From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
To: ext Tony Lindgren <tony@atomide.com>
Cc: "TK, Pratheesh Gangadhar" <pratheesh@ti.com>,
Koen Kooi <k.kooi@student.utwente.nl>,
linux-omap <linux-omap@vger.kernel.org>
Subject: Re: [PATCH 0/3] ARM: OMAP: SmartReflex driver
Date: Fri, 06 Jun 2008 12:49:40 +0300 [thread overview]
Message-ID: <1212745780.17269.56.camel@kj-ubuntu> (raw)
In-Reply-To: <20080603151044.GB6992@atomide.com>
Hi,
> > Tony, I can update this patch set, or send an additional patch that adds
> > the efuse support. Which will you prefer?
>
> Well I guess updating it would be better if it's just defining them so
> we have a working patch rather than patch and fix cycle.
It took a bit longer than I expected, but here's the updated
smartreflex driver that uses the E-fuse values. Thanks to Pratheesh for
helping out with the details of the implementation.
First patch remains as it was. Some new register and regbit defs have
been added to the second patch and the last patch now implements the
E-fuse parameters.
I also left in the software hard coded values under a "Smartreflex
testing support" entry in the Kconfig. For testing purposes only.
Again, tested on 3430SDP.
Regards,
Kalle
>
> Regards,
>
> Tony
>
>
>
>
> >
> >
> > Regards,
> > Kalle
> >
> >
> > > -----Original Message-----
> > > From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-owner@vger.kernel.org] On Behalf Of Koen Kooi
> > > Sent: Monday, June 02, 2008 6:02 PM
> > > To: Kalle Jokiniemi
> > > Cc: linux-omap
> > > Subject: Re: [PATCH 0/3] ARM: OMAP: SmartReflex driver
> > >
> > > -----BEGIN PGP SIGNED MESSAGE-----
> > > Hash: SHA1
> > >
> > >
> > > Op 2 jun 2008, om 13:29 heeft Kalle Jokiniemi het volgende geschreven:
> > >
> > > > Here is an updated version of the SmartReflex driver.
> > > >
> > > > Patches 1 and 2 are same as before, but patch 3 has some new things:
> > > >
> > > > - Changed the register accessing to use the prm_xxx_mod_reg{_bits}()
> > > > functions.
> > > >
> > > > - Created a Kconfig entry for SmartReflex in "System type->TI OMAP
> > > > Implementations" menu.
> > > >
> > > > Tested on 3430SDP.
> > >
> > > Compiles for beagleboard, but the board hangs after:
> > >
> > > echo -n 1 > /sys/power/sr_vdd1_autocomp
> > > echo -n 1 > /sys/power/sr_vdd2_autocomp
> > >
> > > But that's likely to be a beagleboard specific problem.
> > >
> > > regards,
> > >
> > > Koen
> > > -----BEGIN PGP SIGNATURE-----
> > > Version: GnuPG v1.4.5 (Darwin)
> > >
> > > iD8DBQFIQ+g/MkyGM64RGpERAqwgAJ97AE4z0bIBZJs7nZcO1Npa8YkIcgCfY6KM
> > > 3Hhr4AIdmzNiozdqs1uQUgg=
> > > =rcQP
> > > -----END PGP SIGNATURE-----
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-06-06 9:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-02 11:29 [PATCH 0/3] ARM: OMAP: SmartReflex driver Kalle Jokiniemi
2008-06-02 12:31 ` Koen Kooi
2008-06-02 14:58 ` TK, Pratheesh Gangadhar
2008-06-03 6:02 ` Kalle Jokiniemi
2008-06-03 8:24 ` TK, Pratheesh Gangadhar
2008-06-03 15:10 ` Tony Lindgren
2008-06-06 9:49 ` Kalle Jokiniemi [this message]
2008-06-06 11:01 ` Koen Kooi
-- strict thread matches above, loose matches on Subject: below --
2008-05-30 14:12 Kalle Jokiniemi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1212745780.17269.56.camel@kj-ubuntu \
--to=ext-kalle.jokiniemi@nokia.com \
--cc=k.kooi@student.utwente.nl \
--cc=linux-omap@vger.kernel.org \
--cc=pratheesh@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox