16 9:40 ` [PATCH 13/36] musb_hdrc: Search and replace wRxCount with rx_count Tony Lindgren
2007-08-16 9:40 ` [PATCH 14/36] musb_hdrc: Search and replace bDone with done Tony Lindgren
2007-08-16 9:40 ` [PATCH 15/36] musb_hdrc: Search and replace nPipe with pipe Tony Lindgren
2007-08-16 9:40 ` [PATCH 16/36] musb_hdrc: Search and replace wLoadCount with load_count Tony Lindgren
2007-08-16 9:40 ` [PATCH 17/36] musb_hdrc: Search and replace bDmaOk with dma_ok Tony Lindgren
2007-08-16 9:40 ` [PATCH 18/36] musb_hdrc: Search and replace pFifoDest with fifo_dest Tony Lindgren
2007-08-16 9:40 ` [PATCH 19/36] musb_hdrc: Search and replace pFifoSource with fifo_src Tony Lindgren
2007-08-16 9:40 ` [PATCH 20/36] musb_hdrc: Search and replace bIsochError with iso_err Tony Lindgren
2007-08-16 9:40 ` [PATCH 21/36] musb_hdrc: Search and replace wVal with val, except for wValue Tony Lindgren
2007-08-16 9:40 ` [PATCH 22/36] musb_hdrc: Search and replace wBestDiff with best_diff Tony Lindgren
2007-08-16 9:40 ` [PATCH 23/36] musb_hdrc: Search and replace nBestEnd with best_end Tony Lindgren
2007-08-16 9:40 ` [PATCH 24/36] musb_hdrc: Search and replace nEnd with epnum Tony Lindgren
2007-08-16 9:40 ` [PATCH 25/36] musb_hdrc: Search and replace wFrame with frame Tony Lindgren
2007-08-16 9:40 ` [PATCH 26/36] musb_hdrc: Search and replace wRelease with hwvers Tony Lindgren
2007-08-16 9:40 ` [PATCH 27/36] musb_hdrc: Search and replace wRelMajor with rev_major Tony Lindgren
2007-08-16 9:40 ` [PATCH 28/36] musb_hdrc: Search and replace wRelMinor with rev_minor Tony Lindgren
2007-08-16 9:40 ` [PATCH 29/36] musb_hdrc: Search and replace dwData with data Tony Lindgren
2007-08-16 9:40 ` [PATCH 30/36] musb_hdrc: Search and replace pController with controller Tony Lindgren
2007-08-16 9:40 ` Tony Lindgren [this message]
2007-08-16 9:40 ` [PATCH 32/36] musb_hdrc: Search and replace bReg with reg Tony Lindgren
2007-08-16 9:40 ` [PATCH 33/36] musb_hdrc: Search and replace bMore with more Tony Lindgren
2007-08-16 9:40 ` [PATCH 34/36] musb_hdrc: Search and replace bComplete with complete Tony Lindgren
2007-08-16 9:40 ` [PATCH 35/36] musb_hdrc: Get rid of unnecessary DMA typedef & fix a comment typo Tony Lindgren
2007-08-16 9:40 ` [PATCH 36/36] musb_hdrc: Search and replace MGC_DMA with MUSB_DMA Tony Lindgren
2007-08-16 18:03 ` [PATCH 8/36] musb_hdrc: Search and replace pUrb with urb David Brownell
2007-08-17 7:18 ` Tony Lindgren
2007-08-16 10:55 ` [PATCH 0/36] musb_hdrc: Yet more musb clean-up Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=118725733255-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox