From: Charulatha V <charu@ti.com>
To: linux-omap@vger.kernel.org
Cc: rnayak@ti.com, paul@pwsan.com, tony@atomide.com,
khilman@deeprootsystems.com, Charulatha V <charu@ti.com>
Subject: [PATCH 6/9] OMAP:GPIO:hwmod: add GPIO hwmods for OMAP3
Date: Thu, 22 Apr 2010 21:25:17 +0530 [thread overview]
Message-ID: <1271951720-21714-7-git-send-email-charu@ti.com> (raw)
In-Reply-To: <1271951720-21714-6-git-send-email-charu@ti.com>
Add hwmod structures for GPIO module on OMAP3
Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 346 +++++++++++++++++++++++++++-
1 files changed, 345 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 5f74c34..6124d62 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -20,6 +20,7 @@
#include <plat/serial.h>
#include <plat/l4_3xxx.h>
#include <plat/mmc.h>
+#include <plat/gpio.h>
#include "omap_hwmod_common_data.h"
@@ -89,6 +90,12 @@ static struct omap_hwmod omap3xxx_uart3_hwmod;
static struct omap_hwmod omap3xxx_mmc1_hwmod;
static struct omap_hwmod omap3xxx_mmc2_hwmod;
static struct omap_hwmod omap3xxx_mmc3_hwmod;
+static struct omap_hwmod omap3xxx_gpio1_hwmod;
+static struct omap_hwmod omap3xxx_gpio2_hwmod;
+static struct omap_hwmod omap3xxx_gpio3_hwmod;
+static struct omap_hwmod omap3xxx_gpio4_hwmod;
+static struct omap_hwmod omap3xxx_gpio5_hwmod;
+static struct omap_hwmod omap3xxx_gpio6_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
@@ -226,6 +233,114 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = {
.flags = OMAP_FIREWALL_L4
};
+/* L4 WKUP -> GPIO1 interface */
+static struct omap_hwmod_addr_space omap3xxx_gpio1_addr_space[] = {
+ {
+ .pa_start = OMAP34XX_GPIO1_BASE,
+ .pa_end = OMAP34XX_GPIO1_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
+ .master = &omap3xxx_l4_wkup_hwmod,
+ .slave = &omap3xxx_gpio1_hwmod,
+ .clk = "gpio1_ick",
+ .addr = omap3xxx_gpio1_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_gpio1_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> GPIO2 interface */
+static struct omap_hwmod_addr_space omap3xxx_gpio2_addr_space[] = {
+ {
+ .pa_start = OMAP34XX_GPIO2_BASE,
+ .pa_end = OMAP34XX_GPIO2_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio2_hwmod,
+ .clk = "gpio2_ick",
+ .addr = omap3xxx_gpio2_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_gpio2_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> GPIO3 interface */
+static struct omap_hwmod_addr_space omap3xxx_gpio3_addr_space[] = {
+ {
+ .pa_start = OMAP34XX_GPIO3_BASE,
+ .pa_end = OMAP34XX_GPIO3_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio3_hwmod,
+ .clk = "gpio3_ick",
+ .addr = omap3xxx_gpio3_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_gpio3_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> GPIO4 interface */
+static struct omap_hwmod_addr_space omap3xxx_gpio4_addr_space[] = {
+ {
+ .pa_start = OMAP34XX_GPIO4_BASE,
+ .pa_end = OMAP34XX_GPIO4_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio4_hwmod,
+ .clk = "gpio4_ick",
+ .addr = omap3xxx_gpio4_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_gpio4_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> GPIO5 interface */
+static struct omap_hwmod_addr_space omap3xxx_gpio5_addr_space[] = {
+ {
+ .pa_start = OMAP34XX_GPIO5_BASE,
+ .pa_end = OMAP34XX_GPIO5_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio5_hwmod,
+ .clk = "gpio5_ick",
+ .addr = omap3xxx_gpio5_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_gpio5_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> GPIO6 interface */
+static struct omap_hwmod_addr_space omap3xxx_gpio6_addr_space[] = {
+ {
+ .pa_start = OMAP34XX_GPIO6_BASE,
+ .pa_end = OMAP34XX_GPIO6_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio6_hwmod,
+ .clk = "gpio6_ick",
+ .addr = omap3xxx_gpio6_addr_space,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_gpio6_addr_space),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
&omap3xxx_l3__l4_core,
@@ -257,6 +372,11 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
/* Master interfaces on the L4_PER interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = {
