From: Cory Maccarrone <darkstar6262@gmail.com>
To: linux-mmc@vger.kernel.org, akpm@linux-foundation.org
Cc: Ladislav Michl <ladis@linux-mips.org>,
linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>,
Marek Belisko <marek.belisko@open-nandra.com>,
Cory Maccarrone <darkstar6262@gmail.com>
Subject: [PATCH] mmc-omap: Add support for 16-bit and 32-bit registers
Date: Sun, 7 Mar 2010 09:47:58 -0800 [thread overview]
Message-ID: <1267984078-6036-1-git-send-email-darkstar6262@gmail.com> (raw)
From: Marek Belisko <marek.belisko@open-nandra.com>
The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
a modification of the register addresses in the mmc-omap driver. To resolve
this, a bit shift is performed on base register addresses, either by 1 or 2
bits depending on the CPU in use. This yields the correct registers for
each CPU.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/mmc/host/omap.c | 62 +++++++++++++++++++++++++----------------------
1 files changed, 33 insertions(+), 29 deletions(-)
This is a resubmit of a patch I sent in several months ago. Tony Lindgren merged
this into linux-omap's master and testing branches but has stated that he will not
merge it further as linux-mmc needs to approve this. There hasn't been any comments
raised on either of the linux-omap or linux-mmc mailing lists about problems. Due to
the unique nature of the omap7xx platform, this patch is required for MMC card access.
Is there any chance this can be included into the next -rc cycle, as it is a fix for
devices that have 16-bit registers?
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index c6d7e8e..53362c4 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -38,30 +38,30 @@
#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
-#define OMAP_MMC_REG_ARGL 0x04
-#define OMAP_MMC_REG_ARGH 0x08
-#define OMAP_MMC_REG_CON 0x0c
-#define OMAP_MMC_REG_STAT 0x10
-#define OMAP_MMC_REG_IE 0x14
-#define OMAP_MMC_REG_CTO 0x18
-#define OMAP_MMC_REG_DTO 0x1c
-#define OMAP_MMC_REG_DATA 0x20
-#define OMAP_MMC_REG_BLEN 0x24
-#define OMAP_MMC_REG_NBLK 0x28
-#define OMAP_MMC_REG_BUF 0x2c
-#define OMAP_MMC_REG_SDIO 0x34
-#define OMAP_MMC_REG_REV 0x3c
-#define OMAP_MMC_REG_RSP0 0x40
-#define OMAP_MMC_REG_RSP1 0x44
-#define OMAP_MMC_REG_RSP2 0x48
-#define OMAP_MMC_REG_RSP3 0x4c
-#define OMAP_MMC_REG_RSP4 0x50
-#define OMAP_MMC_REG_RSP5 0x54
-#define OMAP_MMC_REG_RSP6 0x58
-#define OMAP_MMC_REG_RSP7 0x5c
-#define OMAP_MMC_REG_IOSR 0x60
-#define OMAP_MMC_REG_SYSC 0x64
-#define OMAP_MMC_REG_SYSS 0x68
+#define OMAP_MMC_REG_ARGL 0x01
+#define OMAP_MMC_REG_ARGH 0x02
+#define OMAP_MMC_REG_CON 0x03
+#define OMAP_MMC_REG_STAT 0x04
+#define OMAP_MMC_REG_IE 0x05
+#define OMAP_MMC_REG_CTO 0x06
+#define OMAP_MMC_REG_DTO 0x07
+#define OMAP_MMC_REG_DATA 0x08
+#define OMAP_MMC_REG_BLEN 0x09
+#define OMAP_MMC_REG_NBLK 0x0a
+#define OMAP_MMC_REG_BUF 0x0b
+#define OMAP_MMC_REG_SDIO 0x0d
+#define OMAP_MMC_REG_REV 0x0f
+#define OMAP_MMC_REG_RSP0 0x10
+#define OMAP_MMC_REG_RSP1 0x11
+#define OMAP_MMC_REG_RSP2 0x12
+#define OMAP_MMC_REG_RSP3 0x13
+#define OMAP_MMC_REG_RSP4 0x14
+#define OMAP_MMC_REG_RSP5 0x15
+#define OMAP_MMC_REG_RSP6 0x16
+#define OMAP_MMC_REG_RSP7 0x17
+#define OMAP_MMC_REG_IOSR 0x18
+#define OMAP_MMC_REG_SYSC 0x19
+#define OMAP_MMC_REG_SYSS 0x1a
#define OMAP_MMC_STAT_CARD_ERR (1 << 14)
#define OMAP_MMC_STAT_CARD_IRQ (1 << 13)
@@ -77,8 +77,9 @@
#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
-#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG_##reg)
-#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG_##reg)
+#define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift)
+#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
+#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
/*
* Command types
@@ -132,6 +133,7 @@ struct mmc_omap_host {
int irq;
unsigned char bus_mode;
unsigned char hw_bus_mode;
+ unsigned int reg_shift;
struct work_struct cmd_abort_work;
unsigned abort:1;
@@ -679,9 +681,9 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
host->data->bytes_xfered += n;
if (write) {
- __raw_writesw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
+ __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
} else {
- __raw_readsw(host->virt_base + OMAP_MMC_REG_DATA, host->buffer, n);
+ __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
}
}
@@ -899,7 +901,7 @@ mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
int dst_port = 0;
int sync_dev = 0;
- data_addr = host->phys_base + OMAP_MMC_REG_DATA;
+ data_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
frame = data->blksz;
count = sg_dma_len(sg);
@@ -1492,6 +1494,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
}
}
+ host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+
return 0;
err_plat_cleanup:
--
1.6.3.3
next reply other threads:[~2010-03-07 17:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-07 17:47 Cory Maccarrone [this message]
2010-03-07 22:59 ` [PATCH] mmc-omap: Add support for 16-bit and 32-bit registers Ben Dooks
2010-03-08 0:16 ` Cory Maccarrone
2010-03-08 10:04 ` Ben Dooks
2010-05-13 19:29 ` Tony Lindgren
2010-05-13 19:41 ` Andrew Morton
2010-05-13 19:49 ` Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2009-11-15 3:24 [PATCH] [mmc-omap] " Cory Maccarrone
2009-11-18 18:41 ` Ladislav Michl
2009-11-18 21:09 ` Cory Maccarrone
2009-11-18 23:35 ` Ladislav Michl
2009-10-03 21:57 Cory Maccarrone
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1267984078-6036-1-git-send-email-darkstar6262@gmail.com \
--to=darkstar6262@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=ladis@linux-mips.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=marek.belisko@open-nandra.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).