From: Thomas Weber <weber@corscience.de>
To: linux-omap@vger.kernel.org
Cc: tony@atomide.com, Thomas Weber <weber@corscience.de>
Subject: [PATCH 01/14] OMAP2: Devkit8000: Cleanup for supplies
Date: Tue, 18 May 2010 14:05:22 +0200 [thread overview]
Message-ID: <1274184335-29322-2-git-send-email-weber@corscience.de> (raw)
In-Reply-To: <1274184335-29322-1-git-send-email-weber@corscience.de>
Corrected the wrong supplies in devkit8000 code.
Add supply for ads7846 to support the new regulator framework for
touchscreen.
Signed-off-by: Thomas Weber <weber@corscience.de>
---
arch/arm/mach-omap2/board-devkit8000.c | 32 ++++++++++++++++++++++++++------
1 files changed, 26 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 6d910df..887e1a1 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -168,6 +168,10 @@ static struct regulator_consumer_supply devkit8000_vsim_supply = {
.supply = "vmmc_aux",
};
+/* ads7846 on SPI */
+static struct regulator_consumer_supply devkit8000_vio_supplies[] = {
+ REGULATOR_SUPPLY("vcc", "spi2.0")
+};
static struct omap_dss_device devkit8000_lcd_device = {
.name = "lcd",
@@ -282,7 +286,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
.setup = devkit8000_twl_gpio_setup,
};
-static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
+static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
{
.supply = "vdvi",
.dev = &devkit8000_lcd_device.dev,
@@ -337,8 +341,8 @@ static struct regulator_init_data devkit8000_vdac = {
.consumer_supplies = &devkit8000_vdda_dac_supply,
};
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data devkit8000_vpll2 = {
+/* VPLL1 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll1 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
@@ -348,8 +352,23 @@ static struct regulator_init_data devkit8000_vpll2 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll2_supplies),
- .consumer_supplies = devkit8000_vpll2_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll1_supplies),
+ .consumer_supplies = devkit8000_vpll1_supplies,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data devkit8000_vio = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supplies),
+ .consumer_supplies = devkit8000_vio_supplies,
};
static struct twl4030_usb_data devkit8000_usb_data = {
@@ -376,7 +395,8 @@ static struct twl4030_platform_data devkit8000_twldata = {
.vmmc1 = &devkit8000_vmmc1,
.vsim = &devkit8000_vsim,
.vdac = &devkit8000_vdac,
- .vpll2 = &devkit8000_vpll2,
+ .vpll1 = &devkit8000_vpll1,
+ .vio = &devkit8000_vio,
.keypad = &devkit8000_kp_data,
};
--
1.6.4.4
next prev parent reply other threads:[~2010-05-18 12:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-18 12:05 [PATCH 00/14] Multiple fixes for Devkit8000 Thomas Weber
2010-05-18 12:05 ` Thomas Weber [this message]
2010-05-18 12:05 ` [PATCH 02/14] OMAP2: Devkit8000: change lcd panel to generic Thomas Weber
2010-05-18 12:05 ` [PATCH 03/14] OMAP2: Devkit8000: Enable DVI-D output Thomas Weber
2010-05-18 12:05 ` [PATCH 04/14] OMAP2: Devkit8000: Setup LCD reset Thomas Weber
2010-05-18 12:05 ` [PATCH 05/14] OMAP2: Devkit8000: Remove unneeded VDVI Thomas Weber
2010-05-18 12:05 ` [PATCH 06/14] OMAP2: Devkit8000: Remove nonexisting vsim Thomas Weber
2010-05-18 12:05 ` [PATCH 07/14] OMAP2: Devkit8000: Remove en-/disable for tv panel Thomas Weber
2010-05-18 12:05 ` [PATCH 08/14] OMAP2: Devkit8000: Use the REGULATOR_SUPPLY macro Thomas Weber
2010-05-18 12:05 ` [PATCH 09/14] OMAP2: Devkit8000: Fixing comment about pins used Thomas Weber
2010-05-18 12:05 ` [PATCH 10/14] OMAP2: Devkit8000: Fix whitespace with tab Thomas Weber
2010-05-18 12:05 ` [PATCH 11/14] OMAP2: Devkit8000: Fix comment Thomas Weber
2010-05-18 12:05 ` [PATCH 12/14] OMAP2: Devkit8000: Using gpio_is_valid Thomas Weber
2010-05-18 12:05 ` [PATCH 13/14] OMAP2: Devkit8000: Remove unused omap_board_config Thomas Weber
2010-05-18 12:05 ` [PATCH 14/14] OMAP2: Devkit8000: Correct regulator Thomas Weber
2010-05-19 4:02 ` [PATCH 00/14] Multiple fixes for Devkit8000 Kan-Ru Chen
2010-06-01 5:36 ` Thomas Weber
2010-06-01 8:32 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1274184335-29322-2-git-send-email-weber@corscience.de \
--to=weber@corscience.de \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).