linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Charulatha V <charu@ti.com>
To: linux-omap@vger.kernel.org
Cc: rnayak@ti.com, paul@pwsan.com, tony@atomide.com,
	khilman@deeprootsystems.com, Charulatha V <charu@ti.com>
Subject: [PATCH 07/11] OMAP: GPIO: add GPIO hwmods structures for OMAP242X
Date: Tue, 18 May 2010 20:20:56 +0530	[thread overview]
Message-ID: <1274194260-16401-8-git-send-email-charu@ti.com> (raw)
In-Reply-To: <1274194260-16401-7-git-send-email-charu@ti.com>

Add hwmod structures for GPIO module on OMAP242X

Signed-off-by: Charulatha V <charu@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_2420_data.c |  222 ++++++++++++++++++++++++++++
 1 files changed, 222 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index eb7ee24..4d05a9a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -15,6 +15,7 @@
 #include <mach/irqs.h>
 #include <plat/cpu.h>
 #include <plat/dma.h>
+#include <plat/gpio.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -32,6 +33,10 @@
 static struct omap_hwmod omap2420_mpu_hwmod;
 static struct omap_hwmod omap2420_l3_hwmod;
 static struct omap_hwmod omap2420_l4_core_hwmod;
+static struct omap_hwmod omap2420_gpio1_hwmod;
+static struct omap_hwmod omap2420_gpio2_hwmod;
+static struct omap_hwmod omap2420_gpio3_hwmod;
+static struct omap_hwmod omap2420_gpio4_hwmod;
 
 /* L3 -> L4_CORE interface */
 static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
@@ -87,6 +92,78 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
 	&omap2420_l4_core__l4_wkup,
 };
 
+/* L4 WKUP -> GPIO1 interface */
+static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = {
+	{
+		.pa_start	= OMAP242X_GPIO1_BASE,
+		.pa_end		= OMAP242X_GPIO1_BASE + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio1_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> GPIO2 interface */
+static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = {
+	{
+		.pa_start	= OMAP242X_GPIO2_BASE,
+		.pa_end		= OMAP242X_GPIO2_BASE + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio2_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> GPIO3 interface */
+static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = {
+	{
+		.pa_start	= OMAP242X_GPIO3_BASE,
+		.pa_end		= OMAP242X_GPIO3_BASE + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio3_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 WKUP -> GPIO4 interface */
+static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = {
+	{
+		.pa_start	= OMAP242X_GPIO4_BASE,
+		.pa_end		= OMAP242X_GPIO4_BASE + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio4_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio4_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio4_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* L4 CORE */
 static struct omap_hwmod omap2420_l4_core_hwmod = {
 	.name		= "l4_core_hwmod",
@@ -101,6 +178,10 @@ static struct omap_hwmod omap2420_l4_core_hwmod = {
 /* Slave interfaces on the L4_WKUP interconnect */
 static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
 	&omap2420_l4_core__l4_wkup,
+	&omap2420_l4_wkup__gpio1,
+	&omap2420_l4_wkup__gpio2,
+	&omap2420_l4_wkup__gpio3,
+	&omap2420_l4_wkup__gpio4,
 };
 
 /* Master interfaces on the L4_WKUP interconnect */
@@ -133,11 +214,152 @@ static struct omap_hwmod omap2420_mpu_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
 
+/* GPIO common */
+
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.gpio_bank_count = 4,
+	.gpio_bank_bits = 32,
+	.dbck_flag = false,
+	.fck_flag = true,
+};
+
+static struct omap_hwmod_class_sysconfig gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class gpio_class = {
+	.name = "gpio",
+	.sysc = &gpio_sysc,
+};
+
+/* GPIO1 */
+
+static struct omap_hwmod_irq_info gpio1_mpu_irqs[] = {
+	{ .name = "gpio_mpu_irq", .irq = INT_24XX_GPIO_BANK1 },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
+	&omap2420_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap2420_gpio1_hwmod = {
+	.name		= "gpio1_hwmod",
+	.mpu_irqs	= gpio1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(gpio1_mpu_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio1_slaves),
+	.class		= &gpio_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* GPIO2 */
+
+static struct omap_hwmod_irq_info gpio2_mpu_irqs[] = {
+	{ .name = "gpio_mpu_irq", .irq = INT_24XX_GPIO_BANK2 },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
+	&omap2420_l4_wkup__gpio2,
+};
+
+static struct omap_hwmod omap2420_gpio2_hwmod = {
+	.name		= "gpio2_hwmod",
+	.mpu_irqs	= gpio2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(gpio2_mpu_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio2_slaves),
+	.class		= &gpio_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* GPIO3 */
+
+static struct omap_hwmod_irq_info gpio3_mpu_irqs[] = {
+	{ .name = "gpio_mpu_irq", .irq = INT_24XX_GPIO_BANK3 },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
+	&omap2420_l4_wkup__gpio3,
+};
+
+static struct omap_hwmod omap2420_gpio3_hwmod = {
+	.name		= "gpio3_hwmod",
+	.mpu_irqs	= gpio3_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(gpio3_mpu_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio3_slaves),
+	.class		= &gpio_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* GPIO4 */
+
+static struct omap_hwmod_irq_info gpio4_mpu_irqs[] = {
+	{ .name = "gpio_mpu_irq", .irq = INT_24XX_GPIO_BANK4 },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
+	&omap2420_l4_wkup__gpio4,
+};
+
+static struct omap_hwmod omap2420_gpio4_hwmod = {
+	.name		= "gpio4_hwmod",
+	.mpu_irqs	= gpio4_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(gpio4_mpu_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio4_slaves),
+	.class		= &gpio_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
 static __initdata struct omap_hwmod *omap2420_hwmods[] = {
 	&omap2420_l3_hwmod,
 	&omap2420_l4_core_hwmod,
 	&omap2420_l4_wkup_hwmod,
 	&omap2420_mpu_hwmod,
+	&omap2420_gpio1_hwmod,
+	&omap2420_gpio2_hwmod,
+	&omap2420_gpio3_hwmod,
+	&omap2420_gpio4_hwmod,
 	NULL,
 };
 
