Re: Question regarding MUSB and dynamic fifo sizing

[Peter Barada <peterb@logicpd.com>]

On Tue, 2009-08-11 at 23:51 +0300, Felipe Balbi wrote:
> Hi,
> 
> On Tue, Aug 11, 2009 at 11:21:17AM -0400, Peter Barada wrote:
> > Unfortunately, with the patch, and:
> > 
> > 1) modprobe musb_hdrc
> > 2) modprobe g_ether
> > 3) connect micro-a cable
> > 4) echo 1 > /sys/devices/platform/musb_hdrc/connect
> > 
> > Nothing happens - no isr or output.
> 
> did you have anything at the other end of the micro-a cable ?

Not then. :)

I just connected my OTG adapter/thumbdrive,  in step three and nothing
no isr or output.

I know my OTG adapter (micro-a -> female A) is valid as I ohm'd out ID
and ground on the baseboard (with the SOM removed), and indeed ID is
shorted to ground with the adapter plugged in and open with it
removed...

-- 
Peter Barada <peterb@logicpd.com>
Logic Product Development, Inc.