From: Kevin Hilman <khilman@deeprootsystems.com>
To: linux-omap@vger.kernel.org
Subject: [PATCH pm-wip/uart 2/4] OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
Date: Wed, 26 May 2010 16:05:13 -0700 [thread overview]
Message-ID: <1274915115-28355-3-git-send-email-khilman@deeprootsystems.com> (raw)
In-Reply-To: <1274915115-28355-1-git-send-email-khilman@deeprootsystems.com>
Since these hwmods do not have IDLEST, set the HWMOD_NO_IDLEST flag,
otherwise _enable() will fail due to failing _wait_target_ready().
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 9 ++++++---
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 9 ++++++---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 12 ++++++++----
3 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index bbe3006..b9a957d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -66,7 +66,8 @@ static struct omap_hwmod omap2420_l3_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2420_l3_masters),
.slaves = omap2420_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod omap2420_l4_wkup_hwmod;
@@ -156,7 +157,8 @@ static struct omap_hwmod omap2420_l4_core_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
};
/* Slave interfaces on the L4_WKUP interconnect */
@@ -176,7 +178,8 @@ static struct omap_hwmod omap2420_l4_wkup_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
};
/* Master interfaces on the MPU device */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 45767b1..d7faef2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -66,7 +66,8 @@ static struct omap_hwmod omap2430_l3_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2430_l3_masters),
.slaves = omap2430_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+ .flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod omap2430_l4_wkup_hwmod;
@@ -155,7 +156,8 @@ static struct omap_hwmod omap2430_l4_core_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Slave interfaces on the L4_WKUP interconnect */
@@ -178,7 +180,8 @@ static struct omap_hwmod omap2430_l4_wkup_hwmod = {
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Master interfaces on the MPU device */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 5bf8690..6bc1173 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -77,7 +77,8 @@ static struct omap_hwmod omap3xxx_l3_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_l3_masters),
.slaves = omap3xxx_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
@@ -185,7 +186,8 @@ static struct omap_hwmod omap3xxx_l4_core_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_l4_core_masters),
.slaves = omap3xxx_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Slave interfaces on the L4_PER interconnect */
@@ -207,7 +209,8 @@ static struct omap_hwmod omap3xxx_l4_per_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_l4_per_masters),
.slaves = omap3xxx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Slave interfaces on the L4_WKUP interconnect */
@@ -227,7 +230,8 @@ static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_masters),
.slaves = omap3xxx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_NO_IDLEST,
};
/* Master interfaces on the MPU device */
--
1.7.0.2
next prev parent reply other threads:[~2010-05-26 23:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-26 23:05 [PATCH pm-wip/uart 0/4] misc. fixes for IDLEST and OMAP24xx support Kevin Hilman
2010-05-26 23:05 ` [PATCH pm-wip/uart 1/4] OMAP3: hwmod: UART: add module offs Kevin Hilman
2010-05-26 23:05 ` Kevin Hilman [this message]
2010-05-26 23:05 ` [PATCH pm-wip/uart 3/4] OMAP2420: hwmod: UART3 needs prcm_reg_id = 2 Kevin Hilman
2010-05-26 23:05 ` [PATCH pm-wip/uart 4/4] 24xx: need .module_offs = CORE_MOD Kevin Hilman
2010-05-27 21:06 ` [PATCH pm-wip/uart 0/4] misc. fixes for IDLEST and OMAP24xx support Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1274915115-28355-3-git-send-email-khilman@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).