From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Weber Subject: [PATCH 00/14] Multiple fixes for Devkit8000 Date: Tue, 18 May 2010 14:05:21 +0200 Message-ID: <1274184335-29322-1-git-send-email-weber@corscience.de> Return-path: Received: from moutng.kundenserver.de ([212.227.17.8]:54916 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757414Ab0ERMGF (ORCPT ); Tue, 18 May 2010 08:06:05 -0400 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Cc: tony@atomide.com, Thomas Weber Some of these patches were submitted earlier but got no comments so I am sending them one more time. These patches correct errors that were done while using the board code from beagle board for Devkit8000. The Devkit8000 uses the TPS65930, an reduced version of the TWL4030. So not all power supplies from the TWL4030 are available. There were also a wrong comment about the pins supported by the vmmc1. The DSS2 do not need a VDVI any longer so it is removed. The definition of the supplies are changed to use the new REGULATOR_SUPPLY macro. The pins for lcd and dvi powerdown are corrected. Kan-Ru Chen (1): OMAP2: Devkit8000: Setup LCD reset Thomas Weber (13): OMAP2: Devkit8000: Cleanup for supplies OMAP2: Devkit8000: change lcd panel to generic OMAP2: Devkit8000: Enable DVI-D output OMAP2: Devkit8000: Remove unneeded VDVI OMAP2: Devkit8000: Remove nonexisting vsim OMAP2: Devkit8000: Remove en-/disable for tv panel OMAP2: Devkit8000: Use the REGULATOR_SUPPLY macro OMAP2: Devkit8000: Fixing comment about pins used OMAP2: Devkit8000: Fix whitespace with tab OMAP2: Devkit8000: Fix comment OMAP2: Devkit8000: Using gpio_is_valid OMAP2: Devkit8000: Remove unused omap_board_config OMAP2: Devkit8000: Correct regulator arch/arm/mach-omap2/board-devkit8000.c | 125 +++++++++++++++----------------- 1 files changed, 58 insertions(+), 67 deletions(-)