[PATCH v2 0/4] GIC Changes

[PATCH v2 0/4] GIC Changes

[adharmap]

From: Abhijeet Dharmapurikar <adharmap@quicinc.com>

Few fixes and improvements to arch/arm/common/gic.c file. 

Changes in v2

Russell indicated that there could be an on chip inteverter on some interrupt
lines and hence there is no way to enforce correct edge rising/falling or level
high/low configuration. The change to introduce set_type callback is dropped.

Also the change to configure SPI's and PPI's as level/edge  depending on the
flow_type argument passed in gic_dist_init is dropped. 

As per Catalin's suggestion all the interrupts reported by gic are
disabled. This way we initialize and disable all the unused interrupts.
The iterator,i in the gic_dist_init is still prevented from exceeding NR_IRQS.

As per Ben Dook's suggestion 'gic:...' is changed to 'GIC:...' in title.

Thanks for all your inputs. Please let me know if further changes are
required.

Abhijeet Dharmapurikar (4):
  GIC: Disable unused interrupts
  GIC: Prevent gic from crossing NR_IRQS
  GIC: Add callback for mask_ack
  GIC: Dont disable INT in ack callback

 arch/arm/common/gic.c |   56 +++++++++++++++++++++++++++++++++---------------
 1 files changed, 38 insertions(+), 18 deletions(-)

[PATCH v2 1/4] GIC: Disable unused interrupts

[adharmap]

From: Abhijeet Dharmapurikar <adharmap@quicinc.com>

Disable all interrupts of a gic in distributor initialization function.
This way interrupts beyond NR_IRQS stay disabled.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@quicinc.com>
---
 arch/arm/common/gic.c |   12 ++++++++----
 1 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 337741f..cd92ce0 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -175,6 +175,11 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
 	set_irq_chained_handler(irq, gic_handle_cascade_irq);
 }
 
+/*
+ * In case of multiple cascaded GICs, order calls to gic_dist_init with
+ * ascending irq_start
+ */
+
 void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 			  unsigned int irq_start)
 {
@@ -200,11 +205,10 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 
 	/*
 	 * The GIC only supports up to 1020 interrupt sources.
-	 * Limit this to either the architected maximum, or the
-	 * platform maximum.
+	 * Limit this to either the architected maximum
 	 */
-	if (max_irq > max(1020, NR_IRQS))
-		max_irq = max(1020, NR_IRQS);
+	if (max_irq > 1020)
+		max_irq = 1020;
 
 	/*
 	 * Set all global interrupts to be level triggered, active low.
-- 
1.5.6.3

[PATCH v2 2/4] GIC: Prevent gic from crossing NR_IRQS

[adharmap]

From: Abhijeet Dharmapurikar <adharmap@quicinc.com>

Prevent gic code from initializing interrupts beyon NR_IRQS.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@quicinc.com>
---
 arch/arm/common/gic.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index cd92ce0..8a2bfae 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -237,7 +237,8 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 	/*
 	 * Setup the Linux IRQ subsystem.
 	 */
-	for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
+	for (i = irq_start;
+		i < NR_IRQS && i < gic_data[gic_nr].irq_offset + max_irq; i++) {
 		set_irq_chip(i, &gic_chip);
 		set_irq_chip_data(i, &gic_data[gic_nr]);
 		set_irq_handler(i, handle_level_irq);
-- 
1.5.6.3

[PATCH v2 3/4] GIC: Add callback for mask_ack

[adharmap]

From: Abhijeet Dharmapurikar <adharmap@quicinc.com>

Add gic_mask_ack for faster processing of interrupts.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@quicinc.com>
---
 arch/arm/common/gic.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 8a2bfae..240f6b6 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -108,6 +108,15 @@ static void gic_unmask_irq(unsigned int irq)
 	spin_unlock(&irq_controller_lock);
 }
 
+static void gic_mask_ack_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq % 32);
+	spin_lock(&irq_controller_lock);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
+	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
+	spin_unlock(&irq_controller_lock);
+}
+
 #ifdef CONFIG_SMP
 static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
@@ -160,6 +169,7 @@ static struct irq_chip gic_chip = {
 	.name		= "GIC",
 	.ack		= gic_ack_irq,
 	.mask		= gic_mask_irq,
+	.mask_ack	= gic_mask_ack_irq,
 	.unmask		= gic_unmask_irq,
 #ifdef CONFIG_SMP
 	.set_affinity	= gic_set_cpu,
-- 
1.5.6.3

[PATCH v2 4/4] GIC: Dont disable INT in ack callback

[adharmap]

From: Abhijeet Dharmapurikar <adharmap@quicinc.com>

Unless gic_ack_irq is called from __do_IRQ, interrupt should not
be disabled in the ack function. Disabling the interrupt causes
handle_edge_irq to never enable it again.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@quicinc.com>
---
 arch/arm/common/gic.c |   31 ++++++++++++++++++-------------
 1 files changed, 18 insertions(+), 13 deletions(-)

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 240f6b6..f44167c 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -67,25 +67,30 @@ static inline unsigned int gic_irq(unsigned int irq)
 
 /*
  * Routines to acknowledge, disable and enable interrupts
- *
- * Linux assumes that when we're done with an interrupt we need to
- * unmask it, in the same way we need to unmask an interrupt when
- * we first enable it.
- *
- * The GIC has a separate notion of "end of interrupt" to re-enable
- * an interrupt after handling, in order to support hardware
- * prioritisation.
- *
- * We can make the GIC behave in the way that Linux expects by making
- * our "acknowledge" routine disable the interrupt, then mark it as
- * complete.
  */
 static void gic_ack_irq(unsigned int irq)
 {
-	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
+
+#ifndef CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ
+	u32 mask = 1 << (irq % 32);
+
+	 /*
+	  * Linux assumes that when we're done with an interrupt we need to
+	  * unmask it, in the same way we need to unmask an interrupt when
+	  * we first enable it.
+	  *
+	  * The GIC has a separate notion of "end of interrupt" to re-enable
+	  * an interrupt after handling, in order to support hardware
+	  * prioritisation.
+	  *
+	  * We can make the GIC behave in the way that Linux expects by making
+	  * our "acknowledge" routine disable the interrupt, then mark it as
+	  * complete.
+	  */
 	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
+#endif
 	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
 	spin_unlock(&irq_controller_lock);
 }
-- 
1.5.6.3