From: Thara Gopinath <thara@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@deeprootsystems.com, paul@pwsan.com, nm@ti.com,
b-cousson@ti.com, vishwanath.bs@ti.com, sawant@ti.com,
Thara Gopinath <thara@ti.com>
Subject: [PATCHv2 06/17] OMAP3: PM: Correcting API names in samrtreflex driver.
Date: Thu, 18 Mar 2010 14:45:44 +0530 [thread overview]
Message-ID: <1268903755-4151-7-git-send-email-thara@ti.com> (raw)
In-Reply-To: <1268903755-4151-6-git-send-email-thara@ti.com>
This patch corrects typo in some of the API names in smartreflex driver.
Signed-off-by: Thara Gopinath <thara@ti.com>
---
arch/arm/mach-omap2/pm34xx.c | 8 ++++----
arch/arm/mach-omap2/smartreflex.c | 26 +++++++++++++-------------
arch/arm/mach-omap2/smartreflex.h | 8 ++++----
3 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index b51b461..9777ab2 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -430,9 +430,9 @@ void omap_sram_idle(void)
* Only needed if we are going to enter retention or off.
*/
if (mpu_next_state <= PWRDM_POWER_RET)
- disable_smartreflex(SR1);
+ omap_smartreflex_disable(SR1);
if (core_next_state <= PWRDM_POWER_RET)
- disable_smartreflex(SR2);
+ omap_smartreflex_disable(SR2);
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
@@ -531,9 +531,9 @@ void omap_sram_idle(void)
* retention or off
*/
if (mpu_next_state <= PWRDM_POWER_RET)
- enable_smartreflex(SR1);
+ omap_smartreflex_enable(SR1);
if (core_next_state <= PWRDM_POWER_RET)
- enable_smartreflex(SR2);
+ omap_smartreflex_enable(SR2);
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 5ea671b..c0345e7 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -537,7 +537,7 @@ static void sr_disable(struct omap_sr *sr)
}
-void sr_start_vddautocomap(int srid, unsigned long volt)
+void sr_start_vddautocomp(int srid, unsigned long volt)
{
struct omap_sr *sr = _sr_lookup(srid);
@@ -559,9 +559,9 @@ void sr_start_vddautocomap(int srid, unsigned long volt)
sr_clk_disable(sr);
}
}
-EXPORT_SYMBOL(sr_start_vddautocomap);
+EXPORT_SYMBOL(sr_start_vddautocomp);
-int sr_stop_vddautocomap(int srid)
+int sr_stop_vddautocomp(int srid)
{
struct omap_sr *sr = _sr_lookup(srid);
@@ -582,9 +582,9 @@ int sr_stop_vddautocomap(int srid)
return false;
}
-EXPORT_SYMBOL(sr_stop_vddautocomap);
+EXPORT_SYMBOL(sr_stop_vddautocomp);
-void enable_smartreflex(int srid)
+void omap_smartreflex_enable(int srid)
{
unsigned long curr_volt = 0;
struct omap_sr *sr = _sr_lookup(srid);
@@ -618,7 +618,7 @@ void enable_smartreflex(int srid)
}
}
-void disable_smartreflex(int srid)
+void omap_smartreflex_disable(int srid)
{
u32 i = 0;
struct omap_sr *sr = _sr_lookup(srid);
@@ -693,7 +693,7 @@ int sr_voltagescale_vcbypass(u32 target_opp, u32 current_opp,
current_opp_no = get_opp_no(current_opp);
if (vdd == VDD1_OPP) {
- sr_status = sr_stop_vddautocomap(SR1);
+ sr_status = sr_stop_vddautocomp(SR1);
t2_smps_steps = abs(target_vsel - current_vsel);
prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
@@ -703,7 +703,7 @@ int sr_voltagescale_vcbypass(u32 target_opp, u32 current_opp,
reg_addr = R_VDD1_SR_CONTROL;
} else if (vdd == VDD2_OPP) {
- sr_status = sr_stop_vddautocomap(SR2);
+ sr_status = sr_stop_vddautocomp(SR2);
t2_smps_steps = abs(target_vsel - current_vsel);
prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
@@ -751,9 +751,9 @@ int sr_voltagescale_vcbypass(u32 target_opp, u32 current_opp,
volt = (target_vsel * 12500) + 600000;
if (vdd == VDD1_OPP)
- sr_start_vddautocomap(SR1, volt);
+ sr_start_vddautocomp(SR1, volt);
else if (vdd == VDD2_OPP)
- sr_start_vddautocomap(SR2, volt);
+ sr_start_vddautocomp(SR2, volt);
}
return 0;
@@ -784,7 +784,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
return 0;
}
if (val == 0) {
- sr_stop_vddautocomap(sr_info->srid);
+ sr_stop_vddautocomp(sr_info->srid);
} else {
unsigned long curr_volt;
@@ -792,7 +792,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
curr_volt = get_curr_vdd1_voltage();
else
curr_volt = get_curr_vdd2_voltage();
- sr_start_vddautocomap(sr_info->srid, curr_volt);
+ sr_start_vddautocomp(sr_info->srid, curr_volt);
}
return 0;
}
@@ -839,7 +839,7 @@ static int __devexit omap_smartreflex_remove(struct platform_device *pdev)
