From: Ajay Kumar Gupta <ajay.gupta-l0cyMroinI0@public.gmane.org>
To: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ajay Kumar Gupta <ajay.gupta-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 1/5] musb: save OTG base physical address
Date: Wed, 12 May 2010 17:19:35 +0530 [thread overview]
Message-ID: <1273664979-493-1-git-send-email-ajay.gupta@ti.com> (raw)
OTG base physical address is required in calculating physical address
of endpoint FIFO which is needed by system dma.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta-l0cyMroinI0@public.gmane.org>
---
drivers/usb/musb/musb_core.c | 6 ++++--
drivers/usb/musb/musb_core.h | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4e327f5..adb142d 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1867,7 +1867,8 @@ static void musb_free(struct musb *musb)
* not yet corrected for platform-specific offsets
*/
static int __init
-musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
+musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl,
+ phys_addr_t ctrl_phys_addr)
{
int status;
struct musb *musb;
@@ -1919,6 +1920,7 @@ bad_config:
musb->board_set_power = plat->set_power;
musb->set_clock = plat->set_clock;
musb->min_power = plat->min_power;
+ musb->ctrl_phys_base = ctrl_phys_addr;
/* Clock usage is chip-specific ... functional clock (DaVinci,
* OMAP2430), or PHY ref (some TUSB6010 boards). All this core
@@ -2136,7 +2138,7 @@ static int __init musb_probe(struct platform_device *pdev)
/* clobbered by use_dma=n */
orig_dma_mask = dev->dma_mask;
#endif
- status = musb_init_controller(dev, irq, base);
+ status = musb_init_controller(dev, irq, base, iomem->start);
if (status < 0)
iounmap(base);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index ac17b00..d001894 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -367,6 +367,7 @@ struct musb {
struct device *controller;
void __iomem *ctrl_base;
+ phys_addr_t ctrl_phys_base;
void __iomem *mregs;
#ifdef CONFIG_USB_TUSB6010
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2010-05-12 11:49 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-12 11:49 Ajay Kumar Gupta [this message]
2010-05-12 11:49 ` [PATCH 2/5] musb: use system DMA to fix Inventra DMA issue on RTL-1.4 Ajay Kumar Gupta
[not found] ` <1273664979-493-2-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-05-12 11:49 ` [PATCH 3/5] musb: add function to check if Inventra DMA used Ajay Kumar Gupta
[not found] ` <1273664979-493-3-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-05-12 11:49 ` [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8 Ajay Kumar Gupta
[not found] ` <1273664979-493-4-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-05-12 11:49 ` [PATCH 5/5] musb: dma: use optimal transfer element for sdma Ajay Kumar Gupta
2010-05-12 13:18 ` [PATCH 4/5] musb: use system DMA for unaligned buffers on RTL >= 1.8 Sergei Shtylyov
2010-05-12 13:55 ` Gupta, Ajay Kumar
2010-05-12 14:59 ` Sergei Shtylyov
[not found] ` <4BEAC268.1080601-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>
2010-05-12 17:55 ` Felipe Balbi
2010-05-13 4:14 ` Gupta, Ajay Kumar
[not found] ` <19F8576C6E063C45BE387C64729E7394044E40516A-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-05-13 19:43 ` Felipe Balbi
2010-05-14 4:39 ` Gupta, Ajay Kumar
2010-05-12 17:54 ` Felipe Balbi
2010-05-13 4:13 ` Gupta, Ajay Kumar
[not found] ` <19F8576C6E063C45BE387C64729E7394044E405169-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-05-14 11:06 ` Felipe Balbi
2010-05-14 11:39 ` Gupta, Ajay Kumar
2010-05-12 17:52 ` [PATCH 3/5] musb: add function to check if Inventra DMA used Felipe Balbi
2010-05-12 17:51 ` [PATCH 2/5] musb: use system DMA to fix Inventra DMA issue on RTL-1.4 Felipe Balbi
2010-05-12 17:56 ` Gadiyar, Anand
[not found] ` <5A47E75E594F054BAF48C5E4FC4B92AB03216237DA-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-05-13 4:22 ` Gupta, Ajay Kumar
2010-05-13 8:58 ` Kalliguddi, Hema
2010-05-13 10:10 ` Gupta, Ajay Kumar
2010-05-13 11:57 ` Kalliguddi, Hema
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1273664979-493-1-git-send-email-ajay.gupta@ti.com \
--to=ajay.gupta-l0cymroini0@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).