From: Eduardo Valentin <edubezval@gmail.com>
To: linux-omap@vger.kernel.org
Cc: Felipe Balbi <felipe.balbi@nokia.com>,
Eduardo Valentin <eduardo.valentin@indt.org.br>
Subject: [PATCH] OMAP: MMC: Add several missing line breaks.
Date: Wed, 26 Mar 2008 11:33:45 -0400 [thread overview]
Message-ID: <1206545625-12709-2-git-send-email-edubezval@gmail.com> (raw)
In-Reply-To: <1206545625-12709-1-git-send-email-edubezval@gmail.com>
From: Felipe Balbi <felipe.balbi@nokia.com>
Misc clean up in omap_hsmmc.c to beautify debugging output.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
---
drivers/mmc/host/omap_hsmmc.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 3d4a7d1..70f6895 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -146,7 +146,7 @@ static void omap_mmc_stop_clock(struct mmc_omap_host *host)
OMAP_HSMMC_WRITE(host->base, SYSCTL,
OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
- dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped");
+ dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
}
/*
@@ -401,7 +401,7 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
return 0;
err:
- dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage \n");
+ dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
return ret;
}
@@ -760,11 +760,11 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
* MMC can still work without debounce clock.
*/
if (IS_ERR(host->dbclk))
- dev_dbg(mmc_dev(host->mmc), "Failed to get debounce clock \n");
+ dev_dbg(mmc_dev(host->mmc), "Failed to get debounce clock\n");
else
if (clk_enable(host->dbclk) != 0)
dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
- "clk failed\n");
+ " clk failed\n");
else
host->dbclk_enabled = 1;
@@ -793,7 +793,7 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED, pdev->name,
host);
if (ret) {
- dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ");
+ dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
goto irq_err;
}
@@ -820,7 +820,7 @@ err:
return ret;
irq_err:
- dev_dbg(mmc_dev(host->mmc), "Unable to configure MMC IRQs");
+ dev_dbg(mmc_dev(host->mmc), "Unable to configure MMC IRQs\n");
clk_disable(host->fclk);
clk_disable(host->iclk);
clk_put(host->fclk);
@@ -881,7 +881,7 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
if (ret)
dev_dbg(mmc_dev(host->mmc),
"Unable to handle MMC board"
- "level suspend\n");
+ " level suspend\n");
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
OMAP_HSMMC_WRITE(host->base, HCTL,
--
1.5.4.2
next prev parent reply other threads:[~2008-03-26 15:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-20 13:37 [PATCH] OMAP: MMC: Add several missing line breaks Felipe Balbi
2008-03-26 15:33 ` Eduardo Valentin
2008-03-26 15:33 ` Eduardo Valentin [this message]
2008-03-26 17:39 ` Felipe Balbi
2008-03-26 18:07 ` Eduardo Valentin
2008-03-28 10:36 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1206545625-12709-2-git-send-email-edubezval@gmail.com \
--to=edubezval@gmail.com \
--cc=eduardo.valentin@indt.org.br \
--cc=felipe.balbi@nokia.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox