[PATCH 1/3] OMAP3: PM: Bug fix in Smartreflex driver.

[Thara Gopinath <thara@ti.com>]

This patch sets and unsets is_sr_reset is appropriate places so that
trying to enable smart reflex in a non-supported OMAP chip does not
lead to unnecessary crash

Signed-off-by: Thara Gopinath <thara@ti.com>
---
 arch/arm/mach-omap2/smartreflex.c |   31 +++++++++++++++++++++----------
 1 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index ca2223d..7aa84ab 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -108,9 +108,14 @@ static int sr_clk_enable(struct omap_sr *sr)
 {
 	struct omap_smartreflex_data *pdata = sr->pdev->dev.platform_data;
 
+	if (!sr->is_sr_reset)
+		return 0;
+
 	if (pdata->device_enable)
 		pdata->device_enable(sr->pdev);
 
+	sr->is_sr_reset = 0;
+
 	return 0;
 }
 
@@ -118,6 +123,9 @@ static void sr_clk_disable(struct omap_sr *sr)
 {
 	struct omap_smartreflex_data *pdata = sr->pdev->dev.platform_data;
 
+	if (sr->is_sr_reset)
+		return;
+
 	if (pdata->device_idle)
 		pdata->device_idle(sr->pdev);
 
@@ -262,7 +270,6 @@ static void sr_configure(struct omap_sr *sr)
 			 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
 			 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
 	}
-	sr->is_sr_reset = 0;
 }
 
 static void sr_start_vddautocomap(int srid)
@@ -283,8 +290,7 @@ static void sr_start_vddautocomap(int srid)
 	sr->is_autocomp_active = 1;
 	if (!sr_class->enable(srid)) {
 		sr->is_autocomp_active = 0;
-		if (sr->is_sr_reset == 1)
-			sr_clk_disable(sr);
+		sr_clk_disable(sr);
 	}
 }
 
@@ -303,8 +309,10 @@ static void sr_stop_vddautocomap(int srid)
 	}
 
 	if (sr->is_autocomp_active == 1) {
-		sr_class->disable(srid);
-		sr_clk_disable(sr);
+		if (!sr->is_sr_reset) {
+			sr_class->disable(srid);
+			sr_clk_disable(sr);
+		}
 		sr->is_autocomp_active = 0;
 	}
 
@@ -357,6 +365,11 @@ int sr_enable(int srid, u32 target_opp_no)
 
 	/* Enable the clocks and configure SR */
 	sr_clk_enable(sr);
+
+	/* Check if SR is already enabled. If yes do nothing */
+	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
+		return true;
+
 	sr_configure(sr);
 
 	nvalue_reciprocal = pdata->sr_nvalue[target_opp_no - 1];
@@ -447,10 +460,8 @@ void omap_smartreflex_enable(int srid)
 	}
 
 	if (sr->is_autocomp_active == 1) {
-		if (sr->is_sr_reset == 1) {
-			if (!sr_class->enable(srid))
-				sr_clk_disable(sr);
-		}
+		if (!sr_class->enable(srid))
+			sr_clk_disable(sr);
 	}
 }
 
@@ -478,7 +489,7 @@ void omap_smartreflex_disable(int srid)
 	}
 
 	if (sr->is_autocomp_active == 1) {
-		if (sr->is_sr_reset == 0) {
+		if (!sr->is_sr_reset) {
 			sr_class->disable(srid);
 			/* Disable SR clk */
 			sr_clk_disable(sr);
-- 
1.7.0.rc1.33.g07cf0f