&omap3_l4_per__uart3,
+ &omap3xxx_l4_per__gpio2,
+ &omap3xxx_l4_per__gpio3,
+ &omap3xxx_l4_per__gpio4,
+ &omap3xxx_l4_per__gpio5,
+ &omap3xxx_l4_per__gpio6,
};
/* L4 PER */
@@ -273,10 +393,12 @@ static struct omap_hwmod omap3xxx_l4_per_hwmod = {
/* Slave interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_slaves[] = {
&omap3xxx_l4_core__l4_wkup,
+ &omap3xxx_l4_wkup__gpio1,
};
/* Master interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_masters[] = {
+ &omap3xxx_l4_wkup__gpio1,
};
/* L4 WKUP */
@@ -442,7 +564,6 @@ static struct omap_hwmod_class mmc_class = {
.sysc = &mmc_sysc,
};
-
/* MMC/SD/SDIO1 */
static struct mmc_dev_attr mmc1_dev_attr = {
@@ -576,6 +697,223 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
+/* GPIO common */
+
+static struct omap_hwmod_class_sysconfig gpio_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class gpio_class = {
+ .name = "gpio",
+ .sysc = &gpio_sysc,
+};
+
+/* GPIO1 */
+
+static struct omap_hwmod_irq_info gpio1_mpu_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_34XX_GPIO_BANK1 },
+};
+
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+ { .role = "gpio1_dbclk", .clk = "gpio1_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
+ &omap3xxx_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap3xxx_gpio1_hwmod = {
+ .name = "gpio1_hwmod",
+ .mpu_irqs = gpio1_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(gpio1_mpu_irqs),
+ .main_clk = NULL,
+ .opt_clks = gpio1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPIO1_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_gpio1_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves),
+ .class = &gpio_class,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* GPIO2 */
+
+static struct omap_hwmod_irq_info gpio2_mpu_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_34XX_GPIO_BANK2 },
+};
+
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+ { .role = "gpio2_dbclk", .clk = "gpio2_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
+ &omap3xxx_l4_per__gpio2,
+};
+
+static struct omap_hwmod omap3xxx_gpio2_hwmod = {
+ .name = "gpio2_hwmod",
+ .mpu_irqs = gpio2_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(gpio2_mpu_irqs),
+ .main_clk = NULL,
+ .opt_clks = gpio2_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPIO2_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_gpio2_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves),
+ .class = &gpio_class,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* GPIO3 */
+
+static struct omap_hwmod_irq_info gpio3_mpu_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_34XX_GPIO_BANK3 },
+};
+
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+ { .role = "gpio3_dbclk", .clk = "gpio3_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
+ &omap3xxx_l4_per__gpio3,
+};
+
+static struct omap_hwmod omap3xxx_gpio3_hwmod = {
+ .name = "gpio3_hwmod",
+ .mpu_irqs = gpio3_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(gpio3_mpu_irqs),
+ .main_clk = NULL,
+ .opt_clks = gpio3_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPIO3_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_gpio3_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves),
+ .class = &gpio_class,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* GPIO4 */
+
+static struct omap_hwmod_irq_info gpio4_mpu_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_34XX_GPIO_BANK4 },
+};
+
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+ { .role = "gpio4_dbclk", .clk = "gpio4_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
+ &omap3xxx_l4_per__gpio4,
+};
+
+static struct omap_hwmod omap3xxx_gpio4_hwmod = {
+ .name = "gpio4_hwmod",
+ .mpu_irqs = gpio4_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(gpio4_mpu_irqs),
+ .main_clk = NULL,
+ .opt_clks = gpio4_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPIO4_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_gpio4_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves),
+ .class = &gpio_class,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+