-- 
1.6.3.3


  reply	other threads:[~2010-05-18 14:49 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-18 14:50 [PATCH 00/11] OMAP: GPIO: Implement GPIO in HWMOD way Charulatha V
2010-05-18 14:50 ` [PATCH 01/11] OMAP: GPIO: Modify init() in preparation for platform device implementation Charulatha V
2010-05-18 14:50   ` [PATCH 02/11] OMAP: GPIO: Include platform_data structure for GPIO Charulatha V
2010-05-18 14:50     ` [PATCH 03/11] OMAP: GPIO: Introduce support for OMAP15xx chip GPIO init Charulatha V
2010-05-18 14:50       ` [PATCH 04/11] OMAP: GPIO: Introduce support for OMAP16xx " Charulatha V
2010-05-18 14:50         ` [PATCH 05/11] OMAP: GPIO: Introduce support for OMAP7xx " Charulatha V
2010-05-18 14:50           ` [PATCH 06/11] OMAP: GPIO: add GPIO hwmods structures for OMAP3 Charulatha V
2010-05-18 14:50             ` Charulatha V [this message]
2010-05-18 14:50               ` [PATCH 08/11] OMAP: GPIO: add GPIO hwmods structures for OMAP243X Charulatha V
2010-05-18 14:50                 ` [PATCH 09/11] OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init Charulatha V
2010-05-18 14:50                   ` [PATCH 10/11] OMAP: GPIO: Implement GPIO as a platform device Charulatha V
2010-05-18 14:51                     ` [PATCH 11/11] OMAP: GPIO: Remove omap_gpio_init() Charulatha V
     [not found]                     ` <4BF2CD67.3090208@ti.com>
     [not found]                       ` <EAF47CD23C76F840A9E7FCE10091EFAB02C5666252@dbde02.ent.ti.com>
2010-05-19  7:50                         ` [PATCH 10/11] OMAP: GPIO: Implement GPIO as a platform device Cousson, Benoit
2010-05-20 16:36                           ` Kevin Hilman
2010-06-03 18:58                     ` Kevin Hilman
2010-06-04  6:05                       ` Felipe Balbi
2010-05-18 23:46                   ` [PATCH 09/11] OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init Tony Lindgren
2010-05-19  7:26                     ` Varadarajan, Charulatha
2010-06-03 18:36                   ` Kevin Hilman
2010-06-03 18:31               ` [PATCH 07/11] OMAP: GPIO: add GPIO hwmods structures for OMAP242X Kevin Hilman
2010-06-03 18:30             ` [PATCH 06/11] OMAP: GPIO: add GPIO hwmods structures for OMAP3 Kevin Hilman
2010-05-18 23:41   ` [PATCH 01/11] OMAP: GPIO: Modify init() in preparation for platform device implementation Tony Lindgren
2010-05-19  7:23     ` Varadarajan, Charulatha
2010-05-19  8:01       ` Benoit Cousson
2010-05-19 13:57         ` Varadarajan, Charulatha
2010-05-19 15:32           ` Benoit Cousson
2010-05-18 23:42 ` [PATCH 00/11] OMAP: GPIO: Implement GPIO in HWMOD way Tony Lindgren
2010-05-19  7:30   ` Varadarajan, Charulatha
2010-06-03 18:21     ` Kevin Hilman
2010-05-19  8:54 ` Benoit Cousson
2010-05-19 13:55   ` Varadarajan, Charulatha
2010-05-19 15:24     ` Benoit Cousson
2010-06-03 18:46 ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1274194260-16401-8-git-send-email-charu@ti.com \
    --to=charu@ti.com \
    --cc=khilman@deeprootsystems.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=rnayak@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).