[PATCH 1/2] Input: Fix lm8323 probe and module unloading

[Tony Lindgren <tony@atomide.com>]

Make module unloading and reloading behave:

- Driver probe could fail if input_register_device fails as
  no error was returned from probe

- Driver interrupt was using unused platform_data field,
  change to use i2c platform data interrupt instead

- Free resources on unloading module

- Mark platform data as __init_or_module

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-n800.c |    2 +-
 drivers/input/keyboard/lm8323.c  |   18 +++++++++++++-----
 include/linux/i2c/lm8323.h       |    2 --
 3 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c
index efcb25d..ae85c2c 100644
--- a/arch/arm/mach-omap2/board-n800.c
+++ b/arch/arm/mach-omap2/board-n800.c
@@ -642,7 +642,7 @@ static struct i2c_board_info __initdata n800_i2c_board_info_1[] = {
 
 extern struct tcm825x_platform_data n800_tcm825x_platform_data;
 
-static struct i2c_board_info __initdata n800_i2c_board_info_2[] = {
+static struct i2c_board_info __initdata_or_module n800_i2c_board_info_2[] = {
 #if defined (CONFIG_VIDEO_TCM825X) || defined (CONFIG_VIDEO_TCM825X_MODULE)
 	{
 		I2C_BOARD_INFO(TCM825X_NAME, TCM825X_I2C_ADDR),
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index e793ae7..d472da0 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -755,13 +755,11 @@ static int lm8323_probe(struct i2c_client *client,
 	if (init_pwm(lm, 3, &client->dev, lm8323_pdata->pwm3_name) < 0)
 		goto fail5;
 
-	lm->irq = lm8323_pdata->irq_gpio;
-	debug(&c->dev, "IRQ: %d\n", lm->irq);
-
+	lm->irq = client->irq;
 	mutex_init(&lm->lock);
 	INIT_WORK(&lm->work, lm8323_work);
 
-	err = request_irq(client->irq, lm8323_irq,
+	err = request_irq(lm->irq, lm8323_irq,
 			  IRQF_TRIGGER_FALLING | IRQF_DISABLED |
 			  IRQF_SAMPLE_RANDOM, DRIVER_NAME, lm);
 	if (err) {
@@ -802,7 +800,8 @@ static int lm8323_probe(struct i2c_client *client,
 		set_bit(EV_REP, idev->evbit);
 
 	lm->idev = idev;
-	if (input_register_device(idev)) {
+	err = input_register_device(idev);
+	if (err) {
 		dev_dbg(&client->dev, "error registering input device\n");
 		goto fail8;
 	}
@@ -833,7 +832,16 @@ static int lm8323_remove(struct i2c_client *client)
 	struct lm8323_chip *lm = i2c_get_clientdata(client);
 
 	free_irq(lm->irq, lm);
+	cancel_work_sync(&lm->work);
+	input_unregister_device(lm->idev);
 	device_remove_file(&lm->client->dev, &dev_attr_disable_kp);
+	if (lm->pwm3.enabled)
+		led_classdev_unregister(&lm->pwm3.cdev);
+	if (lm->pwm2.enabled)
+		led_classdev_unregister(&lm->pwm2.cdev);
+	if (lm->pwm1.enabled)
+		led_classdev_unregister(&lm->pwm1.cdev);
+	kfree(lm);
 
 	return 0;
 }
diff --git a/include/linux/i2c/lm8323.h b/include/linux/i2c/lm8323.h
index 5cb09ab..17d6b33 100644
--- a/include/linux/i2c/lm8323.h
+++ b/include/linux/i2c/lm8323.h
@@ -17,8 +17,6 @@
 #define LM8323_KEYMAP_SIZE (0x7f + 1)
 
 struct lm8323_platform_data {
-	u16 irq_gpio;
-
 	int debounce_time; /* Time to watch for key bouncing, in ms. */
 	int active_time; /* Idle time until sleep, in ms. */
 
-- 
1.5.3.6