+/* GPIO5 */
+
+static struct omap_hwmod_irq_info gpio5_mpu_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_34XX_GPIO_BANK5 },
+};
+
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+ { .role = "gpio5_dbclk", .clk = "gpio5_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
+ &omap3xxx_l4_per__gpio5,
+};
+
+static struct omap_hwmod omap3xxx_gpio5_hwmod = {
+ .name = "gpio5_hwmod",
+ .mpu_irqs = gpio5_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(gpio5_mpu_irqs),
+ .main_clk = NULL,
+ .opt_clks = gpio5_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPIO5_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_gpio5_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves),
+ .class = &gpio_class,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* GPIO6 */
+
+static struct omap_hwmod_irq_info gpio6_mpu_irqs[] = {
+ { .name = "gpio_mpu_irq", .irq = INT_34XX_GPIO_BANK6 },
+};
+
+static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
+ { .role = "gpio6_dbclk", .clk = "gpio6_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
+ &omap3xxx_l4_per__gpio6,
+};
+
+static struct omap_hwmod omap3xxx_gpio6_hwmod = {
+ .name = "gpio6_hwmod",
+ .mpu_irqs = gpio6_mpu_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(gpio6_mpu_irqs),
+ .main_clk = NULL,
+ .opt_clks = gpio6_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPIO6_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_gpio6_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves),
+ .class = &gpio_class,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_l3_hwmod,
&omap3xxx_l4_core_hwmod,
@@ -588,6 +926,12 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_mmc1_hwmod,
&omap3xxx_mmc2_hwmod,
&omap3xxx_mmc3_hwmod,
+ &omap3xxx_gpio1_hwmod,
+ &omap3xxx_gpio2_hwmod,
+ &omap3xxx_gpio3_hwmod,
+ &omap3xxx_gpio4_hwmod,
+ &omap3xxx_gpio5_hwmod,
+ &omap3xxx_gpio6_hwmod,
NULL,
};
--
1.6.3.3
next prev parent reply other threads:[~2010-04-22 15:55 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-22 15:55 [PATCH 00/09] OMAP:GPIO:Implement GPIO in HWMOD way Charulatha V
2010-04-22 15:55 ` [PATCH 1/9] OMAP:GPIO: Modify init() in preparation for platform device implementation Charulatha V
2010-04-22 15:55 ` [PATCH 2/9] OMAP:GPIO: Introduce support for OMAP15xx chip specific GPIO Charulatha V
2010-04-22 15:55 ` [PATCH 3/9] OMAP:GPIO: Introduce support for OMAP16xx " Charulatha V
2010-04-22 15:55 ` [PATCH 4/9] OMAP:GPIO: Introduce support for OMAP7xx " Charulatha V
2010-04-22 15:55 ` [PATCH 5/9] OMAP:GPIO: Introduce support for OMAP2PLUS " Charulatha V
2010-04-22 15:55 ` Charulatha V [this message]
2010-04-22 15:55 ` [PATCH 7/9] OMAP:GPIO:hwmod: add GPIO hwmods for OMAP2420 Charulatha V
2010-04-22 15:55 ` [PATCH 8/9] OMAP:GPIO:hwmod: add GPIO hwmods for OMAP2430 Charulatha V
2010-04-22 15:55 ` [PATCH 9/9] OMAP:GPIO: Implement GPIO as a platform device Charulatha V
2010-05-01 0:04 ` Kevin Hilman
2010-05-04 15:59 ` Varadarajan, Charulatha
2010-05-05 20:59 ` Kevin Hilman
2010-05-05 22:37 ` Tony Lindgren
2010-05-07 6:52 ` Varadarajan, Charulatha
2010-05-12 12:29 ` Varadarajan, Charulatha
2010-05-12 14:47 ` Kevin Hilman
2010-05-20 10:13 ` [PATCH 6/9] OMAP:GPIO:hwmod: add GPIO hwmods for OMAP3 Benoit Cousson
2010-05-20 10:16 ` Varadarajan, Charulatha
2010-04-30 23:03 ` [PATCH 5/9] OMAP:GPIO: Introduce support for OMAP2PLUS chip specific GPIO Kevin Hilman
2010-05-04 15:59 ` Varadarajan, Charulatha
2010-05-11 14:43 ` Varadarajan, Charulatha
2010-05-11 15:25 ` Kevin Hilman
2010-05-05 22:31 ` Tony Lindgren
2010-05-07 6:52 ` Varadarajan, Charulatha
2010-05-12 12:29 ` Varadarajan, Charulatha
2010-05-12 14:49 ` Kevin Hilman
2010-05-07 6:57 ` [PATCH 00/09] OMAP:GPIO:Implement GPIO in HWMOD way Varadarajan, Charulatha
2010-05-07 15:32 ` Tony Lindgren
2010-05-10 15:14 ` Kevin Hilman
2010-05-10 22:22 ` Tony Lindgren
2010-05-11 15:21 ` Kevin Hilman
2010-05-11 15:54 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1271951720-21714-7-git-send-email-charu@ti.com \
--to=charu@ti.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).