linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: felipe.balbi@nokia.com
To: Linux OMAP Mailing List <linux-omap@vger.kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Tony Lindgren <tony@atomide.com>,
	David Brownell <david-b@pacbell.net>,
	Andrew Morton <akpm@linux-foundation.org>,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Felipe Balbi <felipe.balbi@nokia.com>
Subject: [PATCH 2/5] arm: omap: gpio: implement set_debounce method
Date: Mon, 17 May 2010 13:02:31 +0300	[thread overview]
Message-ID: <1274090554-19420-3-git-send-email-felipe.balbi@nokia.com> (raw)
In-Reply-To: <1274090554-19420-1-git-send-email-felipe.balbi@nokia.com>

From: Felipe Balbi <felipe.balbi@nokia.com>

OMAP support debouncing of gpio lines, implement
the method using gpiolib.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
---
 arch/arm/plat-omap/gpio.c |   68 +++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 68 insertions(+), 0 deletions(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 45a225d..4a17dc4 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -612,6 +612,59 @@ do {	\
 	__raw_writel(l, base + reg); \
 } while(0)
 
+/**
+ * _set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+		unsigned debounce)
+{
+	void __iomem		*reg = bank->base;
+	u32			val;
+	u32			l;
+
+	if (debounce < 32)
+		debounce = 0x01;
+	else if (debounce > 7936)
+		debounce = 0xff;
+	else
+		debounce = (debounce / 0x1f) - 1;
+
+	l = 1 << get_gpio_index(gpio);
+
+	if (cpu_is_omap44xx())
+		reg += OMAP4_GPIO_DEBOUNCINGTIME;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+
+	__raw_writel(debounce, reg);
+
+	reg = bank->base;
+	if (cpu_is_omap44xx())
+		reg += OMAP4_GPIO_DEBOUNCENABLE;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
+	val = __raw_readl(reg);
+
+	if (debounce) {
+		val |= l;
+		if (cpu_is_omap34xx() || cpu_is_omap44xx())
+			clk_enable(bank->dbck);
+	} else {
+		val &= ~l;
+		if (cpu_is_omap34xx() || cpu_is_omap44xx())
+			clk_disable(bank->dbck);
+	}
+
+	__raw_writel(val, reg);
+}
+
 void omap_set_gpio_debounce(int gpio, int enable)
 {
 	struct gpio_bank *bank;
@@ -1608,6 +1661,20 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
 	return 0;
 }
 
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
+		unsigned debounce)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_debounce(bank, offset, debounce);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
 static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct gpio_bank *bank;
@@ -1860,6 +1927,7 @@ static int __init _omap_gpio_init(void)
 		bank->chip.direction_input = gpio_input;
 		bank->chip.get = gpio_get;
 		bank->chip.direction_output = gpio_output;
+		bank->chip.set_debounce = gpio_debounce;
 		bank->chip.set = gpio_set;
 		bank->chip.to_irq = gpio_2irq;
 		if (bank_is_mpuio(bank)) {
-- 
1.7.1

  parent reply	other threads:[~2010-05-17 10:02 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-17 10:02 [PATCH 0/6] teach gpiolib about gpio debouncing felipe.balbi
2010-05-17 10:02 ` [PATCH 1/5] gpiolib: introduce set_debounce method felipe.balbi
2010-05-20 18:06   ` Andrew Morton
2010-05-20 18:52     ` Felipe Balbi
2010-05-20 19:04     ` Alan Cox
2010-05-20 19:16       ` Andrew Morton
2010-05-20 20:51         ` Alan Cox
2010-05-20 19:45   ` Mark Brown
2010-05-20 22:50     ` David Brownell
2010-05-21  6:49       ` Felipe Balbi
2010-05-21 10:11         ` Alan Cox
2010-05-21 13:14           ` David Brownell
2010-05-21 13:34             ` Alan Cox
2010-05-21 13:23         ` David Brownell
2010-05-21 10:05     ` Alan Cox
2010-05-17 10:02 ` felipe.balbi [this message]
2010-05-17 10:02 ` [PATCH 3/5] arm: omap: switch over to gpio_set_debounce felipe.balbi
2010-06-16 17:26   ` Grazvydas Ignotas
2010-06-17  4:45     ` Felipe Balbi
2010-06-20 17:03       ` Grazvydas Ignotas
2010-06-20 21:12         ` Felipe Balbi
2010-05-17 10:02 ` [PATCH 4/5] arm: omap: remove the unused omap_gpio_set_debounce methods felipe.balbi
2010-05-17 10:02 ` [PATCH 5/5] arm: omap: move all gpio defines to plat/gpio.h felipe.balbi
2010-05-17 10:08   ` Felipe Balbi
2010-05-20 18:04 ` [PATCH 0/6] teach gpiolib about gpio debouncing Andrew Morton
2010-05-20 18:55   ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1274090554-19420-3-git-send-email-felipe.balbi@nokia.com \
    --to=felipe.balbi@nokia.com \
    --cc=akpm@linux-foundation.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=david-b@pacbell.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).