/* Disable Autocompensation if enabled before removing the module */
if (sr_info->is_autocomp_active == 1)
- sr_stop_vddautocomap(sr_info->srid);
+ sr_stop_vddautocomp(sr_info->srid);
list_del(&sr_info->node);
kfree(sr_info);
diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
index cab66a4..365a21d 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/arch/arm/mach-omap2/smartreflex.h
@@ -286,11 +286,11 @@ struct omap_smartreflex_data {
int (*device_idle)(struct platform_device *pdev);
};
-void enable_smartreflex(int srid);
-void disable_smartreflex(int srid);
+void omap_smartreflex_enable(int srid);
+void omap_smartreflex_disable(int srid);
int sr_voltagescale_vcbypass(u32 t_opp, u32 c_opp, u8 t_vsel, u8 c_vsel);
-void sr_start_vddautocomap(int srid, unsigned long volt);
-int sr_stop_vddautocomap(int srid);
+void sr_start_vddautocomp(int srid, unsigned long volt);
+int sr_stop_vddautocomp(int srid);
#else
static inline void enable_smartreflex(int srid) {}
static inline void disable_smartreflex(int srid) {}
--
1.7.0.rc1.33.g07cf0f
next prev parent reply other threads:[~2010-03-18 9:16 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-18 9:15 [PATCHv2 00/17] OMAP3: PM: Smartreflex and voltage revamp Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 01/17] OMAP3: PM: Adding hwmod data for Smartreflex Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 02/17] OMAP3: PM: Create list to keep track of various smartreflex instances Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 03/17] OMAP3: PM: Convert smartreflex driver into a platform driver using hwmods and omap-device layer Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 04/17] OMAP3: PM: Move smartreflex autocompensation enable disable hooks to PM debugfs Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 05/17] OMAP3: PM: Remove OPP id dependency from smartreflex driver Thara Gopinath
2010-03-18 9:15 ` Thara Gopinath [this message]
2010-03-18 9:15 ` [PATCHv2 07/17] OMAP3: PM: Smartreflex class related changes for smartreflex.c Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 08/17] OMAP3: PM: Adding smartreflex class 3 driver Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 09/17] OMAP3: PM: Creating separate files for handling OMAP3 voltage related operations Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 10/17] OMAP3: PM: Disabling Smartreflex across both frequency and voltage scaling during DVFS Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 11/17] OMAP3: PM: Cleaning up of smartreflex header file Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 12/17] OMAP3: PM: Configurations for Smartreflex Class 2 and Smartreflex Class 3 Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 13/17] OMAP3: PM: Support for enabling smartreflex autocompensation by default Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 14/17] OMAP3: PM: Correcting accessing of ERRCONFIG register in smartreflex.c Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 15/17] OMAP3: PM: Implement latest h/w recommendations for SR and VP registers and SR VP enable disable sequence Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 16/17] OMAP3: PM: VP force update method of voltage scaling Thara Gopinath
2010-03-18 9:15 ` [PATCHv2 17/17] OMAP3: PM: Enabling Smartreflex Class 3 driver by default in pm defconfig Thara Gopinath
2010-03-22 18:28 ` [PATCHv2 03/17] OMAP3: PM: Convert smartreflex driver into a platform driver using hwmods and omap-device layer Nishanth Menon
2010-03-22 18:07 ` [PATCHv2 01/17] OMAP3: PM: Adding hwmod data for Smartreflex Paul Walmsley
2010-03-18 19:15 ` [PATCHv2 00/17] OMAP3: PM: Smartreflex and voltage revamp Nishanth Menon
2010-03-22 14:39 ` Gopinath, Thara
2010-03-22 15:41 ` Nishanth Menon
2010-03-22 16:50 ` Kevin Hilman
2010-03-22 16:54 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1268903755-4151-7-git-send-email-thara@ti.com \
--to=thara@ti.com \
--cc=b-cousson@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=paul@pwsan.com \
--cc=sawant@ti.com \
--cc=vishwanath.bs@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox