linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: adharmap@codeaurora.org
To: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>,
	Ingo Molnar <mingo@elte.hu>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Yinghai Lu <yinghai@kernel.org>, Tony Lindgren <tony@atomide.com>,
	Santosh Shilimkar <santosh.shilimkar@ti.com>,
	Kevin Hilman <khilman@deeprootsystems.com>,
	Kalle Valo <kalle.valo@iki.fi>, Jean Pihet <jpihet@mvista.com>,
	Linus Walleij <linus.walleij@stericsson.com>,
	Colin Tuckley <colin.tuckley@arm.com>,
	Philby John <pjohn@in.mvista.com>,
	Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>,
	Alessandro Rubini <rubini@unipv.it>,
	Andrea Gallo <andrea.gallo@stericsson.com>,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	Abhijeet Dharmapurikar <adharmap@quicinc.com>
Subject: [PATCH 3/5] gic: Add set_type callback
Date: Wed, 27 Jan 2010 11:32:27 -0800	[thread overview]
Message-ID: <1264620749-24527-4-git-send-email-adharmap@codeaurora.org> (raw)
In-Reply-To: <1264620749-24527-1-git-send-email-adharmap@codeaurora.org>

From: Abhijeet Dharmapurikar <adharmap@quicinc.com>

Add gic_set_type callback to set an irq as level or edge triggered type

Signed-off-by: Abhijeet Dharmapurikar <adharmap@quicinc.com>
---
 arch/arm/common/gic.c |   43 +++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 43 insertions(+), 0 deletions(-)

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 00172c4..709cf53 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -165,6 +165,48 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	chip->unmask(irq);
 }
 
+static int gic_set_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned int register_index;
+	unsigned int bit_index;
+	unsigned int reg_value;
+
+	if (irq > 1020)
+		return -1;
+
+	/*
+	* Two bits each, calc the register and bit, 16 per 32 bit register
+	* accessible long word only
+	* But the field is NxN 1xN and rising/falling
+	*/
+	register_index = (irq/16)<<2;
+	bit_index = (irq & 0xF)<<1;
+
+	spin_lock(&irq_controller_lock);
+	reg_value = readl(gic_dist_base(irq) + GIC_DIST_CONFIG +
+						register_index);
+	/*
+	* keep the nxn and 1xn , mask the edge level
+	* Edge is 1, level 0
+	*/
+	reg_value = (reg_value & ~(2<<bit_index));
+	if (flow_type & (IRQ_TYPE_EDGE_RISING|IRQ_TYPE_EDGE_FALLING)) {
+		reg_value |= (2<<bit_index);
+		writel(reg_value, gic_dist_base(irq) + GIC_DIST_CONFIG
+							+ register_index);
+		__set_irq_handler_unlocked(irq, handle_edge_irq);
+	}
+
+	if (flow_type & (IRQ_TYPE_LEVEL_HIGH|IRQ_TYPE_LEVEL_LOW)) {
+		writel(reg_value, gic_dist_base(irq) + GIC_DIST_CONFIG
+							+ register_index);
+		__set_irq_handler_unlocked(irq, handle_level_irq);
+	}
+
+	spin_unlock(&irq_controller_lock);
+	return 0;
+}
+
 static struct irq_chip gic_chip = {
 	.name		= "GIC",
 	.ack		= gic_ack_irq,
@@ -174,6 +216,7 @@ static struct irq_chip gic_chip = {
 #ifdef CONFIG_SMP
 	.set_affinity	= gic_set_cpu,
 #endif
+	.set_type	= gic_set_type,
 };
 
 void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
-- 
1.5.6.3


  parent reply	other threads:[~2010-01-27 19:32 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-27 19:32 [PATCH 0/5] Arm Gic Changes adharmap
2010-01-27 19:32 ` [PATCH 1/5] gic: prevent gic from crossing NR_IRQ adharmap
2010-01-27 22:43   ` Russell King - ARM Linux
2010-01-28 13:19     ` Catalin Marinas
2010-01-27 19:32 ` [PATCH 2/5] gic: add callback for mask_ack adharmap
2010-01-27 19:32 ` adharmap [this message]
2010-01-27 23:09   ` [PATCH 3/5] gic: Add set_type callback Russell King - ARM Linux
2010-01-27 23:18   ` Russell King - ARM Linux
2010-01-28  1:43     ` Abhijeet Dharmapurikar
2010-05-07 10:56   ` Linus Walleij
2010-01-27 19:32 ` [PATCH 4/5] gic: dont disable INT in ack callback adharmap
2010-01-27 19:32 ` [RFC PATCH 5/5] gic: initialize interrupts as per argument adharmap
2010-01-27 23:29   ` Russell King - ARM Linux
2010-01-28  0:39 ` [PATCH 0/5] Arm Gic Changes Ben Dooks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1264620749-24527-4-git-send-email-adharmap@codeaurora.org \
    --to=adharmap@codeaurora.org \
    --cc=adharmap@quicinc.com \
    --cc=andrea.gallo@stericsson.com \
    --cc=catalin.marinas@arm.com \
    --cc=colin.tuckley@arm.com \
    --cc=jpihet@mvista.com \
    --cc=kalle.valo@iki.fi \
    --cc=khilman@deeprootsystems.com \
    --cc=linus.walleij@stericsson.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mingo@elte.hu \
    --cc=pjohn@in.mvista.com \
    --cc=rubini@unipv.it \
    --cc=santosh.shilimkar@ti.com \
    --cc=srinidhi.kasagar@stericsson.com \
    --cc=tony@atomide.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).